AutoCAD Civil 3D :: Create A Profile Or Section Using Network Surface?

Mar 27, 2013

I have in front of me a survey of a small section of road (it's only 10m x10m or something). I want to be able to create a profile along the road section to demonstrate the surface level changes. I have created a network surface but Civ3D doesn't seem to able to use this type of surface to create a profile. Is there anything I can do, perhaps a way of transforming the network surface into another type of surface? Or am I going to have to manually create this profile in ACAD!

View 7 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Transport The Static Section Information To The Surface And Profile?

Dec 12, 2013

I've to put the sections on static mode on my project 'cuz the surface corridor won't creating right, can i transport the informations of the static section to the surface and profile? Basically i'm trying to change the informations on the static section and actualizing my surface and profile using the section changes

View 3 Replies View Related

AutoCAD Civil 3D :: Create Proposed Profile From Surface Profile

Mar 17, 2011

We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.

I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.

My questions:

1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile?  If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1.  If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline. 

2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?

View 9 Replies View Related

AutoCAD Civil 3D :: Export To LandXML From Create Surface Profile

May 8, 2012

We are using Civil 3d 2012 with Topcon Data Collectors.  Topcon will not read a profile created by using "create surface profile" command but it will read a profile using "Profile Creation Tools" command. We are not sure if this a civil 3D, Topcon or a LandXML issue? 

View 1 Replies View Related

AutoCAD Civil 3D :: Creating Profile Bandsets With More Than 2 Profile / Surface Elevations Shown

Mar 14, 2013

Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.

<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>

Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band

My questions are as follows

1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it? 

2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch

3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .

View 3 Replies View Related

AutoCAD Civil 3D :: Proposed Profile And Existing Surface Not Showing In Profile

Jun 17, 2013

I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.

View 3 Replies View Related

AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View

Nov 28, 2012

Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir  shoreline. 

1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing. 

2.the points having higher elevation are the  top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.

3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir. 

View 2 Replies View Related

AutoCAD Civil 3D :: Network Traffic For Section View Move?

May 8, 2012

I'm still having performance issues in 2012. Thought that going 64bit 8gb ram. It seems like anytime I do anything in C3D, network traffic is generated, and I'm dead in the water until the traffic terminates.

network traffic generated with moving a section view twice. While on the "plateau", I have a busy cursor. As soon as the traffic drops down, I can start working again. Why would moving a section view generate network traffic?

View 6 Replies View Related

AutoCAD Civil 3D :: Add Network Parts To The Profile

Jan 19, 2010

I am using Civil 3D 2010 & getting an error message when I run the command (AddNetworkPartsToProf) to add network parts to the profile.

Here is the message I get when I select a part of the pipe network to draw into the profile. "1 object was of the wrong type. All objects in the pickfirst set were filtered out, please select again".

View 8 Replies View Related

AutoCAD Civil 3D :: Road Network Surface

Nov 19, 2012

I have make a road network. Then i make a corridor surface using corridor extends as outside boundary. I also create a boundary in the interior side of the roads with interactively tool, and i use it as a hide boundary. The corridor surface look fine but when i am trying to make a finish Ground Surface pasting the corridor surface after Existing Ground surface then the hide boundary of corridor surface make holes in finish Ground surface.

View 3 Replies View Related

AutoCAD Civil 3D :: Pipe Network Cross Section Labels In 2012?

Dec 29, 2011

In 2011 the pipe network cross section labels had to be exploded or they would disappear once you closed the drawing (even with saving).

In 2012 can you close and open a drawing and have the labels not disappear?

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 3 Replies View Related

AutoCAD Civil 3D :: Pipe Network Won't Show Up In Profile?

May 15, 2012

I am using civil 3d 2012. 

I have a network that I showed in a profile view and, to creat my proposed pipes network I simply copied the pipes and structures and used network split.

Now I have two networks, but when I project those pipes and structures into a profile they are not visible. 

If I check the profile view properties and look at the pipe networks tab, all the pipes are shown as drawn.

View 7 Replies View Related

AutoCAD Civil 3D :: Profile Pipe Network Labels

Jun 19, 2013

If I have a pipe that spans between two profile views, is there a way to label the pipe in each profile view with only the lineal feet that is showing in that profile view?

View 4 Replies View Related

AutoCAD Civil 3D :: Pipe Network Profile Views

Mar 12, 2012

I am using C3D 2012.

I have a storm water pipe network and a sanitary pipe network. In the profile view I am displaying both networks. My question is in the profile view the storm pipes are in "front/foreground" of the sanitary pipes. Is there a way to "trim" out the sanitary pipe profile lines where they pass behind the storm sewer.

Kind of like a display order so looking at the profile I can tell which pipe and in foreground and which are in the back ground.

View 3 Replies View Related

AutoCAD Civil 3D :: Pipe Network -> Profile Label Placement

Aug 5, 2013

Civil 3D 2013, SP2

Settings > Pipe Network > Right Click > Edit Feature Settings > Default Profile Label Placement, gets you to this point:

Does the highlighted line only apply at the time that the label is placed?  I have multiple sewers to label and I want to each set of labels at a different elevation. Changing this default will have NO effect on existing labels?

View 3 Replies View Related

AutoCAD Civil 3D :: Display Coordinates In Profile For Pipe Network

Jan 8, 2014

I can create labels to display stationing in a profile, but is there a way to display the coordinates in the profile instead? When I need to move my pipes I am using the station I get from the profile label and then use grip move. If I could get the N, E, I could just type it in on the Vista table.

AutoCAD Civil 3D 2012 SP4
Windows 7 (64)

View 4 Replies View Related

AutoCAD Civil 3D :: Pressure Network - Don't Follow Surface Anymore

Jan 31, 2013

So, I really like the ability to have a pressure network pipe follow a surface but, what if I no longer want the pipe to follow the surface? Is there any way I can get rid of all the extra grips that are added to the pipe in the profile? The only way thing I've come up with is to delete the pipe and recreate it.

View 1 Replies View Related

AutoCAD Civil 3D :: Can't Change Reference Surface For Pipe Network

Sep 4, 2013

Civil 3D data shortcuts. 

So I first created a drawing which included a surface called "CONTOURS" and an existing sewer pipe network. I then created a data shortcut of the existing sewer network and started a new drawing with a proposed sewer pipe network.

When I received better contour data, I created a new "10FT EXIST CONTOURS" surface in the existing sewer drawing and switched the reference surface for the existing sewer structures and pipes to the new "10FT EXIST CONTOURS" surface. And of course I deleted the old "CONTOURS" surface because I no longer needed it. 

Now, the part that makes me want to pull all my hair out! When I open the proposed sewer drawing I get all the error messages that "Reference surface 'CONTOURS' not found in reference drawing" for all 22 of the existing sewer structures.

I've tried deleted the existing sewer network in the proposed sewer drawing and recreating the data shortcut but nothing makes the errors go away. Is there any other way the existing sewer structures could be referencing the deleted surface that I have not thought about? How to get the error messages to clear?

View 7 Replies View Related

AutoCAD Civil 3D :: Pipes - Label Entire Network Profile / Want Crossings Only

Dec 5, 2012

I have pipe crossings shown in my profile.  Only crossings (NO PROJECTIONS).  So many elipises.  I want to label them.  Setting the label style at the pipe network does not work (will not override whatever label style was assigned at the pipe creation).  I have accepted this (although it sucks).

Now, to get around it, I go Pipe>Add Label>Add Pipe Network Label.  Label type is "Entire Network Profile".  When I do this, it labels not only the crossings but all projections.  So I have a million labels chilling out in space, where I have no crossing.

View 1 Replies View Related

AutoCAD Civil 3D :: 2014 - Pipe Network Structure Profile Label

Jul 30, 2013

Water main pipe network profile labels for structures do not attach to the structure properly in C3D 2014 (this same label style works fine in all previous versions of the software, through the 2013 release). The labels come into the drawing at a northing of 0 rather than attaching to the structure itself. However, if you grip edit and reset the labels, they reset to their correct attachment point. Additionally, if you attempt to grip edit the profile labels with Ortho mode on, it moves the label back to a northing of 0. I've created a new block for the structure, but that does not resolve the issue.

I've included a link to a Chronicle video that demonstrates the label behavior. [URL] .......

View 3 Replies View Related

AutoCAD Civil 3D :: Pipe Network - Crescent Road - Profile View

Jul 30, 2011

If I have a Crescent Road (P - shape) where the Alignment returns to itself, when i draw pipe network parts in profile, the pipe network gets drawn wrong, ie. the tie-in structure at the intersection is drawn at the wrong station.

My understanding is that the structures will get drawn at the station closest perpendicularly to the alignment, so the structure is going to the end station as opposed to the beginning simply because the end segment of the alignment is closer.

Is there any way to make a structure use a different perpendicular station (without shortening the alignment)?I don't want to move alignment or structure.

View 8 Replies View Related

AutoCAD Civil 3D :: Pipe Network - Profile Sump Display Incorrect

Dec 2, 2010

I am having problems with the display of my structures in a profile view.  Previously, when I change the inverts of the pipes connected to my structure it would automatically adjust the bottom (sump) of the box invert to match my lowest pipe.  However, for some reason it has stopped doing it and is now displaying the sump invert incorrectly.  I have my style set to "Display as a Boundary".  I have edited the structure sump to be by both elevation and depth, but it does not update the sump elevation.  I have tried to grip edit the sump but it seems to be locked at a certain elevation.  I have a profile with 10+ structures and they are all at multiple depths.  I realize there are minimum depths allowed by the structure, but I have exceeded the minimum depths in all cases.  Attached is an image that depicts my problem.  No matter what I do to change the depth it stays locked at a certain elevation.

Civil 3D 2011, SP1

View 9 Replies View Related

AutoCAD Civil 3D :: Change Pipe Network Reference Alignment Or Surface

Dec 14, 2009

I want to change the reference surface for a pipe network with existing pipes and structures. however the changes will only affect new objects, I have to manually change the others one by one. Even with the vista open I can select multiple structures, but when I click in the reference surface column of one of the selected structures, all the others are deselected.

View 6 Replies View Related

AutoCAD Civil 3D :: Pipe Network Move Multiple Manholes To New Surface?

Apr 19, 2013

Just as the topic says. I have about 40 manholes referenced to a surface that has no changed and I need to update them. I can go thru one by one and pick "structure properties" and change the surface. I did change the surface under the network options, but they all still reference the old surface.

View 4 Replies View Related

AutoCAD Civil 3D :: Adding Pipe Network Invert Line To Profile View

Mar 2, 2012

We have a big piping job coming up and as Civil3d still lacks some of the labelling abilities we want in the profile view bands. I am updating some old vba that adds a profile line of the invert of a pipe network to a profile view effectively tracing along the bottom of the network like I know a lot of people do by hand.

My original code works on assuming that the start and end structure are at the start and end of the alignment in the revised code I want to allow for situations where this is not the case.

Leading to my question is there and easy way to find the distance a profile view part is drawn along the parent alignment or do I have  look at writing my own function possibly extracting a polyline from the alignment and finding the distance using intersectionwith and distancefrom functions with the structure.

View 2 Replies View Related

AutoCAD Civil 3D :: Add Assign Pipe Network To Profile View Band In 2011

Mar 21, 2013

I'm trying to add assign a Pipe Network to a profile view Band in Civil 3D 2011. I was using COM to add profiles to bands because I couldn't figure out how to do it in .NET. But when it comes to pipe networks I don't see how you can do that with COM. How the .NET implementation is supposed to work? Here's the code I have that works for COM, except for the pipe networks. I essentially need to assign the correct pipe network to the band.
 
public static void AddProfileToBand(this ProfileView profileView, ObjectId profObjId, List<BandItemInfo> bandStyleInfosFromSet, ObjectId profileBandSetId){
using (Transaction tr = Application.DocumentManager.MdiActiveDocument.TransactionManager.StartTransaction())

[code]....

View 1 Replies View Related

AutoCAD Civil 3D :: Plan Production - Pipe Network Profile Labels Are Missing In Sheets

May 6, 2012

In plan production, I have created the sheets (plan & profile) as a seperate drawing. 

when I open the sheets, the pipe network profile labels are missing in model & paper space. (attachment 01)

I tried to on/off the annotation visibility tabs in the lower right corner (attachement 03)

Note: While creating the sheets, I select the tabs for pipe network & copy pipe network labels to destination drawings (attachment 02).

View 2 Replies View Related

AutoCAD Civil 3D :: Created Profile From File But Cannot Create Profile Report

Jan 17, 2012

I am working C3D 2012.  I have a proposed alignment and profile design by another firm that I had to tranfer into C3D.    I had no problem getting the horizontal alignment to display from a text file.  I tried to do the same with the profile by using the 'create a text file and create the profile from file' command.  I got the POB, PI's, and POE to display.  I then defined the VC.  I wanted to verifiy that the profile was indeed accurate compared to what we were provided.  So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".

I know the Proposed profile is indeed set to proposed in the properties.  I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.

Is there a way to convert this profile to be recognized as a FG profile?

Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit

View 9 Replies View Related

AutoCAD Civil 3D :: Labeling Surface Section

Oct 8, 2013

I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.

Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.

We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.

View 8 Replies View Related

AutoCAD Civil 3D :: Create Dynamic EOP Profile Based On Cross Slope From Center Line Profile

Jun 28, 2012

The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline.  Well the intersection tool doesn't always work with funky intersection layouts.  Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?

Civil 3D 2012
Windows 7, 64 bit

View 1 Replies View Related

AutoCAD Civil 3D :: Create Cut Fill Surface From Existing Surface

Mar 1, 2013

Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.

The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.

I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.

1. Novapoint is quite unstable and crashes alot

2. You cant create profiles out of 3d faces

3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface

4. A large surface made out of 3d-faces demands alot of computer power 

So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved