I am using Xara Photo & Graphic Designer (non Pro) version 6. I have a custom page size of 10"x7.5". I have turned off the page shadow in File>Page Options>Tab[Page Size]:Section[Spread]:Checkbox[Show page shadow]. The shadow is gone from the view of the document, but when exporting to PDFs, it's back!
View 4 RepliesIn the past two days, two-page PDFs that I save out of CS6 are printing with the second page upside down. I have tried resaving the documents—didn't work. Tried saving the documents as individual PDFs and combining the PDFs in Acrobat—didn't work. I have had my colleagues print them, and the second page is upside-down too. When I print two-page PDFs that I saved last week or longer ago, I have no problem at all. It just seems to be happening with recently saved PDFs. I didn't update any software on my computer between saving the PDFs that are printing correctly and when this problem began.
View 11 Replies View RelatedExporting PDFs from an InDesign file, have tried X-1, X-3, Interactive. When I try to open the PDF in Acrobat, dialog pops up that says "Acrobat could not open <filename> because it is either not a supported file type or because the file has been damaged...
This isn't a PDF that's been emailed or moved between computers, this is right after I export from InDesign on my home PC.
What's going on? I need to print this document tomorrow for a final presentation!
I'm looking for a field or maybe piece of rtext that can display any pdf's that are showing in a drawing, I've had no luck in finding anything that can do it.
View 4 Replies View RelatedI'm currently using Xara Photo and Graphic Designer 2013.
I'm unable to convert pdf's using a cmyk model. I don't have that option available to me.
Which version should I upgrade to, in order to have that functionality?
Certain pdf files will not import even though they look as if they are when I chose to merge. Same thing when I try to open.These very same files can be imported (placed) into Indesign. I have checked layers and there is only one (the visible current one which shows a pdf in the layer properties. It just is not visible though.
View 3 Replies View RelatedWhen you open a PDF you have the choice of opening it for editing. Unfortunately it produces small chunks of text instead of a nice text block. So, you really cannot manipulate it to add text the middle of a paragraph say.
I tried to be clever and selected a bunch of chunks and tried a "combine shapes"" XDP9 did not like that a that at all and went belly up.
If I open a 4-page PDF in CorelDraw, I can edit anything in it. But if I save my changes, it saves as a 4-page cdr file. But I want to save the changes to the PDF. Is the only way to save the changes to the pdf file to re-publish the whole 4 pages to PDF again and have it replace the old one when asked? Wouldn't this further compress any jpgs?
Re-publishing the whole thing and changing the settings to no compression (and remembering to reset them back again later!) seems very inefficient......The question, of course applies to single page pdf's as well, but I'm thinking of deleting or adding a page or changing page order.
I have drawn all this apart from the egg in XDP 6 and when I export to PDF everything except the egg and drop shadow has turned solid black.
If I turn the stroke/shapes back to constant from Dab it comes out fine!
I have attached the original file and the two resultant pdf's.
This post is regarding using Designer Pro to edit print ready PDF's (with crop marks, colour bars etc) created using Photoshop and Illustrator. I can do the edits, but if I try and export the file it corrupts (colour values change, some text changes col)
The files are supplied to me by a designer and sometimes I need to do urgent changes myself before going to print. I have unticked the 'add printers marks' box to avoid a double set of marks and colour bars and have the fonts installed too.
i have been trying for the past hour to export these two files as pdfs for large format print. everything exports fine except the gold trophy design, how to export these for use for large format solvent printing, i normally dont have a problem but this golden shield vector appears to be the problem.
View 5 Replies View RelatedDoes Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
View 2 Replies View RelatedWhy the aren't showing now but the exported files data to that folder is at zero. What I can do to make it reflect what's in the folder?
View 2 Replies View RelatedI was exporting to the pdf many times sending artwork to the printers but now I don't know what to do.The file is 18x3 foot scale 1x1 and it is extremely simple.When I export to the pdf I got file: pls download which is white
View 3 Replies View RelatedI am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again.
View 3 Replies View RelatedOpen Xara Designer 7 for Windows - demo version.
1) Create a solid block of colour at an integer coordinate (say 0,0).
2) Make it an integer width and height (say 128 x 128)
3) Export
4) Choose '.png' (or '.jpg' - the same effect will manifest)
5) Zoom into the preview and see the weird discoloured edges produced
Alternatively, do the same thing with 'Create Bitmap Copy' and observe the same results.
I'm aware that if you have non-integer sizes/positions it anti-aliases, but this isn't supposed to happen if you rectify these.
[Edit: I think I found out what it was: on my Pro version, I have the option to minimise anti-aliasing, which might well be the issue. Oddly, I can't reproduce the problem at all on my Pro version, but only on my brother's demo version!]
This is probably a ridiculously simple thing. I have just started with Xara Photo and Graphic designer 7, and gone through the vids. I am finally acknowledging that Adobe Image Styler (my sweet baby!) is going to have to be given up. Coming from that, I am finding Xara more challenging to use.
When I save an image (jpeg), it exports with a tiny white line around it. I am trying to make a gradient image for a website, and need the edges to blend when I have it repeated (background image).
I've occasionally created some tone-mapped pictures from multiple exposure brackets using the Luminance HDR program. But when I import the jpegs exported from Luminance to Xara, their Red and Blue channels appear to get swapped.
I can fix it by using a Live Effect. But why does this happen? Is there a way to losslessly avoid this before importing to Xara? Because Live Effects impose their own resolution limitations on the image.
I am using CS4. I want to add a shadow to some text. It works on one piece of text, but not on another. It shows the shadow in the layers palette, but it's grayed out (on the one that's not working). I tried converting the text to outlines... same thing. The layer isn't locked... so I don't know what's going on. Why won't my shadow show up?
View 4 Replies View Related I am trying to make a simple wallpaper. I check everything carefully. Make the page 1280 x 800. Make sure the alignment is ok by inserting measurements in the boxes - ie not dragging. Make sure no object is secretly sticking out a bit. I have deleted the page's shadow. But no matter what I do I find there is a white box around the wallpaper I export. Can't figure out why, and can't get rid of it. I have also noticed that sometimes, even though I have set all objects to have a 0 point - ie be butted up against the page - their measurement suddenly will show 7px or such like and it will spring back into misalignment.
I just want to make a simple 1280 x 800 wallpaper for a client, something very easy.
Running Designer pro 6.1.2.13287 on Windows 7 Home Premium
I'm probably bumbling around and buggering up the export of png formatted images, but it appears something besides transparency is getting exported as backbround.
I do `Select all' then export to png.The poorly drawn green arrows were added in photoshop to show the area I'm talking about. The xara document which is apparently also getting exported in some way.At least certain other tools see a black background in that area. Not all tools have that problem with the image. For example; photoshop sees only transparency there.
But when I browse the exported *.png files with `Epson print CD', it sees black in that area as illustrated by the screen grab below.The first two images look clean as expected (I'll explain in a moment) but the third (the one that hasn't been cleaned in Photoshop) shows the black background in that area.
The first two were cleaned up in photoshop and now appear clean as expected.So to get a usable image for import into Epson's tool I must:
1) Export as PNG from Xara
2) Open with Photoshop and run thru a procedure where anything outside the outer blue ring in the image is deleted.(Even though PS only sees transparency, if I select everything from the blue ring outward and delete it, saving back to png, then Epson's tool sees transparency there)
3) Import into `Epson Print CD' and print the graphic to a printable DVD.
How can I skip the second step? That is, how can I get a clean export in step one? What is it that some tools are seeing as black background?
How to make such type of box with shadow? How to change shadows on left / right with shadow tool to have such effect?
I did try but with usual methods did not work for me. See pic attached.
i am using since 5-6 years adobe fireworks, and there it is possible to make inner shadows for object, and this is really great!!!
how can i make same effect with easy in xara designer?
I have a transparent canvas and would like to put a "square" on it. I'd like the content inside the square to be transparent as well, but I'd like to apply the "Drop Shadow" and "Outer Glow" style to the box, while keeping the inside of it transparent.
When I try to do this, nothing occurs because the "square" is empty. The only way I can get the shadow to occur is if I fill in the box with a color, such as white, first. However, then the center isn't transparent how I'd like it to be.
I wish to use a shadow on my web site headings but even after using the HTMLtext (names) tag, after publishing, I cannot find the heading as text, obviously converted to an image.
Is there a way to do this i.e. have a shadow but still read the heading as text in the page view source?
How do I control the color of a shadow with the Shadow tool?
View 5 Replies View RelatedI have just received an "Extra shadow error" and Xara deleted SO MUCH of my progress on my project. Why is this? How can I recover this? I just lost three sessions of labor. I'm going back to Pshop if this keeps happening. I can't afford these kinds of setbacks.
View 7 Replies View RelatedIt is possible to take a floor shadow and curve it around an object? Or does it have to stay straight?
View 9 Replies View RelatedI have something that appears so simple yet I want it to look exactly as example shows and do it with DP7.
I've tried shadow too, and cloning/offsetting. It doesn't give desired look.
3D extruding isn't the answer as then the type gets a skewed perspective and that's not what I need.
Perhaps there's some way this look can be achieved that I don't know about.
Here's the example, then my efforts that don't look right.
There's a remote chance it's the font. If so, how to recognize that font? I do know that original artwork was cut in a 2 pc vinyl stencil as I asked artist but she doesn't recall font or program used as it was a few years ago.
which kind of possibilities are to customize the Floor Shadow for an object?
Basically I would like to change the angle, and of course works the dragging of the shadow to a different place, but have to do for several objects and not sure I can do consequently on the same way with the mouse. (even with keeping the CTRL)
Is there maybe way to set this angle entering numbers?