Been working in X3 - moved to X6. How do you create NON-MASTER repeating layers that automatically show up on all pages, like in X3, that can contain independently modified items, not master items.
View 3 RepliesIt seems to me in X3 I could create a master layer and put it infront or behind all other layers. Now it seems that I can't do that.
How to make a master layer in x5 and move it behind all other layers in all pages at once?
If your answer includes going to the object manager and moving it on all the pages, don't bother. I'm not doing it for 400 pages.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
Objects on a Master Page layer appear to be in front of all other layers on individual pages. I have a master layer with standard page background graphics, but on each individual page, I want a graphic on top of this background.
Is there a way to send this layer to be in back of all other layers and still be a Master layer? The only solution I see is copying this background across 20 pages, which doesn't seem right. Or change my design around the background, which I'd rather not do.
I'm working on a book that has watermark on all pages and jpegs too of a4 size. Working in earlier version [x5], I used to overlap all the watermarks which was located in master layer. When I used to import a fresh jpeg on new pages, the watermark went below the jpegs. What i used to do was create a new master layer and then cut pasted the watermark in that layer, and the watermark came above the jpegs in the pages that were added later. In CorelDRAW x6 this i'm not able to do.
The watermark remains bottom of the jpeg, no matter what i do. if i edit the same file in version X5, it works fine and then i get it into x6 and do rest of stuff it works fine. The watermark problem still exists.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
Is there any way I can choose some Master layers to be present on selective pages only? For example in a 50 page document I have a master layer having a square and a rectangle. Now this should be available on pages say 1-10, 11-23. The rest of the pages should not have them.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I want create an object. A 0.5 inch hole for instance. I want to place this object into a drawing or mutiples of this object in my drawing. Two things i would like to do. If i decide i want to change the hole to 0.25 inches i want to change one instance of the object and all instances to change automatically. Second is that if i scale the drawing up in size I would like all the 0.5 inch hole to remain at 0.5 inches.
View 8 Replies View RelatedI am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the “Machines” layer in the master and it hides the “Machines” layer in all the X-ref.
Side Note: If you were going to make the suggestion “use Xbind” I’ve tried it and it doesn’t work well because “Xbind” creates a new layer you have to assign to things instead of making the layers relate to one another.
I have finished my works using only one layer( a bad habit I know) and now I need to export them as PSD, and as You know it needs Layers so it can be editable on Photoshop.
I know the fact that I should import all the objects in single Layers, ie creating thousands of Layers for all the work, new layer for each object I import.
But is there any option for easy extraction of objects into single layers, one click option or much easier than going individually through each of them?
If not available, this type of option would work for CorelDRAW or any vector program, be really more effective and stay in touch with the requirements of the industry, especially when it comes, on creating vectors for web or apps.
Is there a way to create a "master" numbering style (say, a number in a filled circle) to annotate an image of something else? I know there are technical drawing suites that do this, but was hoping that there was a way in illustrator (or indesign) Attached image shows the result im going for (yes I know I can do this manually, looking for an optimized way of doing it).
View 1 Replies View RelatedI am quite new to cad and need to create a sample dwg from my master drawing to send off. How to do this?
View 8 Replies View RelatedCan I create a master folder in elements organizer and move other folders into the master folder? For example, a master folder named "trees" and move existing folders named "Apple" "Pear" "Pine" that have information and pictures of that particular tree.
View 6 Replies View RelatedOn the master page "grid" is not visible, cannot edit or print. Whenever I try to draw an object this message appears, Operation cannot be completed. The active layer "Grid" is locked or invisible"
Cannot do anything but turn grid visiblity on and off.
i want lock all object on all pages. so i make a code but i wnt to run this code except master page (desktop)
my code is ............
Sub LockAll() Dim p As Page Dim s As Shape Dim i As Integer, j As Integer j = 1 For Each p In ActiveDocument.Pages p.Activate For i = 1 To ActivePage.Shapes.Count ActivePage.Shapes(i).CreateSelection If ActiveLayer.Printable = False Then ActiveSelection.Locked = True j = j + 1 Next i Next pEnd Sub
how to hide a master item from a particular page in corel draw x4.
View 12 Replies View RelatedI want to be able to create guidelines in CorelDraw X4 that show up on every page in my CorelDraw document, but without having to open the Object Manager and highlight the Master Page before I create them.
At the moment when I open a new document and create guidelines they only show up on the first page and although it isn't difficult, it's annoying to have to move them manually on to the Master Page, how I can change the CorelDraw settings permanently so that whenever I open a new document and create guidelines they are created on the Master Page?
Im working on 4 pages and i want to keep the page sizes different on all 4 of them but whenever i change the pages size on 1 page then all the other pages also follow the 1st page.
i went to object manager but i don't know what i should do to stop it.
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies View RelatedHow to get a background, the same on every page of a booklet, with bleed for printing? Using Page Layout/Background will only size to the page, no bleed. There must be a way to have a Master Layer as a static background (with bleed) but when I try it always sits on top of every page & I cannot bring the page text to the front.
View 15 Replies View RelatedI wonder if there's any way to make a page without the layout of the master page layer? I have made a frame, page number and small stuff that will go on every pages. But I want to make first and last page of the document a little different so I want that the master layer will be ignored for these pages.
View 1 Replies View RelatedX4 user here that upgraded to X6 a few weeks ago. One thing that's blowing my gord is having my dimensions "lock" to guidelines and/or objects -- My dimensions aren't locked in the classic sense, i understand how to lock a dimension in corel. What i mean every time i create a dimension with master guides, and then try to move my guides, my dimension moves with it.
The worst of it is that i'm mostly getting them linked to master guidelines, so when i create a new page, say page 2, and want to move a master guide, i go back to page 1, and it has messed up all my dimensions.
And no, i do not want to break my dimension apart, I need it to stay as a working dimension!
I am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
We can make multi master pages for ODD and EVEN pages.
View 1 Replies View RelatedWhat is the fastest way to take a directory of individual corel files
page1.cdr
page2.cdr
page3.cdr
...
page 50.cdr
page 51.cdr
page52.cdr
and combine them into one single 52 page coreldraw file for printing/imposition.
Color Printing Forum : Print Directory
I am new to CorelDraw and I have got an issue which might be potentially linked with master page / dynamic text or macros. I have got a multipage template with some text repetition on each page. Unfortunately those text have to be in different position and using different fonts.So setting up master page is not really solution, unless it can be done as above.
View 2 Replies View RelatedAny way to turn an object that has been used as a master (parent object) or its resulting clone back into a normal object?
View 10 Replies View RelatedI am looking for a way to create a master list of construction notes then use blocks attributes with fields to link to that master list. That way if the master list changed the note bubbles would change as well.
Sheet sets are being used with this project but I can't think of a way to make it work with the existing sheet set technology.
We use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
A link or a brief explanation of"when & why" and "how to use" a master layer when working with a multi - layered image (psd or psb) file in CS6.
I've seen a couple of tutorials that make use of a "master layer" but I don't understand the "when & why.
Why in the heck do Macs show layers in a PDF that are HIDDEN at the time of saving if "Create Acrobat Layers from Top-Level Layers" is checked is checked -BUT- PC's don't??
I just proofed a business card with my boss accidentily showing him some type on a layer that was hidden. He approved it. Now I have to make a bunch of type set up in very tight margins work in production.
I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.