I have a big problem with the use of Xara Designer Pro 6 ... whenever I tried to export a file (bmp, png, jpg,...) to PDF I get an error and Xara closes?
I have attached the error message? Maybe the required file was not automatically installed and I have to add it manually?
When exporting to SVG is there a way to just have the graphic exported and not the whole page? Even when the graphic is selected when going into the Export option the saved file shows the whole page and not just the graphic.
View 5 Replies View RelatedI permit to come for a new question that concerns the exporting solution in Xara (I have Designer Pro version) in PDF/X mode.
I have some work to do (in Xara as it is my favorite tool), and have to export it 100% correctly in PDF mode for external collaborators, for allowing them to open it and use it in Illustrator software (that's for webdesign : I made the template and external people must be able to use them, in illustrator - or photoshop, it depends).But I get strange results with the texts, with the advanced PDF/X export solution of Xara (the rest is ok).
I can't get a text that can be simply editable when opening illustrator soft. Instead of a rich text editable, in an entire paragraph, I get :
- a "word by word" or "sentence by sentence" editable text. <- that's the best case, but happened only with very simple files, with only few words in it
- a "letter by letter" editable text <- that's unfortunately the more frequent case. If there is a little "too much text" (?!), is works like this.
I send 2 files of examples I made. One simple (with texts, shapes,...), another a very few more complex : just longer texts (only 2). And then the "non editable text" appears : you can select only the letters, not words or better : paragraphs.I put the 2 xara files, and the 2 pdf/X exported files. (I precise the option "convert text into files" is, of course, not effective).
But I am having some issues in exporting Xara files to either JPG or PNG.
I am developing maps in Xara for use in an online program called Maptool. My current project is to vector a city built around a volcano so it has better detail than what it did in the original map. First off this is a very large map and I have to be able to zoom in use the standard scale of 5ft for use in Maptools (it is probably zoomed in to about 50ft for this).
1. What is the best format and settings to export a file so that when I zoom in real close (500% to 600% zoom) it doesn't look badly pixelated? I also want it to still have good visuals when I zoom it out to 15% to see the whole map (or most of it.
2. When I export the file as a PNG and open it in maptool to use it as a map some of the objects I placed on it in Xara have either moved slightly or changed size. I am not sure which yet but they look more re-sized than anything. Why and how do I stop this?
3.When I exported the map one time I noticed a building was missing from the original xara file. I went back to recreate it and it was still there, so I assumed I just didn't have it clicked when I exported it. That wasn't the case. The building shows up where I originally drew it but I can't edit or delete it. I can see it, but when I copy and paste or export it into another file the building isn't there.
4. Is it possible to change the units and size of the artboard after the project has been created and worked on for a few days? If so, how?
I tried to move my map project to a new file (after encountering the problem described in #3 above). The original settings were in pixels and is a very huge map. I set the new document in inches (or feet) but I couldn't make the artboard large enough to fit my project. I am not sure how to change from one measurement to another. When I did first save it in another file I could not edit the whole map as my limits are the new document size settings and my project is larger than those settings.
My current export settings are: True color + Alpha. I have removed all the transparency effects as they look horrible in the export so far.
I'm currently using Xara Photo and Graphic Designer 2013.
I'm unable to convert pdf's using a cmyk model. I don't have that option available to me.
Which version should I upgrade to, in order to have that functionality?
Fro example when i release to layers in illustrator i than can use separete objects in after effects to animate it. In xara i find one option is to export separate layers as png. Is kind a way to go but not when i have my entire document with hundreds of objects on one layer.
View 9 Replies View RelatedImport a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
When I export a Xara P&GD file as a PDF, none of the photo edits make it through. I cropped & lightened a lot and they show up as the original darker version. I did "save" the file and all its editing prior to exporting it.
View 6 Replies View RelatedI am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
I have to get to my printer ASAP with these images and i am having issues with a memory exception error, i have tried different computers to no avail, i have attached the .xar file and i need both images exporting as 300dpi jpegs. the images in the file are at 100% size but i can also live with 50% 300dpi jpeg exports.
the black background is C35 M35 Y35 K100 (rich black) and i have converted all fonts to shapes won't need the fonts. Both images use the 'speedometer' graphic as a clip view
when i create images in Xara they look very clear and crisp but once exported and appear on the website they lose their clarity and sharpness.
Which brings me to the question.. what is the best way to export images for a website? Are there advanced settings that I may use to improve the images appearance on the website.
Heres a link to a website: [urL]........ and Im uploading the Xara document as well.
I love designing vehicle wraps in XD Pro6 but what can I do to export a large image. If I design at half scale then try to export at 200 dpi it crashes and says out of memory.
Have a quad core with 8gb ram Win7 64 bit.
If I export text to PDF my font become BOLD and does not look like in Xara. I used Arial font. Is it possible to prevent Xara from embedding font when exporting to PDF? I deselected that option in export settings, however, it still does it.
(it does not do that only if I select first option when exporting to PDF called Draft Quality, however, in this mode pictures are in low resolution)
I have been manipulating a file which has text on a transparent background but the text on the image has the obligatory white jaggies around the fringes. I can't for the life of me establish what I am doing wrong as I have done this before without this same issue.
View 8 Replies View RelatedI exported a part of a Xara design as a .xar file and choose 'selection' when prompted (as opposed to 'drawing'). This successfully create a .xar with just the objects I selected, however when I go to File->Import and select this file the preview panel shows an image of the entire original document, which is misleading as to the contents of the .xar. Bug or not?
View 2 Replies View RelatedHas anything changed in the export of a document to a PDF.
I have a problem exporting a document that contains a shadow on some text. In the final PDf it shows the shadow as a block. I'm sure i used to be able to convert the text to an editable shape / ungroup them and the problem would be resolved. But it still exports the text with a block behind it.
I found that if I convert the back image under the text to a bitmap it resolves the problem only this causes a color shift in the background, no good when I'm trying to keep constant colors throughout the document.
When exporting a map to either PDF or AI (Adobe Illustrator), I inexplicably get a slight, straight, diagonal line that runs across the map.
View 9 Replies View RelatedI had an advertisement that I created in Graphic Designer 6 that is going to run in a paper as black and white. Does Xara GD6 have the ability to export as a B&W or a grayscale image? Or will I need to manually alter all of the colors of the ad and then export it?
View 9 Replies View RelatedWhen I try and export my document as a PDF I get "Access violation exception at 0x090ABC51."
View 3 Replies View RelatedI'm using Photo & Graphics Designer 7. Recently I've had the problem of the program no longer exporting PNG images I create with transparent backgrounds. They all have a box containing whatever color background I'm using at the time. I am selecting only the object I want to export.
View 8 Replies View RelatedAll of a sudden I am getting an error when I try and export my photos to a dvd from lightroom3. Ive never had this issue before and Im not sure what to do to fix it. how I can burn my images to a disc?
View 3 Replies View RelatedI'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
I'm trying not to have to reproduce days of work to remake the file.
I can't seem to export photos as I get the following error message when trying:
invalid parameter name: colour nosie reduction smoothness
When I attempt to export a group of approximately 50 photos from LR4, a window opens at the end of the process saying "The file could not be written" along with a list of approximately 10-15 NEF file names. I have never had a problem exporting before, but I recently started storing my LR catalog and files on an external USB 3.0 drive.
Here are the details:LR4 with latest updatesWin 7 with latest updatesLR catalog and photo files stored on external USB 3.0 G: driveTrying to export to a folder on my desktop on C: drive (46GB free out of 134GB, solid state drive)LR files are NEF, exported files are JPGI've tried to export to the same group of photos multiple times with different names and different output file sizes (8MB, 5MB, 2MB). Each time the list of failures is different.Some of the thumbnails which appear in Windows Explorer are corrupted (part of the thumbnail is gray)When I try to export the same group of photos to the external USB 3.0, it works perfectly!
Here is an example of one of the LR log files:
The file could not be written. (17)
G:2013Stratton and Colorado20132013-06-23\_D7K1915.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1918.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1919.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1939.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1948.NEF
[code].....
I scanned a document and saved it as pdf, then i tried to import/open it with xara photo & graphic designer 7 and i got an error saying that "this page could not be imported"
could it be from the scanner itself such as restrictions from settings ?
I have a xara file with lots of images.The saved xara file is about 45Mb.If I try and export this as PDF with 300dpi or 600dpi, I get an error that says 'File could not be saved'
Is Designer Pro X not capable of handling this size of file?
I would imagine that there are users out there who are dealing with very large images and probably much larger file sizes.Is it simply that the dpi I am choosing, is the cause?
I have a 12 page brochure which I now need to output to a pdf. I've done similar procedures in the past. But this time I get an error - PDFNET Error: , line 0, bad allocation.
View 3 Replies View RelatedI am getting an internal error 3541.K.No.ar when trying to add a page to my existing 6 pages
View 3 Replies View RelatedCan't seem to be able to Export to ACAD 2007 without the following appearing
Recover has found no errors, all XREFS have been bound and I've even exploded AEC objects
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm trying to export my iam file to a 3D DWG file. When I do, I get the following error:
Runtime Error!
Program: C:Program FilesAutodeskInventor 2012BinInventor.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
My Lightroom has unexpectedly stopped exporting files. Nothing that I am aware of has changed--I haven't changed cameras or added new software. No error message comes up, it just does nothing after the Export dialog box.
View 2 Replies View Related