When exporting to SVG is there a way to just have the graphic exported and not the whole page? Even when the graphic is selected when going into the Export option the saved file shows the whole page and not just the graphic.
View 5 RepliesI permit to come for a new question that concerns the exporting solution in Xara (I have Designer Pro version) in PDF/X mode.
I have some work to do (in Xara as it is my favorite tool), and have to export it 100% correctly in PDF mode for external collaborators, for allowing them to open it and use it in Illustrator software (that's for webdesign : I made the template and external people must be able to use them, in illustrator - or photoshop, it depends).But I get strange results with the texts, with the advanced PDF/X export solution of Xara (the rest is ok).
I can't get a text that can be simply editable when opening illustrator soft. Instead of a rich text editable, in an entire paragraph, I get :
- a "word by word" or "sentence by sentence" editable text. <- that's the best case, but happened only with very simple files, with only few words in it
- a "letter by letter" editable text <- that's unfortunately the more frequent case. If there is a little "too much text" (?!), is works like this.
I send 2 files of examples I made. One simple (with texts, shapes,...), another a very few more complex : just longer texts (only 2). And then the "non editable text" appears : you can select only the letters, not words or better : paragraphs.I put the 2 xara files, and the 2 pdf/X exported files. (I precise the option "convert text into files" is, of course, not effective).
I have a big problem with the use of Xara Designer Pro 6 ... whenever I tried to export a file (bmp, png, jpg,...) to PDF I get an error and Xara closes?
I have attached the error message? Maybe the required file was not automatically installed and I have to add it manually?
But I am having some issues in exporting Xara files to either JPG or PNG.
I am developing maps in Xara for use in an online program called Maptool. My current project is to vector a city built around a volcano so it has better detail than what it did in the original map. First off this is a very large map and I have to be able to zoom in use the standard scale of 5ft for use in Maptools (it is probably zoomed in to about 50ft for this).
1. What is the best format and settings to export a file so that when I zoom in real close (500% to 600% zoom) it doesn't look badly pixelated? I also want it to still have good visuals when I zoom it out to 15% to see the whole map (or most of it.
2. When I export the file as a PNG and open it in maptool to use it as a map some of the objects I placed on it in Xara have either moved slightly or changed size. I am not sure which yet but they look more re-sized than anything. Why and how do I stop this?
3.When I exported the map one time I noticed a building was missing from the original xara file. I went back to recreate it and it was still there, so I assumed I just didn't have it clicked when I exported it. That wasn't the case. The building shows up where I originally drew it but I can't edit or delete it. I can see it, but when I copy and paste or export it into another file the building isn't there.
4. Is it possible to change the units and size of the artboard after the project has been created and worked on for a few days? If so, how?
I tried to move my map project to a new file (after encountering the problem described in #3 above). The original settings were in pixels and is a very huge map. I set the new document in inches (or feet) but I couldn't make the artboard large enough to fit my project. I am not sure how to change from one measurement to another. When I did first save it in another file I could not edit the whole map as my limits are the new document size settings and my project is larger than those settings.
My current export settings are: True color + Alpha. I have removed all the transparency effects as they look horrible in the export so far.
I'm currently using Xara Photo and Graphic Designer 2013.
I'm unable to convert pdf's using a cmyk model. I don't have that option available to me.
Which version should I upgrade to, in order to have that functionality?
Fro example when i release to layers in illustrator i than can use separete objects in after effects to animate it. In xara i find one option is to export separate layers as png. Is kind a way to go but not when i have my entire document with hundreds of objects on one layer.
View 9 Replies View RelatedImport a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
When I export a Xara P&GD file as a PDF, none of the photo edits make it through. I cropped & lightened a lot and they show up as the original darker version. I did "save" the file and all its editing prior to exporting it.
View 6 Replies View RelatedI am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
I have to get to my printer ASAP with these images and i am having issues with a memory exception error, i have tried different computers to no avail, i have attached the .xar file and i need both images exporting as 300dpi jpegs. the images in the file are at 100% size but i can also live with 50% 300dpi jpeg exports.
the black background is C35 M35 Y35 K100 (rich black) and i have converted all fonts to shapes won't need the fonts. Both images use the 'speedometer' graphic as a clip view
when i create images in Xara they look very clear and crisp but once exported and appear on the website they lose their clarity and sharpness.
Which brings me to the question.. what is the best way to export images for a website? Are there advanced settings that I may use to improve the images appearance on the website.
Heres a link to a website: [urL]........ and Im uploading the Xara document as well.
I love designing vehicle wraps in XD Pro6 but what can I do to export a large image. If I design at half scale then try to export at 200 dpi it crashes and says out of memory.
Have a quad core with 8gb ram Win7 64 bit.
If I export text to PDF my font become BOLD and does not look like in Xara. I used Arial font. Is it possible to prevent Xara from embedding font when exporting to PDF? I deselected that option in export settings, however, it still does it.
(it does not do that only if I select first option when exporting to PDF called Draft Quality, however, in this mode pictures are in low resolution)
I have been manipulating a file which has text on a transparent background but the text on the image has the obligatory white jaggies around the fringes. I can't for the life of me establish what I am doing wrong as I have done this before without this same issue.
View 8 Replies View RelatedI exported a part of a Xara design as a .xar file and choose 'selection' when prompted (as opposed to 'drawing'). This successfully create a .xar with just the objects I selected, however when I go to File->Import and select this file the preview panel shows an image of the entire original document, which is misleading as to the contents of the .xar. Bug or not?
View 2 Replies View RelatedHas anything changed in the export of a document to a PDF.
I have a problem exporting a document that contains a shadow on some text. In the final PDf it shows the shadow as a block. I'm sure i used to be able to convert the text to an editable shape / ungroup them and the problem would be resolved. But it still exports the text with a block behind it.
I found that if I convert the back image under the text to a bitmap it resolves the problem only this causes a color shift in the background, no good when I'm trying to keep constant colors throughout the document.
When exporting a map to either PDF or AI (Adobe Illustrator), I inexplicably get a slight, straight, diagonal line that runs across the map.
View 9 Replies View RelatedI had an advertisement that I created in Graphic Designer 6 that is going to run in a paper as black and white. Does Xara GD6 have the ability to export as a B&W or a grayscale image? Or will I need to manually alter all of the colors of the ad and then export it?
View 9 Replies View RelatedWhen I try and export my document as a PDF I get "Access violation exception at 0x090ABC51."
View 3 Replies View RelatedI'm using Photo & Graphics Designer 7. Recently I've had the problem of the program no longer exporting PNG images I create with transparent backgrounds. They all have a box containing whatever color background I'm using at the time. I am selecting only the object I want to export.
View 8 Replies View RelatedI'm exporting a CorelDrawX5 file as an EPS so it can be opened in Router VCarve software. All the lines of the artwork in the CDR file show up as solid lines before being exported.
After being opened in the Router software as an EPS, the lined artwork shows up in pieces. I've never had this issue before with the Vcarve software or Corel, but I even tried rebuilding the files from scratch, and it still happened so I'm thinking its a corel issue.Â
We import an MP4 file into VideoStudio Pro X3 and simply add a title and do minor editing. We then want to render back out as an MP4 file.
The problem we're having is the export file is HUGE. Even when exported as a iPad 640 file (which I believe reduces everything to 16 bit) the file is usually about 300% larger than the original. Our originals are typically 300 megs or so and the out put file from VideoStudio is about 1 gig.
I am using corel x6 and out putting to laser engraver/cutter, router and water jet. For laser engraving in particular i am have trouble getting a reasonable image. It ends up being pixulated. An it is odd as some times i am engraving one inch square area and some times 2 feet square. The relationship between DPI and size seems to be broken and i can not figure out why. I am normally working with vectors but some times i need to engrave with a bit map. So i will export the vector to a bit map then import the bitmap into a new document and output to the laser. I output to the laser directly from with in corel 13. It is when i import into corel that i can see that the bitmap is pixulated. if I export at 1200 dpi it is better but not good enough. For an 11 inch square out put i think it was a 43 mb file. [URL]....
View 4 Replies View RelatedI am facing the memory problem in CS3 when I try to export the PSD file to "Save for web & Devices..." option in file menu. It says the message dialog each time.
View 1 Replies View RelatedI'm new to using AutoCAD but learn very quickly. My boss wants me to export our cad file to pdf, but he wants it to have the black background and the colored layers. I have found how to export the color on the layers but not the black background.
View 7 Replies View RelatedJust a quick question, I'm wondering if there is a fix in 3ds max (64) 2011 regarding exporting .mov files. We are in the FIRST Robotics competition and the Autodesk 3D Animation Contest requires the final movie to be in .mov format.
I can always export individual frames and composite the work in Premiere, perhaps a better process in the end; regardless I would love to hear of how the problem will be solved with Apple (just a guess) down the road
I recently tried exporting a 180 mb .skp file into 3ds max Design 2012. I can actually access the file, and no errors appear when I use the import command. However, I encountered difficulties in the actual import, as the status bar simply does not move. It doesn't show that it's reading the file, or even started importing, and my system is still running smoothly, even cancelling import doesn't lag. My concern is that it simply won't work with a large file. Is there a size limit to what you can import, or am I doing something wrong? Converting the scene to .3ds in sketchup takes too long.
View 7 Replies View RelatedI'm working on a plugin that involves exporting a dwg to a wmf.
-Initial thoughts were that this functionality might be exposed through the .NET API and I would just be able to call it directly, passing various information, such as a Selection Set. Correct me if I am wrong, but I can't find anything in the API that provides this functionality.
-Next thought was to call the "WMFOUT" command using the SendStringToExecute() function. This also won't seem to work perfectly as it executes after the .NET command is finished and the user will have to specify a filename and select objects to export. (Preferably those last steps would be automated by the plugin)
I have a model that appears to be too complex for exporting into AGI32 for lighting. I'm pretty sure I have seen several models exported from AutoCAD into AGI and rendered with lighting very successfully.
View 4 Replies View RelatedI had LR 4.1 on my machine. I upgraded PS CS 5 to CS 6 and now LR 4 does not recognize CS 6.Â
View 1 Replies View RelatedI am a photography and most of the time I send my jpeg files to a professional lab In LR3 the images are exposed correctly but when I recieve them back from the lab the are too dark.. I have a Hiti printer and home and when I print the images come out a little over exposed. My question is how can I export a file from LR3 correctly and be confident that when I send them to a Lab they will come back correctly exposed?
View 5 Replies View Related