On the master page "grid" is not visible, cannot edit or print. Whenever I try to draw an object this message appears, Operation cannot be completed. The active layer "Grid" is locked or invisible"
Cannot do anything but turn grid visiblity on and off.
i want lock all object on all pages. so i make a code but i wnt to run this code except master page (desktop)
my code is ............
Sub LockAll() Dim p As Page Dim s As Shape Dim i As Integer, j As Integer j = 1 For Each p In ActiveDocument.Pages p.Activate For i = 1 To ActivePage.Shapes.Count ActivePage.Shapes(i).CreateSelection If ActiveLayer.Printable = False Then ActiveSelection.Locked = True j = j + 1 Next i Next pEnd Sub
Objects on a Master Page layer appear to be in front of all other layers on individual pages. I have a master layer with standard page background graphics, but on each individual page, I want a graphic on top of this background.
Is there a way to send this layer to be in back of all other layers and still be a Master layer? The only solution I see is copying this background across 20 pages, which doesn't seem right. Or change my design around the background, which I'd rather not do.
how to hide a master item from a particular page in corel draw x4.
View 12 Replies View RelatedI want to be able to create guidelines in CorelDraw X4 that show up on every page in my CorelDraw document, but without having to open the Object Manager and highlight the Master Page before I create them.
At the moment when I open a new document and create guidelines they only show up on the first page and although it isn't difficult, it's annoying to have to move them manually on to the Master Page, how I can change the CorelDraw settings permanently so that whenever I open a new document and create guidelines they are created on the Master Page?
I wonder if there's any way to make a page without the layout of the master page layer? I have made a frame, page number and small stuff that will go on every pages. But I want to make first and last page of the document a little different so I want that the master layer will be ignored for these pages.
View 1 Replies View RelatedI am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
We can make multi master pages for ODD and EVEN pages.
View 1 Replies View RelatedI am new to CorelDraw and I have got an issue which might be potentially linked with master page / dynamic text or macros. I have got a multipage template with some text repetition on each page. Unfortunately those text have to be in different position and using different fonts.So setting up master page is not really solution, unless it can be done as above.
View 2 Replies View RelatedAfter moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedIndesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
When importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
We're running InDesign CS6 (version 8.0.1) in my office. When we override and delete a master page item from a page then save out the PDF, the deleted item still shows up in the PDF.
Example: We typeset a string of 250 trading cards. Each card is a separate page, in a single InDesign document, and are all based on one of several possible master pages. On the master page for a given card there are some graphic elements like symbols and directional arrows. During typesetting on a card that uses that specific master page we find one of the pointing arrows needs to be oriented in a different direction. We override the existing arrow and delete it, then replace it with the correct arrow (the arrows are placed graphics). The old arrow is no longer visible in the InDesign file. When it comes time to export the file for the printer we run a script that exports each page as a separate PDF. When we proof the PDFs, the card with the arrow adjustment still shows the deleted arrow, it is visible beneath the new arrow. If we save out that page by itself (with the script or manually), this problem doesn't occur. It only happens when we save out the entire set of cards at once or as a single, multi-page PDF. Though we typically use a script for the export, we still get the same result if we don't use the script.
I have created a new master with a header, footer and main content region. The main content needs to be editable for each page I add to the document but I can't for the life of me figure out how to do it! Has this changed since the first Indesign CS?
So the header and footer will remain the same throughout the document - if I change that in the master it will then change throughout. The text region will also remain the same throughout but I should be able to add content to that region on each page I create in my document. At the moment I can't. It won't let me select that region I've created on any of the pages in my document.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I set up a new page thus (I live in a country which uses metric units, so ...):
Drawing Units Setting18-07-2013 9-24-06 AM.jpg
Then:
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0.00,0.00
Specify upper right corner <3.5000,2.7000>: 3.65,2.74
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 1000,1000
Specify radius of circle or [Diameter]: 250
Command:
and I get:
Range Problem 18-07-2013 9-36-57 AM.jpg
The circle was centred at x=1000 metres, y=1000 metres, yet it displays right down at the bottom left of my screen. Compare the radius of the circle to the distance from the centre to the origin - it's nothing like 1:4! Look at the coordinates for the cursor!
Zooming in and zooming out has no effect on the huge dimensions indicated by the coordinates.
I know this must be simple because it is not mentioned in any textbook or tutorial I have been able to find. Authors don't seem to think it is important, but it's driving me nuts! The question is this:
How do I set the page size and grid scale to something sane?
I am pretty sure that this scale problem is at the root of many of the other problems I am having. A14 is doing it's job faithfully but the display is so small that I cannot see what is happening !
Untitled-1.jpg
i often do a very big and complex mix of logos names and so on.
i´d like to know if ther is any hotkey on how to move any object or a group of objects from far on the page to the page border.
Been working in X3 - moved to X6. How do you create NON-MASTER repeating layers that automatically show up on all pages, like in X3, that can contain independently modified items, not master items.
View 3 Replies View RelatedI want create an object. A 0.5 inch hole for instance. I want to place this object into a drawing or mutiples of this object in my drawing. Two things i would like to do. If i decide i want to change the hole to 0.25 inches i want to change one instance of the object and all instances to change automatically. Second is that if i scale the drawing up in size I would like all the 0.5 inch hole to remain at 0.5 inches.
View 8 Replies View RelatedIt seems to me in X3 I could create a master layer and put it infront or behind all other layers. Now it seems that I can't do that.
How to make a master layer in x5 and move it behind all other layers in all pages at once?
If your answer includes going to the object manager and moving it on all the pages, don't bother. I'm not doing it for 400 pages.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
Im working on 4 pages and i want to keep the page sizes different on all 4 of them but whenever i change the pages size on 1 page then all the other pages also follow the 1st page.
i went to object manager but i don't know what i should do to stop it.
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies View RelatedI'm working on a book that has watermark on all pages and jpegs too of a4 size. Working in earlier version [x5], I used to overlap all the watermarks which was located in master layer. When I used to import a fresh jpeg on new pages, the watermark went below the jpegs. What i used to do was create a new master layer and then cut pasted the watermark in that layer, and the watermark came above the jpegs in the pages that were added later. In CorelDRAW x6 this i'm not able to do.
The watermark remains bottom of the jpeg, no matter what i do. if i edit the same file in version X5, it works fine and then i get it into x6 and do rest of stuff it works fine. The watermark problem still exists.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
How to get a background, the same on every page of a booklet, with bleed for printing? Using Page Layout/Background will only size to the page, no bleed. There must be a way to have a Master Layer as a static background (with bleed) but when I try it always sits on top of every page & I cannot bring the page text to the front.
View 15 Replies View RelatedX4 user here that upgraded to X6 a few weeks ago. One thing that's blowing my gord is having my dimensions "lock" to guidelines and/or objects -- My dimensions aren't locked in the classic sense, i understand how to lock a dimension in corel. What i mean every time i create a dimension with master guides, and then try to move my guides, my dimension moves with it.
The worst of it is that i'm mostly getting them linked to master guidelines, so when i create a new page, say page 2, and want to move a master guide, i go back to page 1, and it has messed up all my dimensions.
And no, i do not want to break my dimension apart, I need it to stay as a working dimension!
Is there any way I can choose some Master layers to be present on selective pages only? For example in a 50 page document I have a master layer having a square and a rectangle. Now this should be available on pages say 1-10, 11-23. The rest of the pages should not have them.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
What is the fastest way to take a directory of individual corel files
page1.cdr
page2.cdr
page3.cdr
...
page 50.cdr
page 51.cdr
page52.cdr
and combine them into one single 52 page coreldraw file for printing/imposition.
Color Printing Forum : Print Directory
Any way to turn an object that has been used as a master (parent object) or its resulting clone back into a normal object?
View 10 Replies View RelatedI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.