Photoshop :: Page Setup In CS2
Oct 28, 2006The page setup in my copy of Photoshop CS2 defaults to Letter. How can I change this to A4?
View 6 Replies
ADVERTISEMENT
AutoCad :: Remove Model Page Setup Entry From List Of Page Setups
Feb 1, 2012Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
InDesign :: Setup Datamerge File To Create Multi Page Spread Documents With Fields On Different Page
Apr 1, 2014Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
AutoCAD 2013 :: Change Page Setup For More Than 1 Page At A Time?
May 6, 2013I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedPhotoshop :: CS4 Print Page Setup
Jul 19, 2012Basically I have some business cards Im trying to print on a 8.5 x 11 sheet of paper. There are cutouts in the middle of the page for the cards so im trying to print them exactly inside the cutouts. I measured the sheet myself and I need a 12.70mm offset from the top and bottom of the sheet and a 19.05mm from the 2 sides to get my cards centered in unison with the page cutout. How do you set this up in photoshop? I have CS4 for Mac.
View 2 Replies View RelatedPhotoshop :: Print Page Setup
Feb 10, 2009have large format printer. I'm trying to set up a configuration for printing on rolls and not on sheets in page set up. But even if i try to make a new one the size doesn't work (61cm - 30,5m).
View 1 Replies View RelatedPhotoshop :: CS3, Disappearing Page Setup In Print
Apr 13, 2008When attempting to press "page setup" in the print dialog window in cs3, the printer preferences dialog box disappears along with the print dialog window, and every time i bring the preference window back, as soon as i press any button in the window or click on any part of the window it disappears again. Why is this, and how can i stop this. My printer is an Epson 2200, my computer is a 64bit Vista.
View 1 Replies View RelatedPhotoshop Elements :: 11 - Print Disabled After Page Setup
May 4, 2013I just got Elements 11 and it's not going well. The most severe bug is that if I click on Page Setup..., the print dialog becomes non-functional. Page Setup... and Print... buttons no longer do anything when clicked. The problem persists until I quit and relaunch Elements. Sometimes I can work around this by configuring everything in the Print window alone, but this prevents setting Elements options for custom paper sizes. I've already tried resetting Elements' preferences. All other apps, including the older version of Elements I had, print without problem.
MacOS 10.6.8
Adobe Editor 11.0
Brother HL-2170W 4.5.0
Canon PRO-100 10.66.0.0
Console:
Craploads of __NSAutoreleaseNoPool leak warnings
*** Assertion failure in -[PSCocoaMenu itemAtIndex:], /SourceCache/AppKit/AppKit-1038.36/Menus.subproj/NSMenu.m:779
Photoshop :: Page Setup Tabloid Paper Size Missing
May 1, 2012I’m using Photoshop CS 8.0 not the newer versions of CS2-5, in my previous versions of Photoshop before CS I was able to print Tabloid paper sizes, and in the new CS under page setup tabled is no longer in there. I am running windows 7 64-bit, the printer is a Xerox Work center 7345 with updated drivers. the printer sees and recognizes the paper size under the control panel printer driver preferences. but Photoshop CS will not see that size available.
View 3 Replies View RelatedPhotoshop Elements :: Page Setup And Print Command Are Grayed Out
Jan 31, 2013Having solved my problem of printing multiple copies, I now canot print at all. Page setup and print command are grayed out. Printer works in light room and pages. OS xLion epson R3000 Elements 11 Trial version.
View 1 Replies View RelatedAutoCAD .NET :: Add New Page Setup
Jun 9, 2011How do I add a new Pagesetup in VB.NET?I know I need the Plot.Settings class and I add it to the Drawing database. How to get started with the code and/or correct object?
View 3 Replies View RelatedPhotoshop :: CS5 Attempting To Print On Epson Artisan 837 - Cannot Access Page Setup
Sep 17, 2012When I attempt to access "page setup" the button just changes color to blue as I click it. I cannot select the media. The printer works fine from Preview but not from CS5. Epson says it's a Photoshop problem.
View 6 Replies View RelatedPhotoshop :: Bugs / Printing Page Setup And Floating Window Snapping At Top?
Jun 18, 20121st Bug:Iam using a HP Z6100PS 60in plotter and when Iam using page setup to print something, it keeps using the default print size... For exemple :
Printer default print size : 24x60
I want to print a 80x60 but Photoshop send a 24x60 to the printer... even if I entered 80x60... And the bug is for any sizes...
2nd bug:My Windows 7 64bits Taskbar is at the top of my screen. All the documents iam opening in Photoshop are snapping to the top of the screen... super annoying. But when I place the Win Taskbar at the bottom of the screen, no more bug...
CorelDRAW X5 :: Printing And Page Setup
May 10, 2012I have a drawing completed but I cannot seem to get the page setup correctly for printing. My drawing is 1:1 and when i go to print preview the page is so much bigger than the drawing. How do I resize this and save the setting. Can I save this setting?
View 1 Replies View RelatedAutoCAD .NET :: Set Page Setup Current?
Feb 25, 2013I have existing .NET code that adds page setups to drawings. I now wanted to set the newly added page setup as "current" within the drawing.
The "manual" way to do what I am asking is by clicking the "Set Current" button from within the Page Setup Manager dialog. How would I do this programmatically?
AutoCAD LT :: Remove Page Setup?
Aug 22, 2013I found an old 2008 post about "removing page setup from several hundred drawings all at the same time?" and the answer was "No".
But is there a way to do it in a single dwg ?
I'd like to make a button with a script behind to delete all existing page setup... in 2013LT
AutoCAD LT :: PDF Printing Page Setup
Dec 18, 2013I'm trying to find a setting which allows me to produce pdf copies of AC LT 2014 layouts that do not require rotation to view them in Adobe.
I've searched all through the pdf settings and still I have to rotate the pdf counterclockwise to view it in its correct orientation.
There's a setting which works for MS Office documents in the pdf options section but when this is applied in ACAD it doesn't work and I still have to rotate the view.
AutoCAD LT :: New Page Setup Will Not Save
Dec 17, 2013I am trying, in vane, to batch plot multiple dwg files to pdf's.
I have a pdf reader/writer (Bluebeam Extreme), but the plugin will not work (I have sent an email to Bluebeam to see if hey can sort it out).
So, I tried using the batchplot, but kept getting stuck when I had added multiple dwg's, using Publish, and then tried to change the page setup by right-clicking the files. The new page setup I had just created wass not available, apart from the dwg I created it in.
I hadn't notcied until now, as I usually use the Previous Plot dropdown when plotting, but whenever I create a new Page Setup, it is no longer in the dropdown combo box whenever I open up a new file, or even in the file I created it in if I close it down and reopen.
I am using AutoCAD LT 2010 with Windows 7 Professional, 32 Bit.
GIMP :: Cannot Find Page Setup In 2.8
May 13, 2012I cannot find the page setup in the menus of 2.8. For some reason, despite my image being landscape, I cannot change the print orientation to landscape.
In earlier versions, Page Setup was under the File tab, but, for the life of me, I can't find it anymore.
AutoCAD 2010 :: Page Setup Not Selectable?
Oct 5, 2012Not sure what causes a page setup already created and previously used to not be able to be selected at a later time. When selecting it, it reverts back to <none>. Does this mean the plotter changed/is not available? The network name for the plotter did not change, but the model of the plotter changed slightly. I have the same setup saved in 100's of drawings and assumed that as long as the network name for the plotter remained the same, the setup would continue to work.
View 2 Replies View RelatedAutoCAD 2013 :: Transfer Page Setup From One PC To Another
Jul 18, 2012I just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
AutoCAD 2010 :: Page Setup For All New DWG Files?
Mar 18, 2012How to fix the “page setup” for all "new" dwg files?
I couldn’t know how we could customize the default plot dialogue settings that the AutoCAD provides as we click the “Plot” command.
For example, each time I start with a new dwg file and click “plot” then I got some default settings.
Then how the settings of the “plot” command can be customized such that as we start with a new dwg file then the customized settings appear?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2013 :: Page Setup For Different Printers?
May 1, 2013My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
View 8 Replies View RelatedAutoCad :: How To Mass Import New Page Setup
Nov 4, 2011we recently changed the printer we use for 11x17 drawings. Is there a quick way to mass import the new page setup? Or something else quicker and easier than going into each drawing and importing the new page setup one at a time?
View 1 Replies View RelatedAutoCAD 2013 :: Page Setup And Layout
Mar 3, 2013I have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
AutoCad :: Plot Scale In Page Setup
Jun 27, 2011I'm trying to plot a set of drawings that need to be set at 1:1. Every time I pick Custom or 1:1 and set it to 1mm = 1unit, AutoCAD immediately switches it to whatever 1:1_6 is, leaving me with a bunch of empty space around all my viewports.
I'm fairly new at using paper space, and I've never used a plot scale that have underscores in them, so I don't even know what they're representing.
GIMP :: Page Setup Doesn't Appear To Accept Changes
Apr 15, 2013I am trying to print in landscape on a 5x7. In Image I change print size to 5x7 with no problem. In Page Setup I change from A4 to 5x7, select landscape and click OK. I double check and its restored all settings back to A4. If I print I get half my image in portrait.
The page setup does not appear to accept my changes, why?
AutoCad :: Setting Up 2 Page Setup For 1 Drawing?
Nov 9, 2012I want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
View 3 Replies View RelatedAutoCAD 2013 :: Crash When Creating New Page Setup?
Jan 11, 2013getting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
AutoCAD Print / Plot :: Different Output With Same Page Setup
Jul 11, 2013I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
AutoCAD 2010 :: Page Setup Layout 09 To 2012?
May 2, 2012We have just upgraded from 2009 to 2012. Also have merged with a New company that did use xrefernces for there title blocks and we did, and now i am trying to solve how to use there borders to create new page layouts.
Our page setups that we had in 2009 were created by a former employee that is longer with the company.
How we typically started a border/ sheet. We have a separate drawing file that has in model space a 24x36 border with our info that we want repeated on all our sheets.
Now that we are in 2012; The layout tap is a weird size and the 'layout black area' does not match when I import that 24x36 boarder file. The black area does not line up with "0,0,0" and that is what I and trying to figure out how to i make the black area of the layout start at 0,0,0 and be 24x36.
the picture i attached shows 0,0,0 and the 2 borders over layed.
the green box is 24x36.
the blue box is the new border which is ment to be sent within the 24x36 and the brownish red box is the old border and layout and what we used to use.