A little + sign appears at the bottom right corner of a text cell when the text overflows. I find I cannot pick up the additional text by clicking the + sign to place it on the next text cell thus linking text from page to page. Am I missing something or is such a useful facility unavailable in Lightroom? If that's the case, is there a good reason for Lightroom not offering text linking between pages?
View 2 Replies
I'm in process of creating a photobook using LR4's Book Module. Whenever I create a multiple columns page or photo caption, the text won't flow from the 1st column into the succeeding column.... The multiple columns feature however does work for normal text placeholders.
View 10 Replies View RelatedUse merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
View 3 Replies View RelatedIf it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
Lightroom may have a great photo editing set of capabilities, but text soooo leaves a lot to be desired. Why isn't there a template in the book module for two columns of text on a page. It seems like a no-brainer.
View 4 Replies View RelatedLightroom 5 (trial) on Mac OS X (Mountian Lion 10.7.5)
I was excited about the book module's "Save as Custom Page" as a solution to preview book we have our lab produce but it seems that several settings are not saved. My intention is for the file name to be under each image but the "Photo Text" checkbox does not stay enabled. Nor, do the zoom settings for the images boxes.
Does "save as custom page" only remember paddding settings and ignore everything else?
This is probably very easy, but I cant figure it out. Whenever I try to type text on the spine of my lightroom book, Lightroom puts it horizontally. I like to rotate the text on the spine of my book by 90 degrees so that it reads from top to bottom, like on any normal book. How do I do that?
By the way, when I start a new book, the spine text appears correctly by default (rotated by 90 degrees). In my existing book, the text cursor appears only for horizontal flow however, despite using the same design template. Is this a bug or did I accidently change the orientation of the text?
Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
After moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedThis was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View Relatedhow to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
View 8 Replies View RelatedIndesign CS6: I've years of extensive experience using Master Pages. Now, however, when I insert a single page in a facing page document, the headers shift off the page. I've tried everything I can think of to stop this. I'm not using liquid layout or any of those layout things.
This is very problematic as I do textbooks with hundreds of graphics and I either have to manually move all the master page items on every page after an insertion; or I have to shift all graphics manually to the next page after moving those to the next page, and the next, and so on.
I'm praying this is just a "hey, you must have X set to X and by deselecting it you'll be fine."
How to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book.
View 5 Replies View RelatedIs there a way to get several pages of existing text from a word processing or page layout program to flow into corresponding pages in Lightroom?
View 3 Replies View RelatedUntitled-1.jpg
i often do a very big and complex mix of logos names and so on.
i´d like to know if ther is any hotkey on how to move any object or a group of objects from far on the page to the page border.
I have found loads of tutorials showing how to do this with a normal single tone page but I am having trouble getting the curl to work well on the bottom right hand corner with the texture and also the torn edge. I have tried distorting it but it just goes all blurred.
View 3 Replies View RelatedIn the past two days, two-page PDFs that I save out of CS6 are printing with the second page upside down. I have tried resaving the documents—didn't work. Tried saving the documents as individual PDFs and combining the PDFs in Acrobat—didn't work. I have had my colleagues print them, and the second page is upside-down too. When I print two-page PDFs that I saved last week or longer ago, I have no problem at all. It just seems to be happening with recently saved PDFs. I didn't update any software on my computer between saving the PDFs that are printing correctly and when this problem began.
View 11 Replies View RelatedI'd like to create a totally custom page, inserting photos at various locations and sizes as well as text regions. Can this be done? I haven't been able to find a way to do this.
View 6 Replies View RelatedDoes Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
View 2 Replies View RelatedI'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies View RelatedStarted producing a new catalogue some time ago very happy working away on the first 3 – 4 pages
Before long I was up to 100 pages, looking fantastic. But then the thought come to me, I have set may page colour to BLACK and all my drawing and text are WHITE as I said looks fantastic until you go to print a page. How much black Ink would you use printing 100 pages black.
SO MY QUESTION IS CAN COREL REVERSE THE LINE ART TO BLACK AND THE PAGE TO WHITE SO I CAN HAVE A PRINTABLE VERSION ?
I have tried publishing to PDF then in acrobat replacing document colours and on screen that works fine but when you print it still prints
With the black background and white text for some reason.
I'm printing a document trying to get two out of each page. I imported text, formatted it within Indesign cs3 and not it's time to copy the block and paste it onto the right side of the page. But the pasted version had a .50 tab at the first word which does not exist on the original side. How do I fix this?
View 7 Replies View RelatedWhen I drag a text from one page to another, the text increases in size. Not sure why.
View 4 Replies View RelatedI am using PS7 to make a website. Have a number of layers done and want to add a long text page Cannot see how. Tried new but that takes me out of that folder, and I want them all together when I upload them.
View 5 Replies View Relatedhow to stretch text across page.
View 9 Replies View RelatedHow can I get the text layer appears as text when applying "Save optimized as" to be HTML and images?
For example:
Suppose I have a simple psd file, which includes a text layer contains the word "Hello World".
Using ImageReady I can convert it into a web page.
I want the resulting web page has the word "Hello World" as a text. i.e, The mouse cursor turns into " I beam" In other word, the word "Hello world" will be available in the page's HTML Source.
I tried to find some thing about this in the manual, but I can not find any thing.
Making the slice type "No Image" is not an option, because I have seen PSD web templates with text turns into real text on optimization and slices which include the text is image type.
I wanted to copy some text from open office into a new page in Photoshop cs3. I know you have to treat the text first, but how? I need to edit it in Photoshop.
I tried to use Acrobat and convert the text to a PDF, but the PDF couldn't be edited after I pasted it into a Photoshop page.
There's a way to do this in Illustrator, I think. but I couldn't find it. And maybe HTML would work.
