I'm designing business cards and made my image to scale but when I try to print it says there are resolution problems. I'm not sure what to do. I set the print size to 3.5 inches wides by 2 inches tall but every time I upload it to the print company it say low resolution poor quality.
View 2 RepliesI am making new business cards using CorelDraw. When I save the business card to a PDF file and download it to Vistaprint, the text does not look sharp as it does in CorelDraw. Is there a way to download without being blurry?
View 7 Replies View RelatedI just started using GIMP to try to design a business card that is of acceptable quality for printing. The company that's going to do the printing says they need to be 300 dpi or better. I know nothing about this. What filetype would be best for that purpose and what software I need to create a design quickly and easily?
View 3 Replies View RelatedI am about to print business cards? Where is the best place to get QUALITY (not Vista Print) cards done?
View 14 Replies View RelatedI have Photoshop 7 and I want to create some business cards in Photoshop and then print them.
How do I set it up so that it will print out on those business card sheets correctly?
In page setup i have setup my page to print 4 business cards on an A4 page. I have customize the labels myself. Then in print preview i have chosen to print the business cards in the center of the page. But the cards are on the bottom left corner and what ever i do it will not change.
maybe i have to change the margins in page setup-customize label? But don't know the inches.
How can i put my 4 business cards in the center of the page to print?
OS WinXP and Win Vista 64 bit.
To print business cards, I selected Label AVERY 5371 - 2X 3.5 BusCr. Print preview looks good. There is no any visible alignment problems.
When printing is completed (Linen paper AVERY 5371), there is about 2 millimeters alignment problem for each card. I created my own template and the print is with the same results. The printer I use is Canon MP830 ink jet.
I have CorelDraw Graphics Suite X6. I have created what I want in the end to be a double sided business card. However, when printing I am unable to get what will be the back design to align with the front design. Does Coreldraw have a option of sort to make this happen automatically? Or is there a technique to make this happen?
View 5 Replies View RelatedI am using two different types of raster ECW and MrSid. ECW file resolution goes way down when plotting. They look like blocks. MrSid files look fuzzy but alot better than ECWs. I've tried RASTERTHRESHOLD, and RASTERPERCENT. Both are set to 90. Using HP6100ps.
Images are fine when using Imageinsert.
Is there a setting i'm missing somewhere for them?
I understand GIMP may not be the best program to use to create business cards but as a start-up I need a cheap/free program!! Anyway I have designed the cards and am having them professionally printed but when I did a test print on my home computer, the quality seems very poor. Mainly the text is blurry. It looks fine on my screen though.
View 1 Replies View RelatedI am trying to create an image to use for my business cards and I have come up with 4 cards all using the same design. Please let me know which you all think would be better.
Business Card 1
Business Card 2
Business Card 3
Business Card 4
Note: These were created with photoshop.
Long-term user of CorelDraw, and have just found Xara P&GD, which is quite a revelation. I've re-designed my business card and how to print to A4, pre-perforated card. CorelDraw can make use of Avery templates for printing the single business card design, multiple times, on the same sheet of card, but I can't find a way to do this with Xara without physically copying the design to make a composite A4 layout. Can Xara do this the "template" way?
View 9 Replies View RelatedI am preparing some business cards and wish to include a couple of email address as text not as blue, underlined links. They keep showing up as links and I can't seem to find a way of making them just text. I'm rather new at this
View 10 Replies View Relatedi have created a business card for a client. i made it 3.5 in wide and 2 in high. i also added 1/8 in on all sides for bleed and cutting. i want to make a page containing 8 cards per page. i went to automate/picture package in p/s cs and found i can make a page, but not with the images sized to make business cards.
View 2 Replies View RelatedThe powerful new XD7 LIVE COPY and EDITING INSIDE GROUPS features are really useful if you need to create a sheet of business cards. Create your business card and then set it as a LIVE COPY and repeat it on page. Now if you need to make a change later to the business card all the other copies of the business card change automatically.
Attached is a sample (.xar) to play around with.
If you're not familiar with LIVE COPY or EDITING INSIDE GROUPS in XD7, I recommend you watch Xhris's excellent videos at [URL]....
I understand there's a plugin that can increase the quality of a low resolution JPG, smoothing out the pixel effect. which one it is, if it exists?
View 3 Replies View RelatedI am designing my Business Card in PS. Now my business card has a back and front...In illustrator I would create two Artboards. What would I do in Photoshop? Do I extend the canvas to double the size? Or do I create a seperate file for the backside?
What is the correct way from a printing perspective?
My printer (digital printer) tells me that they dont recommend having any borders on their cards as during the printing /cutting process the edges may be trimmed 1mm in a random manner and thus offsetting a nice even border.
Is there anyway to combat this or do I need to go to a specific type of printer?
Or do I just setup the file and hope the random edge cut/print/positioning goes my way?
Id love to get a small white 1mm/2mm edge on the left and top of my card if possible, bottom doesnt matter as its allready white and right edge there doesnt need to be one.
How do I get templates together with text and pictures to make business cards?
View 5 Replies View RelatedDesigned a business card and want to print to Avery type sheet cards and can't find the Avery selection in my printer settings. Just learnig CD X3
View 8 Replies View RelatedI am trying to make business cards in Adobe Illustrator using the Pantone Color System. In my logo, the middle circle is a dark grey: C20 Y20 M20 K80. I can't find a suitable Pantone grey that is this dark. Pantone 425U is too light. Also, which Pantone Black is the darkest?
View 21 Replies View RelatedI drew up a logo design a while ago and when I finally printed it, I realized I know nothing about scaling my drawing to an actual real printed size. Is there a way to know the size in inches and/or a way to see it on the page (i.e. a print preview). Also, when I do print, it's majorly fuzzy for some reason.
View 1 Replies View RelatedI created a video in Video Studio Pro 5. I published to a MPEG4 file to play back and check my results. The file opened with Quicktime and the video looked fine. So I went ahead and burned the video to a DVD using the Share feature, where it created a VOB file. When the VOB file opens in Windows Media Player, it loses resolution. The worst parts of the fuzzy video are the MPEG4 files that I imported into video studio. They are 1080 HD files so I thought they should look ok and, in fact, they look fine in Quicktime. But I also imported JPG's and they look fuzzy as well. How can I burn to a DVD without losing resolution?
View 11 Replies View RelatedUsing Corel VideoStudio Pro X3 and either Corel DVD Moviefactory 7SE or Corel DVDFactory Pro 2010, the playback quality of the burned disks is poor. While the completed project has excellent quality both direct from the hard drive AND when using Windows Explorer and just copying directly to the DVD, anytime I attempt to create a simple menu structure, it seems that the entire video is re-rendered causing a significant loss in video quality from the original. I have tried all settings in both packages even just including the created 660MB mpeg4 (rather than the project itself) in Pro 2010 and the result is a 220MB file. Again, when I just use Windows Explorer and copy directly the DVD, the original video is preserved including the 660MB file size and the quality is the same as the project.
View 9 Replies View RelatedI am using the pro x4. My photos are of poor quality on my completed DVD. this has not always been the case. my photos are high resolution taken with a Nikon d5000. there was a recent update and I am not sure if it required some setting changes.
View 4 Replies View RelatedI'm using the 30 day trial of VisualStudio x6 to create a DVD from multiple different video sources (MOV, MP4, MPG, WMV etc) that are all recorded in HD or near HD qulity. The total size of all these videos on my HDD is upwards of 7Gb. My problem is, when I burn the DVD it compresses down to just over 950Mb and the quality is noticably degraded.
I realize there will be some quality loss going from source to DVD but is there anything I can change in the settings to achieve the highest quality DVD output? It seems like from 7Gb to 950Mb, its not even trying to maintain any quality. Not even half the single layer DVD disc gets filled. I also have DL DVD's to burn to. Basically, I want the highest quality DVD from these HD sources regardless of final output size.
animations after being saved in Imageready result in poorer qulity than usual even though it's set to 256 colors. The settings in my optomize pallet are gif, lossy:0, custom, colors:256, diffusion, dither:100%. Usually the default settings are jpeg high but I can't save as a gif with those settings where I'm sure I could before today.
View 1 Replies View Relatedcorrection of poor quality?
View 5 Replies View RelatedI'm working on a project where I need to export hundreds of custom images for use on a website. Each image needs to have a watermark on it. So I created the watermark in Illustrator, then placed it into a 900 pixel x 900 pixel file and saved for web as a PNG-24 with transparency.
When I export images form LR3 using the above graphic as a watermark the image quality is great, but the watermark has rough edges and is pixelated at any setting under 2500 pixels. I need to output down as small as 150, 225 and 250 pixels. I can do this in photoshop and the watermark looks great. Yet from LR the quality is noticably bad. See the attached file.
how to improve the quality of the watermark?
I've just recently starting using After Effects and it's very impressive.I purchased a project file from videohive.com, it's a few seconeds long and is basically a logo reveal.I opened up the placeholder where the logo is meant to sit, and I imported a vector version of our logo and added the text.
The problem is, everything within the placeholder seems to be of very poor quality before and after the video is rendered. URL....
Is there something I am doing wrong here? The "values and achievement" text is of high quality with no blurring or pixelation, the same goes for the blue surrounding effects, but anything within "logo" (as it is called on the timeline), is very poor as you can see from the video.
I've recently updated to cs6 and was looking forward to the video editing aspect. Very familiar with iMovie, and don't like the somewhat limited adjustments. Unfortunately, when I rendered my first video in CS6, the quality was horrible.
View 10 Replies View Related