CorelDRAW X5 :: Printing Landscape Page To Epson Stylus Pro 788
Feb 6, 2013
I recently upgraded to CorelDRAW X5 from X4. I'm having problems printing a landscape page to an Epson Stylus Pro 7880. This is a paper roll feeder. No matter what combination of settings I try it will only print portrait orientation. I had zero problems with X4. I have read as many of the previous forum posts I could find on this issue, so I'll add - I don't have a PPD file and the manufacturer does not either.
View 9 Replies
ADVERTISEMENT
Dec 15, 2012
CS6, no page setup? I see no option permitting me to choose landscape or portrait view. I'm using mountain lion and a canon mp560. There's nothing under print settings. "layout direction" Is it a compatibility problem between CS6 and my printer? Is there a workaround?
View 5 Replies
View Related
May 24, 2009
Is anyone using the Epson Stylus Photo 890 with Vista 64 bit? I cannot find drivers or profiles for that combination of OS and Printer. I have searched everywhere on the web.I need drivers or this printer is history ( yes it already is history but still works fine otherwise).
View 2 Replies
View Related
Dec 16, 2012
When I try to print a photo thru Photoshop to Epson stylus photo 2200, I get a meassge: paper out or not loaded correctly. Photoshop will print to another printer and the Epson will print from other appllications such as Word. It seem Photoshop and Epson are not communicating properly. The p[rintilng gliltch followed on the heels of Epson printing several images that were nowhere close to the images in Photoshop. recently, I added somw upadtes — a driver and at least one program update. I un;installed and reinstalled the CS 5, but the problem persists.
View 3 Replies
View Related
Sep 22, 2011
when we set a document to print in landscape in Corel and then leave it as portrait in the printing preferences, it will print landscape which is fine, then if you put it to landscape in print preferences (still having it as landscape in the program) it will print portrait!
and
if we set a document to print in landscape in Corel and then leave it as portrait in the printing preferences, it will print landscape which is fine, then print 1 copy it will stay at landscape, if you then print 3 copies it will switch to portrait.
Both of the above are happening on a HP 5550 laser printer, we have 4 classrooms each with a 5550 printer in.
View 10 Replies
View Related
Mar 8, 2012
I cannot get the printer to print in landscape since we loaded X5.
View 1 Replies
View Related
May 18, 2009
I have recently upgraded my system to Vista 64 and PS CS4 from Windows XP and PS CS3. Now when I print my photos have a severe green cast. I have tried turning off CM at the printer, in PS, both and on in each place and both, nothing seems to work. I have DL'd the paper profiles as well, still doesn't work.
View 3 Replies
View Related
Jan 3, 2012
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years. I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy. One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi. I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Note, When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
View 6 Replies
View Related
Apr 10, 2012
I have a iMac 27" Mac with OSX Lion running Photoshop CS5...When i print to my Epson Stylus 1400 color printer I get the following error message...Disc Not Available...All other printing works
View 1 Replies
View Related
Apr 27, 2012
I don't understand why Lightroom will not send print commands properly to my Epson Stylus Photo 1400, but all I get is error.
Since the printer works with every other program on my computer, including Elements, it must be a Lightroom problem.
View 2 Replies
View Related
Jun 23, 2012
I am trying to print film for screen printing using an epson 1100 workforce. I am not able to select the 'advance setting' box under the separations tab when I try to print separations. I am trying to be able to choose the dot
View 1 Replies
View Related
Oct 8, 2012
I amprinting on an Epson Stylus Pro 4800 using Photoshop CS3. Although the printer will accommodate lengths up to 55 inches, when I try to print something longer than 30 inches, Photoshop crashes. Epson adives the purchase of RIP software. Is there a way in Photoshop to get around the length limitation?
View 1 Replies
View Related
May 10, 2012
I have a drawing completed but I cannot seem to get the page setup correctly for printing. My drawing is 1:1 and when i go to print preview the page is so much bigger than the drawing. How do I resize this and save the setting. Can I save this setting?
View 1 Replies
View Related
Jan 12, 2012
I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
View 2 Replies
View Related
May 29, 2013
In page setup i have setup my page to print 4 business cards on an A4 page. I have customize the labels myself. Then in print preview i have chosen to print the business cards in the center of the page. But the cards are on the bottom left corner and what ever i do it will not change.
maybe i have to change the margins in page setup-customize label? But don't know the inches.
How can i put my 4 business cards in the center of the page to print?
View 5 Replies
View Related
Apr 4, 2011
I was playing around with my settings and did something that is keeping me from printing. When I go to print preview, the page is blank. I have tried opening up jobs that I successfully printed before and they also show and print blank. Everything looks normal in the work area. I just can't print.
View 14 Replies
View Related
Jan 11, 2012
When printing a image in halftone from Corel x5. The image looks great in print preview but if I try printing it prints a solid black page.
View 7 Replies
View Related
Nov 26, 2013
I want to make a collage page but in landscape form.
Example 9 x 11 so that I can use it to be printed by Costco or someone else
View 1 Replies
View Related
Mar 7, 2012
My CorelMacros.CreateColorSwatch macro has stopped dumping the swatches into whatever blank Letter-sized document I have open (which is how it used to work) and instead it is creating a new document, at 4.25" wide x 7" high, and dumping the swatches into that. Using Pantone Solid Coated, but it's doing this regardless of what palette I choose.
There is no option in the Macro's dialog box to alter or even instantiate a page size, and I cannot find in the code of the macro where to set this variable.
View 5 Replies
View Related
Sep 22, 2012
When I select Landscape printing, Photoshop CS6 waitis a moment and then goes back to portrait printing. And it will not print landscape. I still have CS5.1 and it works fine.
View 2 Replies
View Related
May 24, 2012
I am using Photoshop Extended CS6 on a Mac with OS 10.7.4 and the latest driver for an Epson 7800 just downloaded from the Epson site. In the Print Settings dialogue "Page Setup" defaults to "Roll Paper - Banner" and any other selection such as sheet does not stick when saving a printing preset. Once selected, it appears to stay for one print, but returns to roll paper so that it needs to be reset with every print.
View 6 Replies
View Related
Jan 3, 2013
I am having problems printing from Photoshop CS6 to an Epson Pro 3880 in paper sizes 13x19 and 17x22. I have not had this problem several weeks ago, but it has shown up in the past week.
I worked with Epson Tech support and we were able to determine that the problem was with Photoshop which took several days working with tech support. We downloaded new drivers several times and reset the printer to factory settings. Then we tried printing and still had the same problems a small print in the lower left hand corner of these larger papers. The printer prints fine on 8.5x11 paper. We then tried printing from Lightroom 4 and it did fine. So next we uninstalled Photoshop CS6 and reinstalled and still found the exact same problem.
View 4 Replies
View Related
May 7, 2013
I have recently upgraded my Mac Pro 3.1 to Mountain Lion (10.8.3). I have Adobe CS4 Design Standard and I used to print to my Epson SP9900 (using IP connection) from Photoshop CS4 without any problems using native Epson drivers. I downloaded the most recent drivers from Epson for SP 9900 on Mac OSX 10.8 but now prints come out as shattered, garbled or offset multiple times. Only from Photoshop, as Illustrator CS4 prints fine. As are other applications, including browsers and Microsoft Office.
I removed all the drivers and printer queues, reinstalled Design Standard CS4 and newly downloaded drivers from Epson and the first print came our OK. Then the second printed the same as before - garbled and offset.Should I try CS5 (I have the installer disc and license), or would I have the same problem? Am I facing the prospect of going back to Snow Leopard (if that is possible without completely reformatting my drive), or are there configuration options not apparent during standard installation?
View 1 Replies
View Related
Aug 28, 2012
I cannot print landscape mode images to my Epson from Photoshop 5.5. None of these combinations work: Choose Landscape in both PS and Epson dialogue: results in a portrait format cropped image. Choose Landscape in either one of the two dialogues: same thing happens. Print from Lightroom to Epson: results in correct landscape format print but there is no method of printing actual size. As I print DVD covers it is essential that the printer prints actual size! I used to be able to print correctly to my KM laser printer, but they have not bothered to upgrade their drivers to Win 7, so that makes the printer worthless. I have already talked to Epson at length. They insist the fault is with CS5.5 and not with their drivers. (I have the latest Epson drivers installed.)
View 4 Replies
View Related
Jan 7, 2009
I am having a very difficult time getting color matched prints with CS4 and my R2880 Epson printer. I had no issues with CS3. I have tried every combination available to me and I get very drab almost browinsh prints. I have the latest drivers and also have upgraded to Vista, no change there at all. I am using the proper ICC profiles as well.
View 10 Replies
View Related
Oct 5, 2008
My Epson Stylus Pro 9600 has a problem with CS3 printing. When printing large images (i.e. 36x60) a portion of the image would be missing at the bottom (blank) The 10.01 update addressed this issue but it seems not completely. The problem was attributed to using a "Custom" print resolution however I still have this problem and after much testing I have narrowed it down to the "Finest Detail" check box under the custom, advanced tab. Checking this "Finest Detail" check box reproduces the problem.
View 9 Replies
View Related
Aug 29, 2012
Suddenly my LR 3 doesn't want to print to my epson pro 3880?
View 2 Replies
View Related
Jan 30, 2012
I am a PC user of Autocad LT making the transfer to Mac.Just purchased AutoCad LT for Mac 2012.While printing a file from layout in landscape, the bottom edge is missing.
If I print a file in Portrait It will center and fit to page perfectly.(Within The Dashed Lines)The layout page shows the print inside the dashed lines of the printing area as it should.
I have tried moving the layout above the dashed line, then the top that shows outside the lines won't print.I have tried every hing I can think of, without success.
View 1 Replies
View Related
May 8, 2013
In the past two days, two-page PDFs that I save out of CS6 are printing with the second page upside down. I have tried resaving the documents—didn't work. Tried saving the documents as individual PDFs and combining the PDFs in Acrobat—didn't work. I have had my colleagues print them, and the second page is upside-down too. When I print two-page PDFs that I saved last week or longer ago, I have no problem at all. It just seems to be happening with recently saved PDFs. I didn't update any software on my computer between saving the PDFs that are printing correctly and when this problem began.
View 11 Replies
View Related
Aug 28, 2013
I cannot print photogrpaic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem. The problem persists even if I try using a cabled connection rather than WiFi. I have ensured latest software from Epson has been downloaded. This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
Any workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
View 1 Replies
View Related
Dec 8, 2012
I am using Photoshop CS4 and trying to print using my Epson PX710W with my New MacBook Pro (OS X 10.8.2 - Mountain Lion) but every time I send a photograph to print it comes out blank?
I am trying to print on to Epson Premium Glossy (4x6) Paper and I have tried other types of paper and sizes but every time it is blank. I always select the correct Paper Profile in the Print Menu depending upon the paper I am using and I select the correct size and paper tray. The print will print from Photoshop if I dont select an Epson paper profile but whenever I use the Epson Profiles it wont work. I even tried reinstalling the paper profiles but nothing happened, and the print remained Blank!
The Printer works with all paper through any other programme just not Photoshop CS4!
View 3 Replies
View Related
