I have found loads of tutorials showing how to do this with a normal single tone page but I am having trouble getting the curl to work well on the bottom right hand corner with the texture and also the torn edge. I have tried distorting it but it just goes all blurred.
View 3 RepliesI was playing around with the page curl effect and found it quite cumbersome to do it over and over again in order to make the character rip through the centre of the page. Is there any easy way to achieve this effect....or maybe an action or filter?
For instance, in the picture, I want to make bugs bunny appear to have ripped through the hole with page curls along the border of the hole.
From where can I get [ download ] "Page Curl" plug-in for Photoshop? In most of the sites it says "Shareware".
View 24 Replies View RelatedI can switch and go to another graphics program, but I would like to figure it out and use XARA X1 to accomplish it. How do you apply a curl to a page sorta like this:
View 6 Replies View RelatedThere is a texture in the texturizer(sandstone) that i would like to use as a pattern on a webpage background.
View 1 Replies View RelatedUsing Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
View 3 Replies View RelatedAfter moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedThis was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View Relatedhow to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
View 8 Replies View RelatedIndesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
Untitled-1.jpg
i often do a very big and complex mix of logos names and so on.
i´d like to know if ther is any hotkey on how to move any object or a group of objects from far on the page to the page border.
In the past two days, two-page PDFs that I save out of CS6 are printing with the second page upside down. I have tried resaving the documents—didn't work. Tried saving the documents as individual PDFs and combining the PDFs in Acrobat—didn't work. I have had my colleagues print them, and the second page is upside-down too. When I print two-page PDFs that I saved last week or longer ago, I have no problem at all. It just seems to be happening with recently saved PDFs. I didn't update any software on my computer between saving the PDFs that are printing correctly and when this problem began.
View 11 Replies View RelatedDoes Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
View 2 Replies View RelatedA little + sign appears at the bottom right corner of a text cell when the text overflows. I find I cannot pick up the additional text by clicking the + sign to place it on the next text cell thus linking text from page to page. Am I missing something or is such a useful facility unavailable in Lightroom? If that's the case, is there a good reason for Lightroom not offering text linking between pages?
View 2 Replies View RelatedI'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies View RelatedI am making a flyer for my customer, in Page Maker. They are a florist, and I have edited the images from FTD etc to their standards.
I have run into a problem though. I have traditionally put FTD's logo directly on the images while I am editing them. A request was made, that all logo's would be the same size. In order to do this, I need to have the logo as a separate image with an opaque back ground in Page Maker.
I have been unable to paste in any images (.tif) with opaque back grounds. This is probably due to the fact that our printer has us use CMYK. Yet, photoshop can handle CMYK with opaque back grounds just fine, why cant Page Maker?
When I choose the Photoshop Help I'm getting to a page on [URL]...with error 404 saying Sorry, this page is not available. What's the reason for that?
In the past it worked. Some days ago I had to reinstall AIR because it did not update.
I'm making a certificate that I want to fit the entire page when I print it. What is the width and height to accomplish this?
View 5 Replies View RelatedWe received a jpg file that seems to gave 2 pages when you view it in Bridge.
When we open the file in Photoshop or link it in Indesign or Illustrator we only see the 1st page or view of the file.
I was very surprised to see this in Bridge, as far as I know it is not possible to even make a multi page jpg file.
If I change a pdf page in Photoshop CS2, when I resave it to Acrobat 7 it comes out blurry. Is there anything I can do to fix this?
View 4 Replies View Relatedi click on the PRINT SETTINGS button and the PRINT button at bottom of window goes from blue to white but i don't get to the SETTINGS page.i can print the page, but it prints without my being able to change settings
View 2 Replies View RelatedI really don't know what you call what I need.. but.. I want to create a template that looks something like if the page is going to turn.. like for example.. you know when you are reading a book right.. and you grab the top right hand corner to switch pages? well.. that is what I want.. I need a tutorial on how to do this in Illustrator .. or photoshop...
View 2 Replies View RelatedI want to create a hard copy (printed paper) portfolio of some of the designs Ive created, but Im not sure how to print a web page. I think it can be done in PS. If the web site was created in 72 dpi RGB resolution, I'm assuming it wouldnt print well because its not a high resolution CMYK image, am I correct?
Ive already created a CD portfolio, but is there a way to print (hard copy) a nice crisp clean image of a web page to show a client/ employer.
studying architecture and we tend to work on standard a1 portrait format sheets. Usually I just draw straight to pages etc but our new project is very conceptual type work and I wanted to try and incorporate some photoshop work into my pages rather than just plain drawings as usual.
how do I set up an A1 portrait format sheet in photoshop cs2? Is it just a case of finding the page measurements and starting a new document of those dimensions in centimetres? Or is there an option to this somewhere that I'm missing?
Also when it comes to printing.... I think I know of somewhere that I can take it to on a cd/usb drive and they will print it, but just in case that falls through, I've seen others split it into A3 size sheets and paste them together after... once you've created an A1 sheet is there a easy way to do this?
I am playing around with a new (to me at least) PS plug-in called SiteGrinder. It's a web site building prgm. that helps novices like me design and build web pages via a PS plug-in.
I wanted to create the pinstripe look in the background of Adobe Lightroom.
How do I get that look?