I cannot find the page setup in the menus of 2.8. For some reason, despite my image being landscape, I cannot change the print orientation to landscape.
In earlier versions, Page Setup was under the File tab, but, for the life of me, I can't find it anymore.
I am trying to print in landscape on a 5x7. In Image I change print size to 5x7 with no problem. In Page Setup I change from A4 to 5x7, select landscape and click OK. I double check and its restored all settings back to A4. If I print I get half my image in portrait.
The page setup does not appear to accept my changes, why?
Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I edited a picture that involved a layer, it asked me to save it as a jpeg picture which I did. Now I cannot find the picture I edited or the original picture. It comes up as a white page. What did I do wrong and what can be done to revert it.
View 1 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedHow do I add a new Pagesetup in VB.NET?I know I need the Plot.Settings class and I add it to the Drawing database. How to get started with the code and/or correct object?
View 3 Replies View RelatedThe page setup in my copy of Photoshop CS2 defaults to Letter. How can I change this to A4?
View 6 Replies View RelatedBasically I have some business cards Im trying to print on a 8.5 x 11 sheet of paper. There are cutouts in the middle of the page for the cards so im trying to print them exactly inside the cutouts. I measured the sheet myself and I need a 12.70mm offset from the top and bottom of the sheet and a 19.05mm from the 2 sides to get my cards centered in unison with the page cutout. How do you set this up in photoshop? I have CS4 for Mac.
View 2 Replies View RelatedI have a drawing completed but I cannot seem to get the page setup correctly for printing. My drawing is 1:1 and when i go to print preview the page is so much bigger than the drawing. How do I resize this and save the setting. Can I save this setting?
View 1 Replies View RelatedI have existing .NET code that adds page setups to drawings. I now wanted to set the newly added page setup as "current" within the drawing.
The "manual" way to do what I am asking is by clicking the "Set Current" button from within the Page Setup Manager dialog. How would I do this programmatically?
I found an old 2008 post about "removing page setup from several hundred drawings all at the same time?" and the answer was "No".
But is there a way to do it in a single dwg ?
I'd like to make a button with a script behind to delete all existing page setup... in 2013LT
I'm trying to find a setting which allows me to produce pdf copies of AC LT 2014 layouts that do not require rotation to view them in Adobe.
I've searched all through the pdf settings and still I have to rotate the pdf counterclockwise to view it in its correct orientation.
There's a setting which works for MS Office documents in the pdf options section but when this is applied in ACAD it doesn't work and I still have to rotate the view.
have large format printer. I'm trying to set up a configuration for printing on rolls and not on sheets in page set up. But even if i try to make a new one the size doesn't work (61cm - 30,5m).
View 1 Replies View RelatedI am trying, in vane, to batch plot multiple dwg files to pdf's.
I have a pdf reader/writer (Bluebeam Extreme), but the plugin will not work (I have sent an email to Bluebeam to see if hey can sort it out).
So, I tried using the batchplot, but kept getting stuck when I had added multiple dwg's, using Publish, and then tried to change the page setup by right-clicking the files. The new page setup I had just created wass not available, apart from the dwg I created it in.
I hadn't notcied until now, as I usually use the Previous Plot dropdown when plotting, but whenever I create a new Page Setup, it is no longer in the dropdown combo box whenever I open up a new file, or even in the file I created it in if I close it down and reopen.
I am using AutoCAD LT 2010 with Windows 7 Professional, 32 Bit.
Not sure what causes a page setup already created and previously used to not be able to be selected at a later time. When selecting it, it reverts back to <none>. Does this mean the plotter changed/is not available? The network name for the plotter did not change, but the model of the plotter changed slightly. I have the same setup saved in 100's of drawings and assumed that as long as the network name for the plotter remained the same, the setup would continue to work.
View 2 Replies View RelatedI just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
How to fix the “page setup” for all "new" dwg files?
I couldn’t know how we could customize the default plot dialogue settings that the AutoCAD provides as we click the “Plot” command.
For example, each time I start with a new dwg file and click “plot” then I got some default settings.
Then how the settings of the “plot” command can be customized such that as we start with a new dwg file then the customized settings appear?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
View 8 Replies View RelatedWhen attempting to press "page setup" in the print dialog window in cs3, the printer preferences dialog box disappears along with the print dialog window, and every time i bring the preference window back, as soon as i press any button in the window or click on any part of the window it disappears again. Why is this, and how can i stop this. My printer is an Epson 2200, my computer is a 64bit Vista.
View 1 Replies View Relatedwe recently changed the printer we use for 11x17 drawings. Is there a quick way to mass import the new page setup? Or something else quicker and easier than going into each drawing and importing the new page setup one at a time?
View 1 Replies View RelatedI have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
I'm trying to plot a set of drawings that need to be set at 1:1. Every time I pick Custom or 1:1 and set it to 1mm = 1unit, AutoCAD immediately switches it to whatever 1:1_6 is, leaving me with a bunch of empty space around all my viewports.
I'm fairly new at using paper space, and I've never used a plot scale that have underscores in them, so I don't even know what they're representing.
I want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
View 3 Replies View Relatedgetting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
We have just upgraded from 2009 to 2012. Also have merged with a New company that did use xrefernces for there title blocks and we did, and now i am trying to solve how to use there borders to create new page layouts.
Our page setups that we had in 2009 were created by a former employee that is longer with the company.
How we typically started a border/ sheet. We have a separate drawing file that has in model space a 24x36 border with our info that we want repeated on all our sheets.
Now that we are in 2012; The layout tap is a weird size and the 'layout black area' does not match when I import that 24x36 boarder file. The black area does not line up with "0,0,0" and that is what I and trying to figure out how to i make the black area of the layout start at 0,0,0 and be 24x36.
the picture i attached shows 0,0,0 and the 2 borders over layed.
the green box is 24x36.
the blue box is the new border which is ment to be sent within the 24x36 and the brownish red box is the old border and layout and what we used to use.
I am just installed AutoCAD 2010 on Windows 7 (both 64-bit). There is a problem with the Page Setup Manager. When I select any of the page setup tabs, then select "modify" or even "new", the program crashes. Same things happens when I gain access to the Page Set Up Manager through the menu. . Page Manager hasn't ever worked. Update 2 is installed. I have repaired and reinstalled, and tried all again just now. There is no error message beyond "not responding" in parentheses next to name of dialogue box. The screen grays out and stays that way. Then the screen becomes shaded with the whirling aqua ring and it's all over. Control + P and plot causes the system to crash as well.
View 9 Replies View RelatedSystem Autocad 2013 on PC 32bit
Our company as a .ctb file that has been in use for some time. I have upgraded to 2013 and now...
When I open up old files that contain sheets and page setup.
If I attempt to "Modify" or "Create New" Page setup "Page Setup Manager" goes into lock down and freezes everything.
I am unable to change the setup to re-assign the proper .ctb.
I checked with a new document and I am able to access and use the right .ctb.
This is duplicated on everyone of the machines in our office that has 2013 running on PC.
The one machine with Autocad for Mac 2013 works just fine.
right now we out of four computer, we only have one computer running 2008 that do any printing or PDF'ing.
I tried changing the .CTB to an .STB, with no success. Changing the color space does not appear to work.
Is there a problem with my .ctb file that makes it not compatible with 2013?
With ACDLT2010 is there a way to create 1 page setup and force it with one command to all SHEETS (Paper Space) or Multiple Files Model's prior to Batch Plotting a Project?
Reason i ask, is i regularly get files from other contractors, and they use different aspect ratio's / paper sizes / blah bleh blah. Manually going through and changing all the settings is time consuming and would be much easier if i can just pull up a list of drawing's and force a page setup to all pages.
I am trying to batch plot 60 .dwg files to PDF. When I do this, it slices off a piece of the title block on the right.
When I plot a single files I can set it to extents, 11x17, and center the plot, and the PDF comes up perfect.
I save this page setup and try to batch plot again, and when there is only one file on the list, my saved page setup is available in the dropdown menu. The second I add another one, my setup disappears from the list, and the import option doesn't appear to work (I choose a .dwg that my setup has been applied to and nothing happens).
Is there a trick to applying a saved page setup to an entire list of drawings in the batch plot utility?
