CorelDRAW X6 :: Printing Business Cards In Center Of Page
May 29, 2013
In page setup i have setup my page to print 4 business cards on an A4 page. I have customize the labels myself. Then in print preview i have chosen to print the business cards in the center of the page. But the cards are on the bottom left corner and what ever i do it will not change.
maybe i have to change the margins in page setup-customize label? But don't know the inches.
How can i put my 4 business cards in the center of the page to print?
To print business cards, I selected Label AVERY 5371 - 2X 3.5 BusCr. Print preview looks good. There is no any visible alignment problems.
When printing is completed (Linen paper AVERY 5371), there is about 2 millimeters alignment problem for each card. I created my own template and the print is with the same results. The printer I use is Canon MP830 ink jet.
I have CorelDraw Graphics Suite X6. I have created what I want in the end to be a double sided business card. However, when printing I am unable to get what will be the back design to align with the front design. Does Coreldraw have a option of sort to make this happen automatically? Or is there a technique to make this happen?
I'm designing business cards and made my image to scale but when I try to print it says there are resolution problems. I'm not sure what to do. I set the print size to 3.5 inches wides by 2 inches tall but every time I upload it to the print company it say low resolution poor quality.
I am preparing some business cards and wish to include a couple of email address as text not as blue, underlined links. They keep showing up as links and I can't seem to find a way of making them just text. I'm rather new at this
I am making new business cards using CorelDraw. When I save the business card to a PDF file and download it to Vistaprint, the text does not look sharp as it does in CorelDraw. Is there a way to download without being blurry?
I created a photo card in Photoshop Elements 11. When I try and print the card it prints on 3 seperate pages, the front of the card, the inside top of the card and the inside bottom of the card. How do I get it to print the inside of the card on one page? I am using the Mac version
As indicated by title I have just switched to a newer computer from a system using XP and corel draw 8 to a new system using Win7 and corel draw X3 and using the same printer (buisness inkjet 2230). I have never had any problems printing before but now every time i print my pages are offset to the right. The only solution I have found is that I can change the printer page (in print preview) to the left. But though my many attempts to do this works fine, saving it as a default just won't work. After saving as default next time I open a document it switches to old layout. I have even tried going to print defaults folder, deleting all corel's defaults, and then saving and somehow it just reverts back to regular settings. make life simpler than changing print area every time?
I am trying to create an image to use for my business cards and I have come up with 4 cards all using the same design. Please let me know which you all think would be better.
Business Card 1 Business Card 2 Business Card 3 Business Card 4
Long-term user of CorelDraw, and have just found Xara P&GD, which is quite a revelation. I've re-designed my business card and how to print to A4, pre-perforated card. CorelDraw can make use of Avery templates for printing the single business card design, multiple times, on the same sheet of card, but I can't find a way to do this with Xara without physically copying the design to make a composite A4 layout. Can Xara do this the "template" way?
i have created a business card for a client. i made it 3.5 in wide and 2 in high. i also added 1/8 in on all sides for bleed and cutting. i want to make a page containing 8 cards per page. i went to automate/picture package in p/s cs and found i can make a page, but not with the images sized to make business cards.
The powerful new XD7 LIVE COPY and EDITING INSIDE GROUPS features are really useful if you need to create a sheet of business cards. Create your business card and then set it as a LIVE COPY and repeat it on page. Now if you need to make a change later to the business card all the other copies of the business card change automatically.
Attached is a sample (.xar) to play around with.
If you're not familiar with LIVE COPY or EDITING INSIDE GROUPS in XD7, I recommend you watch Xhris's excellent videos at [URL]....
I am designing my Business Card in PS. Now my business card has a back and front...In illustrator I would create two Artboards. What would I do in Photoshop? Do I extend the canvas to double the size? Or do I create a seperate file for the backside?
What is the correct way from a printing perspective?
My printer (digital printer) tells me that they dont recommend having any borders on their cards as during the printing /cutting process the edges may be trimmed 1mm in a random manner and thus offsetting a nice even border.
Is there anyway to combat this or do I need to go to a specific type of printer?
Or do I just setup the file and hope the random edge cut/print/positioning goes my way?
Id love to get a small white 1mm/2mm edge on the left and top of my card if possible, bottom doesnt matter as its allready white and right edge there doesnt need to be one.
I just started using GIMP to try to design a business card that is of acceptable quality for printing. The company that's going to do the printing says they need to be 300 dpi or better. I know nothing about this. What filetype would be best for that purpose and what software I need to create a design quickly and easily?
I am trying to make business cards in Adobe Illustrator using the Pantone Color System. In my logo, the middle circle is a dark grey: C20 Y20 M20 K80. I can't find a suitable Pantone grey that is this dark. Pantone 425U is too light. Also, which Pantone Black is the darkest?
I am trying to center objects in the page but for some reason the Object Position is not working. I am doing a 24x36 poster and when I type 12 in to center the object it is not working.
I have a drawing completed but I cannot seem to get the page setup correctly for printing. My drawing is 1:1 and when i go to print preview the page is so much bigger than the drawing. How do I resize this and save the setting. Can I save this setting?
I was just fooling around with it one day and I made 2 guidlines intersect (one at 0 degrees and one at 90). I added a third one at 45 and tried to center it at the intersection of the first 2. It made a tiny tiny microscopic right triangle for some reason.
Also, sometimes the center is off on either the object or on the page. Like when I rotate copies of an object around another object (like making a clock face) the copies don't go perfectly all the way around. I redo it and it works fine.
I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
I recently upgraded to CorelDRAW X5 from X4. I'm having problems printing a landscape page to an Epson Stylus Pro 7880. This is a paper roll feeder. No matter what combination of settings I try it will only print portrait orientation. I had zero problems with X4. I have read as many of the previous forum posts I could find on this issue, so I'll add - I don't have a PPD file and the manufacturer does not either.
I was playing around with my settings and did something that is keeping me from printing. When I go to print preview, the page is blank. I have tried opening up jobs that I successfully printed before and they also show and print blank. Everything looks normal in the work area. I just can't print.
I am an administrator on a Facebook business page and want to create albums and upload photos on this business page. I access the business page through my personal Facebook page. Lightroom authorizes with my personal page and I can upload photos to it no problem but I can't see how to give Lightroom access to the business page
Elements keep trying to link me to my personal facebook page. How to tell it to post to my facebook photography business page? I used to have this option in lightroom.
