I have a 4" pipe tee that was imported to IV from a neutral format ( I don't remember which one. ) In the end view, there are always extra lines showing extending from the branch of the tee.
I can hide the lines, but that then hides the edge lines of a plate welded to the tee branch. Files are attached
Files and more information is already posted on MCADForums:
[URL]........
Had these lines show up in ACAD. I have to restart everything to get them to go away.
View 1 Replies View RelatedWhen plotting any IDW files to our full size plotter, I have ghost lines running through the drawing (lines that are not present in the drawing, on screen or preview) alomost like the plotter is printing extra extension lines on the drawings, overlaying 2 sheets on 1 drawings and even moving some text on the drawings. I have all the SP's and am lost. I can move to another computer and print drawings fine so its not a plotter issue.
View 2 Replies View RelatedI just set up an angle constrain with min and max values (explicit vector) and when I grab and move the part inv will crash, it happened 2 times after restart too...
I have inv2013 Pro with the latest SP1 installed - win7 ultimate
I have a problem in my ucs icon when i am drawing/rotating and dimensioning my drawing.. the ucs turns to have extra lines and even the dimensions has unnecessary lines. how am i suppose to fix this
View 2 Replies View RelatedI am using 2013 and have a few 3D objects in the modeling space that I am using view base to put different views of each into the paper space. When I do this and export to PDF, I get an extra green line from the paper space. I have deleted and replaced the view and have tried different views with varying sucess.
Some pieces simply need a different view, however I have one that will not go away. The different view does really solve the problem either because I need the view with the problem. I have attached a picture of the issue, but it is just a chunk to protect information that I cannot share. The gray in the drawing is the part, the green line should not be there. The green line only shows up on the PDF, not in modeling space or paper space.
Is there a way to remove the extra sash lines which, in plan, are meant to represent the sash below the cut plane? I want to keep the sash "nub" at adjacent to the frame, but remove the lines which run parallel to the glass.
See attached pdf for detail of what I'm referring to.
When I use the built-in dwg to PDF for publishing multiable layout tabs I somtimes get extra and/or missing lines and objects on the PDF. When in model space no extra lines a present or missing. Everything is where it need to be. Same goes when a review the drawing in layout before I publish to PDF.
When I publish to paper its fine, no problems.
In my acaddoc.lsp I have it load an autoload.lsp file that contains many lisp routines (attached). I am getting the "extra right paren on input" error. It appears to error after the third line in the autoload file "san18"....I removed everything after the third line and no error, I put them back and it errors and only loads first three?
I am using Civil 3D 2014 and I have added all neccesary paths to the trusted locations.
i open a new picture i have to first ctr h to turn off the extra grid lines in order to view my pcitures , is there a way to turn off the extra grid lines permanently so i dont have to do it every time i open a new picture?
View 3 Replies View RelatedI often draw freehand onto a piece of paper and then scan the completed sketch, to change size and clean up sketch lines and then re print...I've recently tried pant.net and i was wondering if there is a tool that cleans up extra sketch lines? as most of my designs are basically tattoo designs, i need to make sure the lines and everything is perfect before taking them to a tattoo artist?
View 2 Replies View RelatedI am having problems with lines disappearing in a sketch randomly. I am in a small assembly, going in and out of sketches used for machining, and then the sketch lines and dimensions will all be gone when I enter a sketch. If I hover over the sketch in the browser I can see the lines highlighted, but when I remove my mouse the will disappear. I cannot interact with the lines or dimensions at all. If I draw a new line, it immediately disappears. I have tried changing some things in the view tab and settings but haven't had any luck.
View 7 Replies View RelatedI have just received an "Extra shadow error" and Xara deleted SO MUCH of my progress on my project. Why is this? How can I recover this? I just lost three sessions of labor. I'm going back to Pshop if this keeps happening. I can't afford these kinds of setbacks.
View 7 Replies View RelatedOpen SKS.iam which is suppose to be empty, but for some reason asks for the 14020-111.iam file. Once it opens go to the BOM and you will see 24 of the same part in the BOM. If you derive the SKS.iam you will see those 24 parts listed and you will even see them. Yet when you go back to the base SKS.iam they are not visible in the browser or the windows graphic area. IV 2012 sp2
View 8 Replies View RelatedInside of the Style& Standard Editor (Manage-> Style editor) we use ANSI and a Company standard created off of ANSI.
But when I choose the filter to ALL STYLES, I can see JIS, DIN, All other unwanted styles. How can I get rid of them?
Do you all have them too? How do you get rid of them if you dint use them?
C1
Inventor Professional 2013
Vault Collaboration 2013
I want to add a extra section on to the top of the Volute neck so i can keep a perfect shaped circle for the flange i will place on top.How can i add the extra section that retains the perfect circle and also flat across the top for a flange i will place on top..Using Inventor 2012
View 3 Replies View RelatedI have tried to do a lofted flange. It works, but there is an extra bend that I don't understand why it is there. The bends, I would assume, should be symmetrical but they are not. I have attached the part.
View 5 Replies View RelatedI am attempting to model an existing part as it is currently being manufactured a simple hopper, and am having an issue with a corner.
Look at the converging corner of the attached file.
How could this be done to avoid the problem? Or can it? 2010 Suite-SP4 64bit
I am populating iProperty "Description" field using expressions from the custom fields. These custom fields are exported from the parameters.
Is there a way of typing in extra plain text into the field onto the end of the expression without losing the expression formula?
Inventor 2010 Pro SP4, Vault Collaboration 2010
HP Z820 Xeon E5-2643 0 @ 3.3Ghz 16.0GB RAM
Nvidia Quadro 5000
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
I am new to Inventor after using Unigraphics for a while and finding the modelling side very similar so no problems there. the problems are starting when i am producing drawings.
I am trying to manually break a dimension extension line around an inserted symbol ( surface finish symbol) and can't figure this out. I have noticed that Inventor automatically break dimensions round other dimensions but is there a way to add a manual break?
Also is there a way to break a center-line round dimension text? i have added a picture with the problem.
This has been occuring since installing 2013 and it's not just on my computer, our other drafter has the same issue. Once it happens on one drawing it effects all open drawings and the only thing I have been able to do to get rid of it is to close out all drawings and restart AutoCAD. Attached is a screen shot since its' hard to describe.
View 2 Replies View RelatedWe are using a file created by another company and making additions to it for Interiors. While working in this file we have added some new layers and have begun to hatch new walls. While hatching some of these wall my boss received a message saying that the file had errors. He saved and closed the file at that point. When he re-opened the file a number of lines were missing from the file.
They appear to be completely random - i.e. parts of chairs are missing but not the whole chair, parts of walls but not whole walls. The things missing were not all on the same layer and were not necessarily items that had been hatched.
Note - we are running 2012 and the files were created in 2007
I am working on a 6 mile highway project whose surface file is 85MB big. So, I created a Data Shortcut of this surface and used this for creating profiles. However, at some locations the corridors go below the surface(as per their original profile) which was not intended. So, I need to restrict the surface to follow the corridors but not go beyond it.
I have created feature lines from corridors and tried to add them as breaklines to the surface. But " error adding breakline" error pops up.
Is it because I am trying to add the breaklines to the mirror surface which I created from Data Shortcut ??
Will it be useful if I copy feature lines to original surface file and add these feature lines as breaklines in that file??
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
I'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies View RelatedI was just editing a photo I had taken and I started to get lines. Different colour lines (red, pink, yellow, green etc).
View 1 Replies View RelatedI'm just trying to update a CS3 illustrator file to 5.5. I continually get the error 'an unknown error has occurred' when saving it. I've copied and pasted each item individually into a new file and then saved to eliminate what the problem is. What i've found is any lines drawn/used are causing the error. How do I fix this?
View 4 Replies View RelatedWhen converting metric 3d polylines to feature lines with units set on metric, drawing properties metric and using the australia/new zealand settings and command "create featureline from objects", for some reason the resulting 3d featurelines end up imperial?
View 2 Replies View RelatedHaving an issue with linetypes that are proprogating within all our drawings in our office... I have tried to purge, delete all and wblock and nothing seems to work. The only thing that I found to work is superpurge...
Junk is the drawing that I erased everything. (junk drawing is 2.6M with nothing in it...) click on this link to download... [URL]........
I wblocked out wblock drawing and the size fell but the file still has all the linetype...
If I draw something in wblock and copy clip it to another drawing then I get all the extra linetype from wblock dwg...
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.