AutoCAD Architecture :: ERROR Could Not Generate Sash Area From Window Section Profile

Nov 21, 2013

This repeats around 100 times in the command line when adding view port to a sheet. "ERROR: Could not generate sash area from window section profile. I'm using ACA 2013 on windows7 64bit. I've tried purging and audit but still happens. It wouldn't bother me except its taking for ever to wait for them to stop running in command line.

View 4 Replies


ADVERTISEMENT

AutoCAD 2013 :: Error Could Not Generate Sash Area From Window Section Profile

Nov 20, 2013

This repeats around 100 times in the command line when adding view port to a sheet. "ERROR: Could not generate sash area from window section profile. I'm using ACA 2013 on windows7 64bit. I've tried purging and audit but still happens. It wouldn't bother me except its taking for ever to wait for them to stop running in command line.

View 3 Replies View Related

AutoCAD Architecture :: Desktop 2012 Section Error Message?

Apr 26, 2013

When trying to cut a section in ADT 2012 I get the following message:

Command: _AecVerticalSection

Command not allowed because drawing contains objects from a newer version of this application.

How can i get ADT 2012 to cut the section i need?

View 2 Replies View Related

Illustrator :: Not Enough Room In Window - Increase Document Area Error

Apr 26, 2012

I closed a document in AI CS5. Now when I try to reopen it, I get an error message about there not being enough room in the window, increase document area. How do I do that since I can't get the file opened? Am I doomed to having a file that can no longer be opened?

View 5 Replies View Related

AutoCAD Architecture :: How To Cut A Section And Create A Section View

Nov 3, 2012

So, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us.  so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.

View 6 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Generate 2D Gear Profile?

Mar 4, 2013

As I mentioned above,I am here by attaching an Autolisp program to generate a 2d gear profile in autocad.

View 5 Replies View Related

AutoCAD Architecture :: Raised Decking Profile / Create A Profile / Wall Style

Oct 9, 2011

I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.

View 1 Replies View Related

AutoCAD Architecture :: Transferring Tool Palettes From One Profile To Another Profile

Feb 7, 2012

I want to transfer or copy the tool palettes (walls, doors, FFE) from one profile to another. I have all my tool bars, set in one profile correctly, but all the tool palettes are in another profile.

Is there a way to copy these tools into another profile? Even if I over-right another palette?

View 6 Replies View Related

AutoCAD Architecture :: Generate Space Recognize Columns?

Dec 18, 2012

Why doesn't generate space recognise columns?????

View 2 Replies View Related

AutoCAD Architecture :: Generate Roofs Based On Plines

Dec 10, 2012

Is there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.

View 9 Replies View Related

Photoshop :: Checkbox Or Similar For Transparent PSD File To Generate Whole Canvas Area

Oct 4, 2013

Photoshop generator nice to have features for future roll-out would be: Check box or similar for transparent PSD file to generate the whole canvas area, not just the image area.The ability to generate to a specific folder, including on a networked drive within a shared environment.Ability to generate to no folder at all, place in the same location that the PSD file is located Ability to generate an animated GIF.

View 2 Replies View Related

Photoshop :: How To Generate Color Profile For Mobile Devices

Nov 18, 2012

I have a hardware/software monitor calibrator to calibrate my desktop PC monitor for Photoshop work. However, when I transfer these photos to my phone, they display with an ugly color tint.
 
Is there anyway to display photos correctly on a cellphone or tablet that cannot be calibrated? In theory, it should be possible to generate a color profile for the phone/tablet and store the profile on a PC. Then I can convert photos to this color profile in Photoshop before transferring to the phone/tablet.

View 2 Replies View Related

AutoCAD Civil 3D :: 2D Area Of Cross Section?

Feb 15, 2013

I have a cross section view with a canal section and a flat water surface section.

Is there a way for C3D to calculate the 2D area of the canal section that is under the water elevation?

Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760

View 9 Replies View Related

AutoCAD Civil 3D :: Section View Print Area

Aug 8, 2012

When creating section view sheets how do I control where the section view is in relation to the print area.  I understand I can use the data bands to force the sections left and right but what about vertically?  I end up with sections drawn right on the line and the labels are outside the print area, see below.

View 3 Replies View Related

AutoCad :: Get Typical Wetroom / Wet Area Details In Section?

Jul 9, 2012

Where I could get typical wetroom/ wet area details in section?

View 5 Replies View Related

AutoCAD Inventor :: Display Area For Drawing Section In Text Box

Oct 17, 2011

How do I calculate the area for a section of an extruded profile and display it in a drawing note?  I see how to add a field <AREA> in the text dialog box, but it comes up as N/A in my text box in the drawing.  This is also the case for <MASS> and <VOLUME>.  How do I get the drawing fields associated with the physical properties of the model?

View 2 Replies View Related

AutoCAD Civil 3D :: Insert Area Details In Cross Section?

Aug 17, 2013

How can I insert area Details in civil 3d cross section?

View 1 Replies View Related

AutoCAD Civil 3D :: Corridor At Gore Area With Tunnel Cross Section

Jan 28, 2013

At entry / exit ramp connection,
 
Since frequencies of corridors are perpendicular to their respective alignments, there is gap developed in between two corridors on ramp as shown in snaps.
 
This is common problem in roads & highways, I know how fix the same.
 
But if my cross section is a Tunnel? (Cross Section- Elliptical Roof)
 
Civil 3D 2012, SAC
16 GB Ram 64 Bit Win7

View 3 Replies View Related

AutoCad 3D :: Section Profile Through Topographical Survey

May 20, 2012

I have a 3d topographic survey and need to cut sections at various locations.Having worked with 3d models before, my idea was to use the section plain tool, but as this 3d topographical survey is made up of plines I am unable to do that.

I have seen that Autocad 3d civils has a number of fancy tools to do what I require but I am working with plain old Autocad 2010.

View 1 Replies View Related

AutoCAD .NET :: Double Click On Stretch Grip Of Dynamic Block Generate Fatal Error

Aug 7, 2011

I have this double click class. which works fine. In order  to clear grips after user finishes with double clicking,I  added  two lines (which shown on code below).  But having those two line make code faulty. When ?

if user select a dynamic block with stretch grip on it, then double click on stretch grip trianlge. code geneaarte fatal error. Funny thing is code doesn't catch. it. Is there any other way to clear grips after double click ?

Here is code:

Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.DatabaseServicesPublic Class Main_0_Class Implements IExtensionApplication Public Sub Initialize() Implements IExtensionApplication.Initialize dblClickEven_Class.Start() End Sub
[Code] .....

View 7 Replies View Related

AutoCAD Inventor :: IPart Workflow And Vault - Generate All Or Generate Only New

Sep 4, 2012

We are using iPart - iAssembly workflow with Inv-2013 and  Vault Basic 2013

My question is related to released state of iparts. Currently we are generating/ releasing

all the iparts when new member is added in order to manintain the parent child version relationship

Example  : say i have a ipart 41020.ipt and i have members 41020- 001 ~ 008 . I check out the parent

from Vault and add 009 member to it.

Question :

Do I have to generate all and check those in to maintain the version relationship between the child and parent inside

Vault 2013 ?
 Or
Only generating 009 will maintain version relationship inside Vault 2013

Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013

View 4 Replies View Related

AutoCAD 2013 :: Remove The Extra Sash Lines

Nov 11, 2013

Is there a way to remove the extra sash lines which, in plan, are meant to represent the sash below the cut plane? I want to keep the sash "nub" at adjacent to the frame, but remove the lines which run parallel to the glass.

See attached pdf for detail of what I'm referring to.

View 6 Replies View Related

AutoCAD Inventor :: Select Profile For Sweep In Section View

May 23, 2012

I am trying to perform a sweep of a profile and I am unable to select the profile. I have a part with a plane through the part. I created a profile on this plane that I want to sweep along my path. However whenever I try to select the profile I am unable to, even when I sectioned the part to the created plane.

View 2 Replies View Related

AutoCAD Civil 3D :: Create A Profile Or Section Using Network Surface?

Mar 27, 2013

I have in front of me a survey of a small section of road (it's only 10m x10m or something). I want to be able to create a profile along the road section to demonstrate the surface level changes. I have created a network surface but Civ3D doesn't seem to able to use this type of surface to create a profile. Is there anything I can do, perhaps a way of transforming the network surface into another type of surface? Or am I going to have to manually create this profile in ACAD!

View 7 Replies View Related

AutoCAD Civil 3D :: End Section For Profile That Adjusts To Pipe Size?

Jul 23, 2013

Any end section profile style that adjusts to the attached pipe size.  I have been trying for days to create this style and I cannot get it to work. 

View 2 Replies View Related

AutoCAD Civil 3D :: How To Bring In Finished Road Section On Longitudinal Profile

Sep 28, 2013

How to bring in the Finished Road Section on a longitudinal profile @ point on tie in. For example three road A, B and C are tieing in to Road X at different stations. I have profile of all the roads. and I want to change the profile of road X with reference to road A,B and C. for that I need reference road section of Road A,B and C on longitudinal profile of road X. How this can be achieved.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Make Flared End Section Slope In Profile View

Jan 27, 2010

How to make the flared end sections have the same slope as the pipes they are connected to in the profile view?

View 9 Replies View Related

AutoCAD Civil 3D :: What Type Of Objects Can Be Projected Into Profile Or Section View

Dec 13, 2012

What type of objects can be projected into a profile view?  I know that points, feature lines, and multiview blocks can be projected with variable results.  I can't even find a simple list within Civil 3D's.

-Civil 3D 2012
Fred
-Civil 3D 2013 sp2
-Windows 7 64-bit
-Intel i7 Dual Core with 2.40 GHz
-8 GB of RAM
-AMD Radeon HD 6770M
-Civil 3D user since 2007

View 9 Replies View Related

AutoCAD Civil 3D :: Transport The Static Section Information To The Surface And Profile?

Dec 12, 2013

I've to put the sections on static mode on my project 'cuz the surface corridor won't creating right, can i transport the informations of the static section to the surface and profile? Basically i'm trying to change the informations on the static section and actualizing my surface and profile using the section changes

View 3 Replies View Related

AutoCAD Civil 3D :: Project One Feature Line To Section Group Or Profile?

Aug 29, 2012

Is there a way to project just one feature line (or anything appropiate...polyline, 3d poly etc) into the sections group or profiles ?

The thing is that Projection tool, labels everything that's a Block, Point, 3d poly ...etc to the sections group.

And it puts all labels in the same layer.

My project theme requires to project forest limit on every section. This is appearing on the survey as a polyline along the road. Civil Engineer / Infrastructure of metropolitan transports [URL]

View 4 Replies View Related

AutoCAD Civil 3D :: Calculate AREA Of Cut And Fill Between Alignment And Surface Profile?

Aug 18, 2013

How to calculate the AREA of cut and fill analogous to the volume of cut and fill between surfaces, but instead only between the alignment and the road profile in the prolfile view. From what I've read of similar posts a few people have had the same question but have been instructed how to do it with volumes as opposed to area. Also how to insert a table of cut and fill area analogous to the one you can inset from the volumes dashboard.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved