I have just received an "Extra shadow error" and Xara deleted SO MUCH of my progress on my project. Why is this? How can I recover this? I just lost three sessions of labor. I'm going back to Pshop if this keeps happening. I can't afford these kinds of setbacks.
View 7 RepliesI have a complex building which has floors that 'shift' meaning the floors are at different angles.
I have used sheets to create elevation pages using the elevations revit creates but as there is no shading it is impossible to tell that there are different layers to the building at different points (I have added photos to show this) It looks ok if I use the 3D model instead as that uses shadowing but I can only put one view of it in the sheet.
I either need to find out how to add shadow or how to add more views f the 3D model to show the buildings shape.
I'm messing around with shapes and bevels and I have this shape (attached .xar file) that is basically two lines - I need one of them erased! I don't really care if it's the top line or the bottom one. No this isn't actually two lines, or that would be easy (well it would be draw a rectangle over it and clip it several times, right? But no, this is a shape, so when I draw a rectangle, and try to slide it, it does two things - 1) it does slice the shape, but leaves behind lines or 2) completely removes the original shape and leaves only the (now weird shaped) rectangle. Bevel_Eraser.xar
So how do I get the "extra" line to "erase?
I have a 4" pipe tee that was imported to IV from a neutral format ( I don't remember which one. ) In the end view, there are always extra lines showing extending from the branch of the tee.
I can hide the lines, but that then hides the edge lines of a plate welded to the tee branch. Files are attached
Files and more information is already posted on MCADForums:
[URL]........
How to make such type of box with shadow? How to change shadows on left / right with shadow tool to have such effect?
I did try but with usual methods did not work for me. See pic attached.
i am using since 5-6 years adobe fireworks, and there it is possible to make inner shadows for object, and this is really great!!!
how can i make same effect with easy in xara designer?
In my acaddoc.lsp I have it load an autoload.lsp file that contains many lisp routines (attached). I am getting the "extra right paren on input" error. It appears to error after the third line in the autoload file "san18"....I removed everything after the third line and no error, I put them back and it errors and only loads first three?
I am using Civil 3D 2014 and I have added all neccesary paths to the trusted locations.
I wish to use a shadow on my web site headings but even after using the HTMLtext (names) tag, after publishing, I cannot find the heading as text, obviously converted to an image.
Is there a way to do this i.e. have a shadow but still read the heading as text in the page view source?
How do I control the color of a shadow with the Shadow tool?
View 5 Replies View RelatedIt is possible to take a floor shadow and curve it around an object? Or does it have to stay straight?
View 9 Replies View RelatedI have something that appears so simple yet I want it to look exactly as example shows and do it with DP7.
I've tried shadow too, and cloning/offsetting. It doesn't give desired look.
3D extruding isn't the answer as then the type gets a skewed perspective and that's not what I need.
Perhaps there's some way this look can be achieved that I don't know about.
Here's the example, then my efforts that don't look right.
There's a remote chance it's the font. If so, how to recognize that font? I do know that original artwork was cut in a 2 pc vinyl stencil as I asked artist but she doesn't recall font or program used as it was a few years ago.
which kind of possibilities are to customize the Floor Shadow for an object?
Basically I would like to change the angle, and of course works the dragging of the shadow to a different place, but have to do for several objects and not sure I can do consequently on the same way with the mouse. (even with keeping the CTRL)
Is there maybe way to set this angle entering numbers?
I have the attached image. It is the letters A & D combined, I'm trying to change the shadow color. I selected the shadow in the Layer Gallery and used the Color editor to change the color with no luck. Is there some other approach? I'm just playing around with the image to try to stylize it a little, so it would stand out on a black or white background. The creative part is not a strength.
AD.xar
what's the easiest way to make a paper curl shadow? seems like it is common on Mac's and when using Keynote on the Mac I was thinking of using the mould tool to create a shadow and then put that behind my screenshot, but if there is an easier way, I would love to know. One that looks like the attached.
View 2 Replies View RelatedI create a square, 300px by 300px. I duplicate the square, resize to 200px by 200px. Highlight both, press Ctrl-F4 and remove the inside box. What I have left looks like a picture frame. Is there a way to shadow the inside area? (the part I cut out)
View 5 Replies View RelatedHas anything changed in the export of a document to a PDF.
I have a problem exporting a document that contains a shadow on some text. In the final PDf it shows the shadow as a block. I'm sure i used to be able to convert the text to an editable shape / ungroup them and the problem would be resolved. But it still exports the text with a block behind it.
I found that if I convert the back image under the text to a bitmap it resolves the problem only this causes a color shift in the background, no good when I'm trying to keep constant colors throughout the document.
I've created a bevel, and I'm happy with the basics. Is there a way to adjust the color of the shadow and highlight? I can't seem to find anything.
View 2 Replies View RelatedI'm in need of dimensions of some of the graphics I've made however when exporting to png the dimensions include shadow lengths.
I need the width/height of the object minus shadow. Is this something that can be determined within xara?
I need to produce a PNG image that will be used as a menu bar that has a shadow effect on the top side only. The image will ultimately be just 1 pixel wide and then be repeated as required to create the right width (length) on the web page. How can I slice the image without getting a shadow effect on any of the other 3 sides?
Obviously the edges of the image must be sharp so there is no banding effect when the image is extended.
I am using Xara Photo & Graphic Designer (non Pro) version 6. I have a custom page size of 10"x7.5". I have turned off the page shadow in File>Page Options>Tab[Page Size]:Section[Spread]:Checkbox[Show page shadow]. The shadow is gone from the view of the document, but when exporting to PDFs, it's back!
View 4 Replies View RelatedI have a big problem with the use of Xara Designer Pro 6 ... whenever I tried to export a file (bmp, png, jpg,...) to PDF I get an error and Xara closes?
I have attached the error message? Maybe the required file was not automatically installed and I have to add it manually?
I scanned a document and saved it as pdf, then i tried to import/open it with xara photo & graphic designer 7 and i got an error saying that "this page could not be imported"
could it be from the scanner itself such as restrictions from settings ?
I have a xara file with lots of images.The saved xara file is about 45Mb.If I try and export this as PDF with 300dpi or 600dpi, I get an error that says 'File could not be saved'
Is Designer Pro X not capable of handling this size of file?
I would imagine that there are users out there who are dealing with very large images and probably much larger file sizes.Is it simply that the dpi I am choosing, is the cause?
I have a 12 page brochure which I now need to output to a pdf. I've done similar procedures in the past. But this time I get an error - PDFNET Error: , line 0, bad allocation.
View 3 Replies View RelatedI am getting an internal error 3541.K.No.ar when trying to add a page to my existing 6 pages
View 3 Replies View RelatedWell, I was playing around with Xara's own EPS format and went to load one into another XDP document and..But no worries, Illustrator can open it for editing...
View 9 Replies View RelatedWhen I try to run Xara Designer Pro 7 I get a window popup that tell me "The program could not be started. It's possible that the installation folder is damaged." with the error code: -6
No matter what I try I get that error. I tried with a new doawnloaded file, with the file from the CD, after to have removed files on the Intel SSD or hard drives, and keys in the registry (but maybe i missed some!). I also tried with or without system protections/firewall/antivirus as well with or without administrator rights.
My system is Windows 7 64 bits with Xara designer pro 7.1.1.
I have been getting the following message whenever I log into my XaraXtreme Pro5: Internal Program Error 1383.k.Ob.ee. I have tried logging in as administrator and still got the same message although it didn't seem to bother the operation of the program. I have tried uninstall and reinstall and it would clear it up for awhile but then it would start back up again with that same message and sometimes it would also appear when I tried launching one of the sub-routines such as drawing objects (rectangles, circles, etc.).
View 1 Replies View RelatedIM having a problem with my xara file... it gives me a read error occurred.. i tried to solved it but i failed, although i can see it in preview and no change in file size..
View 9 Replies View RelatedI don't know if this problem was already there in earlier 3ds max versions, but i cant find anywhere on the internet how to create a shadow on a invisible plane like matte shadow could :
View 2 Replies View RelatedI'm trying to add a live effect to my file and I received an error when I tried to add a shatter effect (see attachment). Is this a problem with my copy of the program
View 1 Replies View Related