In both my Indesign and Illustrator (CS6), I can set up the document as tabloid size but when I try to print there is no Tabloid or custom size available under paper size of print setup and it will only print smaller. I need to print a page that is 8.5X14 as 11X17 with marks and bleeds. Urgent (for work).
View 2 RepliesI’m using Photoshop CS 8.0 not the newer versions of CS2-5, in my previous versions of Photoshop before CS I was able to print Tabloid paper sizes, and in the new CS under page setup tabled is no longer in there. I am running windows 7 64-bit, the printer is a Xerox Work center 7345 with updated drivers. the printer sees and recognizes the paper size under the control panel printer driver preferences. but Photoshop CS will not see that size available.
View 3 Replies View RelatedI use and action to print, save, save to desktop as PDF(using custom preset), close.New acocunt I am working on requests 2 printouts, but cannot record that in the action. If I can edit my actions. Am inexpereinced with this code but my guess is this is the area:
/event-1 {
/internalName (ai11_print_plugin)
/localizedName [ 5
5072696e74
[Code] .....
Not as important but also looking to change page size to tabloid and scale to fit in action.
After moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedI have a 5 section book which I need to print. I usually export to a PDF then re import into a single indesign document. Then use print booklet to print the book. My problem is that I need bleed on my pages so I have set my page size to O/S A4 (32*22.5) When I export to PDF the pages end up A4. How can I export so the page size remains the same?
View 15 Replies View RelatedDialog box:"The active document uses multiple page sizes Print Booklet works only with documents that use a consistent page size."OK, but the page sizes are all the same.
View 26 Replies View RelatedI am producing a newsletter that will be 17x11 with a double fold for mailing. I will also save it as a .pdf for e-mailing. I set my document up as 8.5 x 11, 4 pages. I've put in all my text and graphics but when I go to Print Booklet, the preview looks fine, the problem is when I select print I get this error message: "The active document uses multiple pages sizes. Print Booklet works only with documents that us a consistent page size." I rechecked and all my pages are set for 8.5 x 11.
View 10 Replies View RelatedI have AutoCAD 2007 on my machine.I have made a dll using AutoCAD.NET API which does the task of plotting a DWG harness drawing to a pdf file.I specify the device name and the page size to be plotted in a AutoCAD.NET method SetPlotConfigurationName(ps,"DWG To PDF.pc3",papersize).It works fine as long as I keep on giving default paper sizes.But, when I create a custom paper size using the plot configuration editor which in turn produces a new .pc3 file and when I include the same as the device name in the above mentioned method,it does not work.It throws an exception as eInvalidInput.
View 1 Replies View RelatedI use CS4 and when working in Illustrator ( and later taking into a book in InDesign) how do I maintain custom page size with bleed in Illustrator when saving as PDF . I have been told my files are not print ready and have no bleed even though I set a bleed and accurate (custom)page size initially. It seems I lose these when I save as a PDF for Printers to use.
View 4 Replies View RelatedI'm trying to find a way how to set custom page size in book module... other then is offered for pdf and jpg book version ....
View 1 Replies View RelatedHaven't had this issue until today (after I installed the recent patches)
I created an image 3.004" x 2.0"
I go to print, select my plotter, select print range "selection", go to preferences>advanced, set my paper size to PostScript Custom Page Size, make my paper 3.05x2.05 for a little extra boarder. Back in Print I set my Layout to Preposition to Center of Page which un-greys the position options and now it tells me my image size is 5.1"x2.0 and the Print Preview is showing the center of the image beginning at the left edge of the page...
Mind you, this is the same style of setup I've done numerous times per day for the past 5 years with x6 and x4...magically today it does not center my select graphic to the center of the page. If I put the graphic in the middle of the workpage and tell it to position as in document, it is not an issue, but if the graphic is else where on the workpage, it refuses to center..
I'm having trouble making a custom size print, in LR4.
View 1 Replies View RelatedWhen I try to set a large page size (13X19) in the print screen from GIMP, it will not go beyond 8 X 11. What do I have to do to set up to print larger. When I do page set up, it always reverts to defaults.
View 4 Replies View RelatedSize of page differs in page size dialogue box to that listed in print options box. I changed computers and it works correctly in the second one in that the page size is the same in both boxes, but I still cannot get it to work in the original pc. Both the file and the printer are common. Reinstalling Xara does not work. It looks like it is not installing correctly, even though it appears to be.
View 1 Replies View RelatedI have always been able to print (FIT TO PAGE) 8.5 X 11 (LETTER SIZE) PHOTOS in PREVIOUS VERSIONS OF PHOTOSHOP ELEMENTS! I recently downloaded version 10 and it will not print full page photos. How to achieve printing full size page photos with no white borders around the photo in version 10!
View 1 Replies View RelatedI have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies View RelatedI want to print custom size photo with LR4 and my Epson R2880, Epson driver v8.27, on OS X 10.8.4. In LR4 Print Module I set the cell size slightly smaller than an 8x10 (same aspect ratio but smaller by about 0.5 inch on both sides) on a Letter size paper. In the Epson driver I have tried all sort of options but no matter what I try, the print always come out exactly 8x10.
View 4 Replies View RelatedPrinting pdf's to an HP Designjet 1055 using the new Acrobat X version. I can't change the page size from 8.5x11and nothing comes out at the 1055. Works fine to our Xerox 6204 printers. Looks like I could be going back to Acrobat 9.4...
View 3 Replies View RelatedI have a set of Lightroom Print templates that I am trying to use, that are all for a 4x6 print. I can't get it to work because my page setup in the print module defaults to letter size. When I go in and change the page setup, it messes up the template and it gets all jumbled. Then when I go on to the next template, it switches back to letter size again. I want to create and hold a 4x6 canvas so these templates can either be saved to a 4x6 .jpg or printed on 4x6 paper. I know I can save a printer and page layout as part of a template by clicking the "update settings" once I have it all as i want it, but I can't even get that far because it messes up the template as soon as I change the page settings to 4x6. How do I get the canvas to 4x6 on templates that are already created so I can save them as a 4x6 .jpg or print to 4x6 paper?
I even just installed a printer that only prints 4x6 to see, but again, when I change the page layout it completely messes up the template.
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
Indesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
I'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies View RelatedI am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedUse merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View Relatedis it possible to have folios in decimals?
Each page, i.e.
1
1.1
1.2
1.3
2
2.1
2.2
I need to create a 100 -150 magazine that will perfect bound. We have an InDesign file that we normally use for a 28 page saddle-stitch magazine. Should I use this same file and build on it? Or should I create separate files for the different sections? Can I bring the sections all together at some point? What about page numbering? I am obviously new to InDesign.
View 4 Replies View RelatedI need to edit page numbers (see below). I have tried to delete, move, copy, and select to no avail.
I know you can add page numbers by going to Type > Insert Special Characters > Markers.. The options listed in Markers are not clickable. how I can edit these page numbers.
Why does my InDesign page move when I am dragging text blocks or objects -- when trying to position objects.
I've turned all the "snap tos" off where I can find any
I have been trying to create a PDF of a 36 page document. However, when I get to page 6 I get a message 'downloading font' and then the programme hangs and I have to use windows task master to close it down. There are only three fonts being used on the page and according to Font Finder no fonts are missing. This is driving me crazy and I'm fast approaching my printers deadline.
View 4 Replies View RelatedWe're running InDesign CS6 (version 8.0.1) in my office. When we override and delete a master page item from a page then save out the PDF, the deleted item still shows up in the PDF.
Example: We typeset a string of 250 trading cards. Each card is a separate page, in a single InDesign document, and are all based on one of several possible master pages. On the master page for a given card there are some graphic elements like symbols and directional arrows. During typesetting on a card that uses that specific master page we find one of the pointing arrows needs to be oriented in a different direction. We override the existing arrow and delete it, then replace it with the correct arrow (the arrows are placed graphics). The old arrow is no longer visible in the InDesign file. When it comes time to export the file for the printer we run a script that exports each page as a separate PDF. When we proof the PDFs, the card with the arrow adjustment still shows the deleted arrow, it is visible beneath the new arrow. If we save out that page by itself (with the script or manually), this problem doesn't occur. It only happens when we save out the entire set of cards at once or as a single, multi-page PDF. Though we typically use a script for the export, we still get the same result if we don't use the script.