Illustrator :: Second Page Of Two-page PDFs Printing Upside-down?
May 8, 2013
In the past two days, two-page PDFs that I save out of CS6 are printing with the second page upside down. I have tried resaving the documents—didn't work. Tried saving the documents as individual PDFs and combining the PDFs in Acrobat—didn't work. I have had my colleagues print them, and the second page is upside-down too. When I print two-page PDFs that I saved last week or longer ago, I have no problem at all. It just seems to be happening with recently saved PDFs. I didn't update any software on my computer between saving the PDFs that are printing correctly and when this problem began.
how to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
I'm working at a screen shop, printing .ps files for film. Most of the art is provided from the client on seperate artboards of varying size. In the print dialog box I select "custom" from media size options. This sets my page size to the size of the selected artboard. The problem is each page needs to be a different size so I am forced to print each page one at a time. Is there a way for illustrator to change the media size per artboard?
I am using Xara Photo & Graphic Designer (non Pro) version 6. I have a custom page size of 10"x7.5". I have turned off the page shadow in File>Page Options>Tab[Page Size]:Section[Spread]:Checkbox[Show page shadow]. The shadow is gone from the view of the document, but when exporting to PDFs, it's back!
If I open a 4-page PDF in CorelDraw, I can edit anything in it. But if I save my changes, it saves as a 4-page cdr file. But I want to save the changes to the PDF. Is the only way to save the changes to the pdf file to re-publish the whole 4 pages to PDF again and have it replace the old one when asked? Wouldn't this further compress any jpgs?
Re-publishing the whole thing and changing the settings to no compression (and remembering to reset them back again later!) seems very inefficient......The question, of course applies to single page pdf's as well, but I'm thinking of deleting or adding a page or changing page order.
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
========================= Job: - Error(s) Did Not Plot
Job ID: 5 Sheet set name: Date and time started: 2/1/2012 10:34:53 AM Date and time completed: 2/1/2012 10:34:54 AM UserID: AchrisK Profile ID: Total sheets: 1 Sheets plotted: 0 Number of errors: 1 Number of warnings: 0
ERROR: Internal Error: Failed to get Plot Settings Dictionary. ==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
After moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
Indesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
I use to use Elements which has a nice feature to print multiple selected files in many different formats on a page. A selection button lets you print each picture only once so that you can, for example, shoot 60 images to the printer and get 20 pages with three 4x6 on a page. The Picture Package automation in Photoshop does something similar but it's a struggle to print each image only once -- you've got to manually set each page up correctly. how to do this more conveniently? Plugins, etc?
I have found loads of tutorials showing how to do this with a normal single tone page but I am having trouble getting the curl to work well on the bottom right hand corner with the texture and also the torn edge. I have tried distorting it but it just goes all blurred.
I have a drawing completed but I cannot seem to get the page setup correctly for printing. My drawing is 1:1 and when i go to print preview the page is so much bigger than the drawing. How do I resize this and save the setting. Can I save this setting?
I'm trying to find a setting which allows me to produce pdf copies of AC LT 2014 layouts that do not require rotation to view them in Adobe.
I've searched all through the pdf settings and still I have to rotate the pdf counterclockwise to view it in its correct orientation.
There's a setting which works for MS Office documents in the pdf options section but when this is applied in ACAD it doesn't work and I still have to rotate the view.
CS6, no page setup? I see no option permitting me to choose landscape or portrait view. I'm using mountain lion and a canon mp560. There's nothing under print settings. "layout direction" Is it a compatibility problem between CS6 and my printer? Is there a workaround?
I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
I create a graphic that has the dimensions of a standard piece of paper (8.5in X 11in) and then i savedit on a disc for my friend and he goes to office max to print it out and it comes out with a border... Is there a way to get rid of the border or can printers just not print full page.
I'm really struggling to get my head around "paper space" & "model space". I just made a fairly detailed drawing and printed it in landscape on an A4 sheet. That worked well. But then I changed my mind. I now want to print it in "portrait". Trouble is it needs to be resized, as it keeps missing part of my drawing off the right hand side of the paper.
I need to print double page spreads where a single image spans both pages.And to complicate things I need to print on the Moab pre-drilled paper for my portfolio.Outside of going into Photoshop and cutting the image in two and printing them out. Is there a way to do it in Lightroom?Also is there a way to keep all of the pages with their layouts and images intact for a later time when I would want to print another portfolio?
Does Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
A little + sign appears at the bottom right corner of a text cell when the text overflows. I find I cannot pick up the additional text by clicking the + sign to place it on the next text cell thus linking text from page to page. Am I missing something or is such a useful facility unavailable in Lightroom? If that's the case, is there a good reason for Lightroom not offering text linking between pages?
