Does Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
View 2 RepliesIs it a bug or what? Why can't I centre an object to the page in DP6? It's always off by about 5 pixels. I have to manually adjust it every time.
View 7 Replies View RelatedUntitled-1.jpg
i often do a very big and complex mix of logos names and so on.
i´d like to know if ther is any hotkey on how to move any object or a group of objects from far on the page to the page border.
Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
View 3 Replies View RelatedAfter moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedThis was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View Relatedhow to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
View 8 Replies View RelatedIndesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
I am getting an internal error 3541.K.No.ar when trying to add a page to my existing 6 pages
View 3 Replies View RelatedI have found loads of tutorials showing how to do this with a normal single tone page but I am having trouble getting the curl to work well on the bottom right hand corner with the texture and also the torn edge. I have tried distorting it but it just goes all blurred.
View 3 Replies View RelatedIn the past two days, two-page PDFs that I save out of CS6 are printing with the second page upside down. I have tried resaving the documents—didn't work. Tried saving the documents as individual PDFs and combining the PDFs in Acrobat—didn't work. I have had my colleagues print them, and the second page is upside-down too. When I print two-page PDFs that I saved last week or longer ago, I have no problem at all. It just seems to be happening with recently saved PDFs. I didn't update any software on my computer between saving the PDFs that are printing correctly and when this problem began.
View 11 Replies View RelatedWhen I'm working on a design for which I'm generating options, like a logo, I usually work with one Xara file and a new page for each option. When it's time for me to export each page as a JPEG or PNG, it's really frustrating that each and every time I have to tell Xara to save the Page, NOT the default Page Content. I'm thinking there should be a way for Xara to remember and repeat my last export settings, but I can't find it...
View 3 Replies View RelatedI have just started to design my first webpage using Xara Designer Pro 6. I am attemptimg to add a clock widget to the page. how to add the embed code to a page.
View 3 Replies View RelatedIs there a way to save or default my page options...
Page options are set to "cm"
I want "inches".
Is there a way to bring in a pdf, and have more than one page show up.
View 3 Replies View RelatedI have managed to create a hyperlink from an image, to another page on my site. For some reason I am not able to create a link for some other images and I do not know why. (Designer Pro 6). I have used the same settings via link but as said this does not work? Do images have to be a certian format for hyperlinks to work?
View 3 Replies View RelatedI just tried to fill a page with black-filled hexagons so that they are all aligned perfectly vertically and horizontally. I duplicated and positioned as best I could by hand. Then, I used Alignment>equispace on horiz row selections then vert selections. No matter what I do, it will never be perfect with hand placement, obviously.
Is there a way to fill a page with the hexagons so that it looks like the attachment (ie everything perfectly squared in respect to the page)? I would need perfectly uniform spaces between the shapes so that it comes out perfectly squared with the page. This would be the first step I need to do in making a seamlessly tiled alpha for ZBrush.
Is there a way to set what the default page size when you start XP&GD 2013? It always starts with a page size of A4 which I never use. I have a custom template that I would like to set as the default page size.
View 2 Replies View RelatedI would like to have a sales promotion pop up voucher load as soon as the index page loads is this possible in Xwdp7.
In the attached file you can see the white sales voucher over the Jesters restaurant page.
Is it possible to import my existing webpages I have saved on my PC. I want to re-design them and make a few changes etc. I only seem to be able to import the images from a page. Am I being dim or is this simply done? I am using Designer Pro 6
View 4 Replies View RelatedI am using Xara Xtreme 5.1. I am trying to add a new page to my file. Its the first time I have attempt to create a new page. At each attempt it duplicates the 1st page and all its layers. I have unchecked the boxes in the Page Options: Page Size: Document: "All pages in the document the same" and "same layers on all pages in document " and pressed "Apply" . I have tried afresh we a brand new file and yet cannot prevent the duplications.
View 6 Replies View RelatedI cannot find how to show page tabs at the top of my workspace.
I attach a .jpg to show where the tabs are missing (compared with a screen shot of a video that has the tabs in-place).
I am sure they were there originally but cannot restore them (I tried widows -> control bar -> reset, but that didn't work).
In XP&G7, my "Selector" tool has become the "Page Size" tool and I can't select anything. It just changes my page size. What did I do??
View 9 Replies View RelatedI am feeling a bit dumb at the moment. How does one print something larger than the "physical" page size--ie., tiled pages--in Designer Pro 6?
I have a drawing that is 3 times the length of US letter size (actual size of the drawing is 7.5" x 30"). US letter size is 8.5" x 11". The page is defined as landscape, so 11" width, 8.5" height.
I regularly do this using another program and will have constant need to do so in the future.
I try Xara Designer Pro X9 and use PDF Export Options with selected objects for page generation (PDF Export Options).
After PDF export done page size is A4 with my rectangle drawing instead page size with my rectangle size. How can I export to PDF selected rectangle with rectangle page size?