I have a drawing completed but I cannot seem to get the page setup correctly for printing. My drawing is 1:1 and when i go to print preview the page is so much bigger than the drawing. How do I resize this and save the setting. Can I save this setting?
View 1 RepliesI'm trying to find a setting which allows me to produce pdf copies of AC LT 2014 layouts that do not require rotation to view them in Adobe.
I've searched all through the pdf settings and still I have to rotate the pdf counterclockwise to view it in its correct orientation.
There's a setting which works for MS Office documents in the pdf options section but when this is applied in ACAD it doesn't work and I still have to rotate the view.
1st Bug:Iam using a HP Z6100PS 60in plotter and when Iam using page setup to print something, it keeps using the default print size... For exemple :
Printer default print size : 24x60
I want to print a 80x60 but Photoshop send a 24x60 to the printer... even if I entered 80x60... And the bug is for any sizes...
2nd bug:My Windows 7 64bits Taskbar is at the top of my screen. All the documents iam opening in Photoshop are snapping to the top of the screen... super annoying. But when I place the Win Taskbar at the bottom of the screen, no more bug...
Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
View 2 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedI recently upgraded to CorelDRAW X5 from X4. I'm having problems printing a landscape page to an Epson Stylus Pro 7880. This is a paper roll feeder. No matter what combination of settings I try it will only print portrait orientation. I had zero problems with X4. I have read as many of the previous forum posts I could find on this issue, so I'll add - I don't have a PPD file and the manufacturer does not either.
View 9 Replies View RelatedIn page setup i have setup my page to print 4 business cards on an A4 page. I have customize the labels myself. Then in print preview i have chosen to print the business cards in the center of the page. But the cards are on the bottom left corner and what ever i do it will not change.
maybe i have to change the margins in page setup-customize label? But don't know the inches.
How can i put my 4 business cards in the center of the page to print?
I was playing around with my settings and did something that is keeping me from printing. When I go to print preview, the page is blank. I have tried opening up jobs that I successfully printed before and they also show and print blank. Everything looks normal in the work area. I just can't print.
View 14 Replies View RelatedWhen printing a image in halftone from Corel x5. The image looks great in print preview but if I try printing it prints a solid black page.
View 7 Replies View RelatedMy CorelMacros.CreateColorSwatch macro has stopped dumping the swatches into whatever blank Letter-sized document I have open (which is how it used to work) and instead it is creating a new document, at 4.25" wide x 7" high, and dumping the swatches into that. Using Pantone Solid Coated, but it's doing this regardless of what palette I choose.
There is no option in the Macro's dialog box to alter or even instantiate a page size, and I cannot find in the code of the macro where to set this variable.
In the past two days, two-page PDFs that I save out of CS6 are printing with the second page upside down. I have tried resaving the documents—didn't work. Tried saving the documents as individual PDFs and combining the PDFs in Acrobat—didn't work. I have had my colleagues print them, and the second page is upside-down too. When I print two-page PDFs that I saved last week or longer ago, I have no problem at all. It just seems to be happening with recently saved PDFs. I didn't update any software on my computer between saving the PDFs that are printing correctly and when this problem began.
View 11 Replies View RelatedWe print out spot color seps every day using CorelDraw X4. After we print out the plates, I have to cut down the vellum that we print on so that we do not have a bunch of extra blank vellum on the sheet.
We make use of the info that is printed on the lower left of every page where it states something like the following:
S:DirectoryWhereTheArtworkisLocatedfilename.cdr
Wednesday, December 23, 2011 8:00 AM
Plate: 1 of 3
After I cut down the sheet, I then have to hand write the name of the spot color onto the sheet of vellum in marker.
Is there any way at all, to make it so that CorelDraw would actually add the name of the spot color that is printed on each page to the information that is already being printed to the lower left? Ideally, it could be placed in the same area where it's already printing the plate information on the last line.
Could it read:
Plate: 1 of 3 Color: Pantone 375
How do I add a new Pagesetup in VB.NET?I know I need the Plot.Settings class and I add it to the Drawing database. How to get started with the code and/or correct object?
View 3 Replies View RelatedThe page setup in my copy of Photoshop CS2 defaults to Letter. How can I change this to A4?
View 6 Replies View RelatedBasically I have some business cards Im trying to print on a 8.5 x 11 sheet of paper. There are cutouts in the middle of the page for the cards so im trying to print them exactly inside the cutouts. I measured the sheet myself and I need a 12.70mm offset from the top and bottom of the sheet and a 19.05mm from the 2 sides to get my cards centered in unison with the page cutout. How do you set this up in photoshop? I have CS4 for Mac.
View 2 Replies View RelatedI have existing .NET code that adds page setups to drawings. I now wanted to set the newly added page setup as "current" within the drawing.
The "manual" way to do what I am asking is by clicking the "Set Current" button from within the Page Setup Manager dialog. How would I do this programmatically?
I found an old 2008 post about "removing page setup from several hundred drawings all at the same time?" and the answer was "No".
But is there a way to do it in a single dwg ?
I'd like to make a button with a script behind to delete all existing page setup... in 2013LT
have large format printer. I'm trying to set up a configuration for printing on rolls and not on sheets in page set up. But even if i try to make a new one the size doesn't work (61cm - 30,5m).
View 1 Replies View RelatedI am trying, in vane, to batch plot multiple dwg files to pdf's.
I have a pdf reader/writer (Bluebeam Extreme), but the plugin will not work (I have sent an email to Bluebeam to see if hey can sort it out).
So, I tried using the batchplot, but kept getting stuck when I had added multiple dwg's, using Publish, and then tried to change the page setup by right-clicking the files. The new page setup I had just created wass not available, apart from the dwg I created it in.
I hadn't notcied until now, as I usually use the Previous Plot dropdown when plotting, but whenever I create a new Page Setup, it is no longer in the dropdown combo box whenever I open up a new file, or even in the file I created it in if I close it down and reopen.
I am using AutoCAD LT 2010 with Windows 7 Professional, 32 Bit.
I cannot find the page setup in the menus of 2.8. For some reason, despite my image being landscape, I cannot change the print orientation to landscape.
In earlier versions, Page Setup was under the File tab, but, for the life of me, I can't find it anymore.
Not sure what causes a page setup already created and previously used to not be able to be selected at a later time. When selecting it, it reverts back to <none>. Does this mean the plotter changed/is not available? The network name for the plotter did not change, but the model of the plotter changed slightly. I have the same setup saved in 100's of drawings and assumed that as long as the network name for the plotter remained the same, the setup would continue to work.
View 2 Replies View RelatedI just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
How to fix the “page setup” for all "new" dwg files?
I couldn’t know how we could customize the default plot dialogue settings that the AutoCAD provides as we click the “Plot” command.
For example, each time I start with a new dwg file and click “plot” then I got some default settings.
Then how the settings of the “plot” command can be customized such that as we start with a new dwg file then the customized settings appear?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
View 8 Replies View RelatedWhen attempting to press "page setup" in the print dialog window in cs3, the printer preferences dialog box disappears along with the print dialog window, and every time i bring the preference window back, as soon as i press any button in the window or click on any part of the window it disappears again. Why is this, and how can i stop this. My printer is an Epson 2200, my computer is a 64bit Vista.
View 1 Replies View Relatedwe recently changed the printer we use for 11x17 drawings. Is there a quick way to mass import the new page setup? Or something else quicker and easier than going into each drawing and importing the new page setup one at a time?
View 1 Replies View RelatedI have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
I'm trying to plot a set of drawings that need to be set at 1:1. Every time I pick Custom or 1:1 and set it to 1mm = 1unit, AutoCAD immediately switches it to whatever 1:1_6 is, leaving me with a bunch of empty space around all my viewports.
I'm fairly new at using paper space, and I've never used a plot scale that have underscores in them, so I don't even know what they're representing.
I am trying to print in landscape on a 5x7. In Image I change print size to 5x7 with no problem. In Page Setup I change from A4 to 5x7, select landscape and click OK. I double check and its restored all settings back to A4. If I print I get half my image in portrait.
The page setup does not appear to accept my changes, why?