Is there a way to remove the extra sash lines which, in plan, are meant to represent the sash below the cut plane? I want to keep the sash "nub" at adjacent to the frame, but remove the lines which run parallel to the glass.
See attached pdf for detail of what I'm referring to.
I am using 2013 and have a few 3D objects in the modeling space that I am using view base to put different views of each into the paper space. When I do this and export to PDF, I get an extra green line from the paper space. I have deleted and replaced the view and have tried different views with varying sucess.
Some pieces simply need a different view, however I have one that will not go away. The different view does really solve the problem either because I need the view with the problem. I have attached a picture of the issue, but it is just a chunk to protect information that I cannot share. The gray in the drawing is the part, the green line should not be there. The green line only shows up on the PDF, not in modeling space or paper space.
This repeats around 100 times in the command line when adding view port to a sheet. "ERROR: Could not generate sash area from window section profile. I'm using ACA 2013 on windows7 64bit. I've tried purging and audit but still happens. It wouldn't bother me except its taking for ever to wait for them to stop running in command line.
View 3 Replies View RelatedHad these lines show up in ACAD. I have to restart everything to get them to go away.
View 1 Replies View RelatedI have a problem in my ucs icon when i am drawing/rotating and dimensioning my drawing.. the ucs turns to have extra lines and even the dimensions has unnecessary lines. how am i suppose to fix this
View 2 Replies View RelatedWhen plotting any IDW files to our full size plotter, I have ghost lines running through the drawing (lines that are not present in the drawing, on screen or preview) alomost like the plotter is printing extra extension lines on the drawings, overlaying 2 sheets on 1 drawings and even moving some text on the drawings. I have all the SP's and am lost. I can move to another computer and print drawings fine so its not a plotter issue.
View 2 Replies View RelatedI have a 4" pipe tee that was imported to IV from a neutral format ( I don't remember which one. ) In the end view, there are always extra lines showing extending from the branch of the tee.
I can hide the lines, but that then hides the edge lines of a plate welded to the tee branch. Files are attached
Files and more information is already posted on MCADForums:
[URL]........
When I use the built-in dwg to PDF for publishing multiable layout tabs I somtimes get extra and/or missing lines and objects on the PDF. When in model space no extra lines a present or missing. Everything is where it need to be. Same goes when a review the drawing in layout before I publish to PDF.
When I publish to paper its fine, no problems.
First I was working in the white background when I did brush strokes to the typography.But i don't realize until I saved it for the png format that I was applying the brush strokes other than needed. Here the snapshot of the work.
Remove the white strokes from the blue background without deleting from that black letter!
How do I remove extra profiles from color mangement in Print Module?
View 2 Replies View RelatedHaving an issue with linetypes that are proprogating within all our drawings in our office... I have tried to purge, delete all and wblock and nothing seems to work. The only thing that I found to work is superpurge...
Junk is the drawing that I erased everything. (junk drawing is 2.6M with nothing in it...) click on this link to download... [URL]........
I wblocked out wblock drawing and the size fell but the file still has all the linetype...
If I draw something in wblock and copy clip it to another drawing then I get all the extra linetype from wblock dwg...
i open a new picture i have to first ctr h to turn off the extra grid lines in order to view my pcitures , is there a way to turn off the extra grid lines permanently so i dont have to do it every time i open a new picture?
View 3 Replies View RelatedI often draw freehand onto a piece of paper and then scan the completed sketch, to change size and clean up sketch lines and then re print...I've recently tried pant.net and i was wondering if there is a tool that cleans up extra sketch lines? as most of my designs are basically tattoo designs, i need to make sure the lines and everything is perfect before taking them to a tattoo artist?
View 2 Replies View RelatedI recently installed the SketchUp plugin in the hope that I would be able to easily and effectively transfer SketchUp models into AutoCAD and subsequently into Revit.
However, upon importing the SketchUp model, extra wireframe is added to the flat surfaces from vertex to vertex. This does not affect the CAD model as such as it appears that these lines are necessary for CAD to create the surfaces.
Though when imported into Revit from CAD, these surfaces are unable to be processed and the model becomes incomplete, also failing to identify the windows and doors that had been previously identified as the model had been taken from Revit, through CAD and to SketchUp with no problems and then all the way back again.
What is the next step of importing it back to Revit as I am unsure how to retain its levels (i.e Floor plans).
With QP activated, if I select an object (say an alignment or profile view) on the screen and want to pick its GRIP, I have to click the screen FIRST to get focus back to the drawing window (so two clicks). The same applies to the contextual Ribbon, it takes two clicks to 'press' a ribbon button if QP is activated.
View 9 Replies View RelatedThis repeats around 100 times in the command line when adding view port to a sheet. "ERROR: Could not generate sash area from window section profile. I'm using ACA 2013 on windows7 64bit. I've tried purging and audit but still happens. It wouldn't bother me except its taking for ever to wait for them to stop running in command line.
View 4 Replies View RelatedHow do I make a corner sash (flash) with Avalable Now! text along it. It would also be nice if it had a bit of a wiggle in it to make it look a bit more realistic.
The poster is 2 x 3 feet.
how to remove the guide lines or lines? Those are annoying when you are in Realistic View. As far as i remember there are commands to remove those lines. It is Display Silhowettes "dispsilh", but when i'm using this command it's still there. I currently using CAD Ver. 2007.
View 4 Replies View RelatedHow to change the color of the sash in this photo from red to blue.
The biggest problem is how to change the color the sash is partially covered with the girl's hair.
I'm trying to plot a 3D object but can't remove the hidden lines. On typing "hide" they are removed and appear removed in the plot preview but they still appear in the hard copy.
View 1 Replies View RelatedI cant seem to get the clean command to do anything, it asks whether i want
[Imprint/seParate solids/Shell/cLean/Check/Undo/eXit]
so i type "L"
it says select object
i click the solid
it says [Imprint/seParate solids/Shell/cLean/Check/Undo/eXit] again...
Okay. So our designer is using autocad 2013. He is using a pc and he is sending me the files (i'm on a mac) and the thinest lines do not show or print. But, they print/show on a pc! I need to be able to print these. I've searched the web and found nothing.
View 3 Replies View RelatedAs far as I know there is no way to add or remove vertices on contour label lines. Is this correct?
If so it's another one for my wish list.
Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]....
am used to using autocad 2010, i am using 2013 now and i cant figure out how negative extrude so to speak, if i extrude too far, how do i remove the end of the extrusion?
View 1 Replies View RelatedI have done this already but for the life of me I just cant remember how I did it (it was just so easy!!!) and i cant find it in answers either.
View 2 Replies View Relatedi am doing up some old photos and can remove scratches and the like quite easiely,but i have lines running through them that i cannot remove.
View 2 Replies View RelatedI am working with a digitized land use image that classifies land use by color. Land use is also divided by black lines that are about 10 pixels in width. I would like to remove these black lines so that land type changes are represented only by color change. What is the best way to remove the black lines?
View 3 Replies View Relatedhow to remove the blue lines? these are rulers lines..
View 3 Replies View RelatedHow do you remove the grid lines in VS X4 Pro? I could not find anything under preferences or a switch near the preview window.
View 4 Replies View RelatedI'm using revit for my college projects.. When I edit an in placed mass I see these dimension texts, i could use guidance on how to hide these... this started happening today
View 2 Replies View RelatedMy digital camera takes pictures with lines across the picture is there any good way to remove them???
These were originally straight lines but I applied a transformation on the picture to make the picture frame I took a picture of a perfect rectangle...