InDesign :: Moving A Page In Document The Master Page Elements No Longer Display On Screen Or In Print
Mar 14, 2014
After moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
Indesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
We're running InDesign CS6 (version 8.0.1) in my office. When we override and delete a master page item from a page then save out the PDF, the deleted item still shows up in the PDF.
Example: We typeset a string of 250 trading cards. Each card is a separate page, in a single InDesign document, and are all based on one of several possible master pages. On the master page for a given card there are some graphic elements like symbols and directional arrows. During typesetting on a card that uses that specific master page we find one of the pointing arrows needs to be oriented in a different direction. We override the existing arrow and delete it, then replace it with the correct arrow (the arrows are placed graphics). The old arrow is no longer visible in the InDesign file. When it comes time to export the file for the printer we run a script that exports each page as a separate PDF. When we proof the PDFs, the card with the arrow adjustment still shows the deleted arrow, it is visible beneath the new arrow. If we save out that page by itself (with the script or manually), this problem doesn't occur. It only happens when we save out the entire set of cards at once or as a single, multi-page PDF. Though we typically use a script for the export, we still get the same result if we don't use the script.
I have created a new master with a header, footer and main content region. The main content needs to be editable for each page I add to the document but I can't for the life of me figure out how to do it! Has this changed since the first Indesign CS?
So the header and footer will remain the same throughout the document - if I change that in the master it will then change throughout. The text region will also remain the same throughout but I should be able to add content to that region on each page I create in my document. At the moment I can't. It won't let me select that region I've created on any of the pages in my document.
Before I flame off on this crap CC version of ID: Why isn't my art centered when I resize my document? I have the center box selected at the upper left as I always do but as soon as I change the page size, the orientation is top left and all the art is hanging to the right and below my new page size. I'm not doing photo retouching. I can't read any of my menus.
I have been trying to create a PDF of a 36 page document. However, when I get to page 6 I get a message 'downloading font' and then the programme hangs and I have to use windows task master to close it down. There are only three fonts being used on the page and according to Font Finder no fonts are missing. This is driving me crazy and I'm fast approaching my printers deadline.
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
In both my Indesign and Illustrator (CS6), I can set up the document as tabloid size but when I try to print there is no Tabloid or custom size available under paper size of print setup and it will only print smaller. I need to print a page that is 8.5X14 as 11X17 with marks and bleeds. Urgent (for work).
Dialog box:"The active document uses multiple page sizes Print Booklet works only with documents that use a consistent page size."OK, but the page sizes are all the same.
When I try to set a large page size (13X19) in the print screen from GIMP, it will not go beyond 8 X 11. What do I have to do to set up to print larger. When I do page set up, it always reverts to defaults.
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
how do you override master pages for the entire document, not just page-by-page? I have a multi-page document and want to ba able to edit type of all pages but the text areas are locked.
On the master page "grid" is not visible, cannot edit or print. Whenever I try to draw an object this message appears, Operation cannot be completed. The active layer "Grid" is locked or invisible"
Cannot do anything but turn grid visiblity on and off.
I recently updated from Photoshop Elements 7 to Photoshop Elements 10 and now I cannot print TWO 5x7 photo's on the same page, letter size photo paper! I have tried everything!
I have a series of photos taken from the exact same location but on different days. I would like to display them on one page but use a slide tool/bar to move or transition between the photos. If the slide bar can display the date of the photo then that would be great.
Ideally I'd like to include this single page in a pdf document. Is this possible?
My pse9 organizer screen shifted a half page left and I can not seem to get it back. The computer has windows 7. I restarted the computer. I removed pse9 and reinstalled it. The editor screen works ok.
i want lock all object on all pages. so i make a code but i wnt to run this code except master page (desktop)
my code is ............
Sub LockAll() Dim p As Page Dim s As Shape Dim i As Integer, j As Integer j = 1 For Each p In ActiveDocument.Pages p.Activate For i = 1 To ActivePage.Shapes.Count ActivePage.Shapes(i).CreateSelection If ActiveLayer.Printable = False Then ActiveSelection.Locked = True j = j + 1 Next i Next pEnd Sub
Objects on a Master Page layer appear to be in front of all other layers on individual pages. I have a master layer with standard page background graphics, but on each individual page, I want a graphic on top of this background.
Is there a way to send this layer to be in back of all other layers and still be a Master layer? The only solution I see is copying this background across 20 pages, which doesn't seem right. Or change my design around the background, which I'd rather not do.
I just got Elements 11 and it's not going well. The most severe bug is that if I click on Page Setup..., the print dialog becomes non-functional. Page Setup... and Print... buttons no longer do anything when clicked. The problem persists until I quit and relaunch Elements. Sometimes I can work around this by configuring everything in the Print window alone, but this prevents setting Elements options for custom paper sizes. I've already tried resetting Elements' preferences. All other apps, including the older version of Elements I had, print without problem.
I want to be able to create guidelines in CorelDraw X4 that show up on every page in my CorelDraw document, but without having to open the Object Manager and highlight the Master Page before I create them.
At the moment when I open a new document and create guidelines they only show up on the first page and although it isn't difficult, it's annoying to have to move them manually on to the Master Page, how I can change the CorelDraw settings permanently so that whenever I open a new document and create guidelines they are created on the Master Page?
Having solved my problem of printing multiple copies, I now canot print at all. Page setup and print command are grayed out. Printer works in light room and pages. OS xLion epson R3000 Elements 11 Trial version.
Using Elements Ver. 7. I have one photo which I have cropped using a 4x6 aspect ratio. I've done the same thing on dozens of photos but this one only prints on half the page (4x6 photo paper) no matter what orientations I set the printer or the program to.