Having solved my problem of printing multiple copies, I now canot print at all. Page setup and print command are grayed out. Printer works in light room and pages. OS xLion epson R3000 Elements 11 Trial version.
View 1 Replies
I just got Elements 11 and it's not going well. The most severe bug is that if I click on Page Setup..., the print dialog becomes non-functional. Page Setup... and Print... buttons no longer do anything when clicked. The problem persists until I quit and relaunch Elements. Sometimes I can work around this by configuring everything in the Print window alone, but this prevents setting Elements options for custom paper sizes. I've already tried resetting Elements' preferences. All other apps, including the older version of Elements I had, print without problem.
MacOS 10.6.8
Adobe Editor 11.0
Brother HL-2170W 4.5.0
Canon PRO-100 10.66.0.0
Console:
Craploads of __NSAutoreleaseNoPool leak warnings
*** Assertion failure in -[PSCocoaMenu itemAtIndex:], /SourceCache/AppKit/AppKit-1038.36/Menus.subproj/NSMenu.m:779
When trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies View RelatedBasically I have some business cards Im trying to print on a 8.5 x 11 sheet of paper. There are cutouts in the middle of the page for the cards so im trying to print them exactly inside the cutouts. I measured the sheet myself and I need a 12.70mm offset from the top and bottom of the sheet and a 19.05mm from the 2 sides to get my cards centered in unison with the page cutout. How do you set this up in photoshop? I have CS4 for Mac.
View 2 Replies View Relatedhave large format printer. I'm trying to set up a configuration for printing on rolls and not on sheets in page set up. But even if i try to make a new one the size doesn't work (61cm - 30,5m).
View 1 Replies View RelatedI am working in Photoshop CS3 Extended and I suddenly do not have access to the print command (or to page setup, or print one copy). These three commands are grayed out while the rest of the File drop down menu is active. No trouble printing in other apps.
View 29 Replies View RelatedWhen attempting to press "page setup" in the print dialog window in cs3, the printer preferences dialog box disappears along with the print dialog window, and every time i bring the preference window back, as soon as i press any button in the window or click on any part of the window it disappears again. Why is this, and how can i stop this. My printer is an Epson 2200, my computer is a 64bit Vista.
View 1 Replies View RelatedWhen I attempt to access "page setup" the button just changes color to blue as I click it. I cannot select the media. The printer works fine from Preview but not from CS5. Epson says it's a Photoshop problem.
View 6 Replies View RelatedI have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
Okay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.
The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.
If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?
I used to use a really nice VBA routine for assigning a page setup to multiple layouts, but now I need something that will work for 2011 and up.
View 1 Replies View RelatedI get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?
View 5 Replies View RelatedI use Sheet Set Manager to create and output sheets. Typically I will setup the pages to 24x36 and set to output to our HP.
If I want to output to 11x17 pdf, I use a page setup override and it works fine.
What I would like to be able to do is add a watermark -- using transparent text -- that says "Not to Scale" across the print when I use the page setup override.
I have a set of Lightroom Print templates that I am trying to use, that are all for a 4x6 print. I can't get it to work because my page setup in the print module defaults to letter size. When I go in and change the page setup, it messes up the template and it gets all jumbled. Then when I go on to the next template, it switches back to letter size again. I want to create and hold a 4x6 canvas so these templates can either be saved to a 4x6 .jpg or printed on 4x6 paper. I know I can save a printer and page layout as part of a template by clicking the "update settings" once I have it all as i want it, but I can't even get that far because it messes up the template as soon as I change the page settings to 4x6. How do I get the canvas to 4x6 on templates that are already created so I can save them as a 4x6 .jpg or print to 4x6 paper?
I even just installed a printer that only prints 4x6 to see, but again, when I change the page layout it completely messes up the template.
I can't save photos for web anymore, there is some problem with plug-in. Could't find the plug-in entry point. What can I do?
View 20 Replies View RelatedI am trying to save a watermark as a brush but when I go to edit, define brush is greyed out.
View 1 Replies View RelatedEvery time I wish to print a docu and I press the print command
I get the specific Page numbers to be printed instead of current document or selection for e.g. If there are three pages in the document and I press Print it takes the page no. 5-6 by default even though I have only three pages in the document & I do not see anything in the preview pane
so I have to manually select the current document or the selection option to print
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedAfter moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedUsing Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedI recently updated from Photoshop Elements 7 to Photoshop Elements 10 and now I cannot print TWO 5x7 photo's on the same page, letter size photo paper! I have tried everything!
View 3 Replies View RelatedHow do I print multiple photos onone page
View 1 Replies View Relatedhow can i print the same picture multible times on one page
View 1 Replies View RelatedUsing Elements Ver. 7. I have one photo which I have cropped using a 4x6 aspect ratio. I've done the same thing on dozens of photos but this one only prints on half the page (4x6 photo paper) no matter what orientations I set the printer or the program to.
View 1 Replies View RelatedI'm trying to print two 4x6" photos on each page of a picture package, but I can't get it to print out the captions. I've successfully done it before, but can't now. The "more options" menu doesn't provide for "printing choices" and "show captions" for picture package, and I'm not sure how else to do two pictures per page. Is there another way to get the captions to print out when printing two per page? The captions print when I print individual photos.
View 2 Replies View RelatedI have always been able to print (FIT TO PAGE) 8.5 X 11 (LETTER SIZE) PHOTOS in PREVIOUS VERSIONS OF PHOTOSHOP ELEMENTS! I recently downloaded version 10 and it will not print full page photos. How to achieve printing full size page photos with no white borders around the photo in version 10!
View 1 Replies View RelatedThe page setup in my copy of Photoshop CS2 defaults to Letter. How can I change this to A4?
View 6 Replies View RelatedI am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around.
View 2 Replies View Related
