Fro example when i release to layers in illustrator i than can use separete objects in after effects to animate it. In xara i find one option is to export separate layers as png. Is kind a way to go but not when i have my entire document with hundreds of objects on one layer.
View 9 Replieshow to edit revit objects in 3dsMax. How do I separate objects to make them individual objects? In other words, when I try to select the roof, I get ALL objects that are "dimensional lumber" i.e. I joists, roof, fascia, etc.
I tried selecting a roof polygon and making a copy and editing it but still when I apply materials to this polygon they apply to all of the dimensional lumber. Probably because I made a copy as a clone but it didn't give me the "copy" option.
I recently found a command on the internet that enables only solids in a .dwg to be exported to a seperate autocad .dwg, muggins here didnt take a note of the command and I have searched google ten times over to find it again but to no avail.
View 1 Replies View RelatedIn Adobe Illustrator CS5, you now have the capability give a name to each artboard in your illustrator file. I understand that you can easily save each artboard as separate AI files but I would like to save them as separate PDFs instead.
Any script, or know the actual method of doing so? All I can possibly theorize is to save the artboards as separate PDFs and then have Acrobat convert those artboards to PDFs.
Is there a way to export all frames of an animation at once as a sequence of gif files? (rather than going to file-->save for each frame)
A related question: is there a way to select multiple objects on different frames for easy editing?
Is there a way to morph 2 separate objects from one to another?
So far all I've found is morphing 2 objects who have the same root-object
Is it possible to morph 2 totally different objects without any root-relation?
Intel 7 - 2.8Ghz
NVidia Quadro 4000 2Gb GDDR5
8Gb RAM
3D Studio Max Design 2013 x64
Windows 7 x64
I am using Xara's Photo & Graphic Designer for the first time and slowly getting acclimated to the program after using Ulead's Photo Impact for 6 years.
Just one really basic question. I have three elements in my final design: two seperate lines of text surrounded by a black outline. To save this as a single graphic (.gif format), what do I need to do? With Ulead all I had to do was select all, right click and select merge as one, then simply save in whatever format I wanted to the destination of my choosing.
Is there a similar "merge as one" command in Xara or do I select each element in my graphic, then choose save from the file menu?
Is there a way to have separate objects in 1 layer, what i mean is that if you paste something, that i want it to show up as a objects in de layer, like in photoshop, so i can still drag it around.
but the way it is now, is just if you paste something that it REALLY pastes it on the images, you can't move it around after you deselected it.
I'm asking specifically about rigging a gun, where there are about 3 moving parts.
I'm not able to paint weights when it's all put together, so need them separate, and need to assign bones exclusively to each moving part.
On illustrator cs6, I have a complex shaped with a gradient fill. when I go to expand there is an option that says Expand Gradient and you select the amount of objects. so I selected 6 objects, and the expand tool did what I expected, my object got divided into 6 objects with fill colors relative to the gradient.
so I hit undo, and I moved a stop on my gradient slightly to affect the results a bit, and now it wont expand the same way. my gradient stays a gradient. I tried drawing new shapes with gradients and the gradient wont expand.
I have an object with several animation layers. When I clone(copy) it, the new object also has the same animation layers. That should be OK.
The weird thing is, when I start to mess with the animation layers of the second object. If I disable, lets say, layer02 on the second object, it affects(disables) layer02 on the first one. Somehow the objects are connected through the animation layers.
Is this the normal behavior of the animation layers? And if it is, how can I make two separate copies of the animated objects?
I came across this site a few weeks ago and was happy to see that a community like this existed. I am new to CorelDraw and have been playing around with it because my friend just bought a Roland GX-24 vinyl cutter and I wanted to make some designs for it. I, however, am overly experienced with Photoshop and not enough with CorelDraw, but would like to balance that out.
I came across my recent predicament when I exported my CorelDraw image into Roland CutStudio and it wanted to cut all the underlying curves from each layer, instead of the black and white image as it appeared. I wasn't surprised this happened because I couldn't figure a way to join/ merge the curves before I exported, but I was still hopeful that it might cut the image as it appeared.
This first object is a blade layer and as you can see from the picture, when selected, its curve goes right through the other spiral object. How can I merge these curves? As it stands right now, I can't even figure out a way to select the two of them at the same time, let alone join the curves.
....and vice versa in this picture, the spiral object when selected goes right through the blade
....and in the foremost layer of the image when selected, the curves also continue through the spiral
Here is a picture of the current layers for this whole image. The front layer I paint bucket filled numerous portions of it with white so it stuck out above the bottom two other layers, so all the fills make it a group of 161 objects, and the next layer is a group of 2 objects which are the spiral and the blade from the first 2 pictures.
My question is how can I merge or join all the curves in the entire image, essentially flattening the whole image as it appears?
I have a block which represents a piece of equipment on a factory floor. It has two subcomponents which are blocked with the main equipment. Consider a rectangle and two smaller circles blocked together. Each of the subcomponents (circles) has a point parameter and a move feature so that the components can be moved independently from each other and from the main equipment.
Here's the issue: If a user accidentaly (or purposely) places the grip from one of the subcomponents snapped to the grip of the other subcomponent, then the two seem forever attached; when I try to grab the grip of one of the subcomponents to separate them, both grips get selected and both components move together. At this point the two components appear to be inseparable with the grips permanently joined.
Here's the question: Is there a way to separate the two components once their grips are made coincedent? Or is this a case of "just don't snap the grips together"? I'd like there to be a way to pull the components apart.
I have created custom text, so that each letter in my 3 letter word is a separate compound object.
Now I have made a filled (with gradient) ellipse and rectangle behind the text to create a clipping mask with all 3 text objects. (see image1) However, when I select all the objects and select: object>clipping mask >make, it only mask the one letter, which is the one on top. (see image 2)
However, when I group the 3 letters together, it does not create a clipping mask at all, it shows nothing... (see image 3)
How do I ake all 3 letters be in the mask?
[URL]
When exporting to SVG is there a way to just have the graphic exported and not the whole page? Even when the graphic is selected when going into the Export option the saved file shows the whole page and not just the graphic.
View 5 Replies View RelatedIs this possible? The problem with the express tools is that they place these single line text objects into one MLtext which is not what I want.
View 9 Replies View RelatedI permit to come for a new question that concerns the exporting solution in Xara (I have Designer Pro version) in PDF/X mode.
I have some work to do (in Xara as it is my favorite tool), and have to export it 100% correctly in PDF mode for external collaborators, for allowing them to open it and use it in Illustrator software (that's for webdesign : I made the template and external people must be able to use them, in illustrator - or photoshop, it depends).But I get strange results with the texts, with the advanced PDF/X export solution of Xara (the rest is ok).
I can't get a text that can be simply editable when opening illustrator soft. Instead of a rich text editable, in an entire paragraph, I get :
- a "word by word" or "sentence by sentence" editable text. <- that's the best case, but happened only with very simple files, with only few words in it
- a "letter by letter" editable text <- that's unfortunately the more frequent case. If there is a little "too much text" (?!), is works like this.
I send 2 files of examples I made. One simple (with texts, shapes,...), another a very few more complex : just longer texts (only 2). And then the "non editable text" appears : you can select only the letters, not words or better : paragraphs.I put the 2 xara files, and the 2 pdf/X exported files. (I precise the option "convert text into files" is, of course, not effective).
I have a big problem with the use of Xara Designer Pro 6 ... whenever I tried to export a file (bmp, png, jpg,...) to PDF I get an error and Xara closes?
I have attached the error message? Maybe the required file was not automatically installed and I have to add it manually?
But I am having some issues in exporting Xara files to either JPG or PNG.
I am developing maps in Xara for use in an online program called Maptool. My current project is to vector a city built around a volcano so it has better detail than what it did in the original map. First off this is a very large map and I have to be able to zoom in use the standard scale of 5ft for use in Maptools (it is probably zoomed in to about 50ft for this).
1. What is the best format and settings to export a file so that when I zoom in real close (500% to 600% zoom) it doesn't look badly pixelated? I also want it to still have good visuals when I zoom it out to 15% to see the whole map (or most of it.
2. When I export the file as a PNG and open it in maptool to use it as a map some of the objects I placed on it in Xara have either moved slightly or changed size. I am not sure which yet but they look more re-sized than anything. Why and how do I stop this?
3.When I exported the map one time I noticed a building was missing from the original xara file. I went back to recreate it and it was still there, so I assumed I just didn't have it clicked when I exported it. That wasn't the case. The building shows up where I originally drew it but I can't edit or delete it. I can see it, but when I copy and paste or export it into another file the building isn't there.
4. Is it possible to change the units and size of the artboard after the project has been created and worked on for a few days? If so, how?
I tried to move my map project to a new file (after encountering the problem described in #3 above). The original settings were in pixels and is a very huge map. I set the new document in inches (or feet) but I couldn't make the artboard large enough to fit my project. I am not sure how to change from one measurement to another. When I did first save it in another file I could not edit the whole map as my limits are the new document size settings and my project is larger than those settings.
My current export settings are: True color + Alpha. I have removed all the transparency effects as they look horrible in the export so far.
I'm currently using Xara Photo and Graphic Designer 2013.
I'm unable to convert pdf's using a cmyk model. I don't have that option available to me.
Which version should I upgrade to, in order to have that functionality?
Import a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
When I export a Xara P&GD file as a PDF, none of the photo edits make it through. I cropped & lightened a lot and they show up as the original darker version. I did "save" the file and all its editing prior to exporting it.
View 6 Replies View RelatedI am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
I have to get to my printer ASAP with these images and i am having issues with a memory exception error, i have tried different computers to no avail, i have attached the .xar file and i need both images exporting as 300dpi jpegs. the images in the file are at 100% size but i can also live with 50% 300dpi jpeg exports.
the black background is C35 M35 Y35 K100 (rich black) and i have converted all fonts to shapes won't need the fonts. Both images use the 'speedometer' graphic as a clip view
when i create images in Xara they look very clear and crisp but once exported and appear on the website they lose their clarity and sharpness.
Which brings me to the question.. what is the best way to export images for a website? Are there advanced settings that I may use to improve the images appearance on the website.
Heres a link to a website: [urL]........ and Im uploading the Xara document as well.
I love designing vehicle wraps in XD Pro6 but what can I do to export a large image. If I design at half scale then try to export at 200 dpi it crashes and says out of memory.
Have a quad core with 8gb ram Win7 64 bit.
If I export text to PDF my font become BOLD and does not look like in Xara. I used Arial font. Is it possible to prevent Xara from embedding font when exporting to PDF? I deselected that option in export settings, however, it still does it.
(it does not do that only if I select first option when exporting to PDF called Draft Quality, however, in this mode pictures are in low resolution)
I have been manipulating a file which has text on a transparent background but the text on the image has the obligatory white jaggies around the fringes. I can't for the life of me establish what I am doing wrong as I have done this before without this same issue.
View 8 Replies View RelatedI exported a part of a Xara design as a .xar file and choose 'selection' when prompted (as opposed to 'drawing'). This successfully create a .xar with just the objects I selected, however when I go to File->Import and select this file the preview panel shows an image of the entire original document, which is misleading as to the contents of the .xar. Bug or not?
View 2 Replies View RelatedHas anything changed in the export of a document to a PDF.
I have a problem exporting a document that contains a shadow on some text. In the final PDf it shows the shadow as a block. I'm sure i used to be able to convert the text to an editable shape / ungroup them and the problem would be resolved. But it still exports the text with a block behind it.
I found that if I convert the back image under the text to a bitmap it resolves the problem only this causes a color shift in the background, no good when I'm trying to keep constant colors throughout the document.
When exporting a map to either PDF or AI (Adobe Illustrator), I inexplicably get a slight, straight, diagonal line that runs across the map.
View 9 Replies View Related