AutoCAD Visual LISP / AutoLISP :: Generate 2D Gear Profile?
Mar 4, 2013As I mentioned above,I am here by attaching an Autolisp program to generate a 2d gear profile in autocad.
View 5 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Start Profile Over From Scratch
Jan 17, 2013ACAD 2009 on XP
Third party software installed which now causes AutoCAD 2009 to crash when a single key is pressed. We have uninstalled the software, however the editor is still looking for the
Non-existent ARX. This is the problem. What file or registry key declares the list as shown in APPLOAD? I have verified 2009 works in the administrator profile.
We also did a repair and then a reinstall of 2009 to no avail. What steps are needed for AutoCAD to build a profile when a previous profile existed?
AutoCAD Visual LISP / AutoLISP :: Line Profile And Chainage
Mar 18, 2011Any lisp programme for creating a line profile and chainage. I have attached a sample drawing. The blocks on the line have elevation and lines are drawn from the datum .If i manually draw it will take too much time.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Change Profile Through Registry Settings
Jun 26, 2012I'm trying to fix my profile via lisp-registry key. Why? Because the profile we use is part of a plug-in meaning we can do it using our profile so I alternatively the answer is to tweak the one supplied as part of the plug in.
The method I’m familiar with is to edit using the following code as example;
(vl-registry-write "HKEY_CLASSES_ROOT\.PEN\Shell\open\command" "" "notepad.exe %1")
However that’s for creating a new registry key entry the one I have already exists but needs to be modified, better yet the profiles name (*.arg file) can change with updates, so in my search I came across the following link.
[URL]
Now I cant put it together and am not sure where I have gone wrong…(See code bellow)
(vl-registry-write "hkcu "\Profiles\" (getvar 'cprofile) "\General\DefaultConfig" "\\DCMAR02\A03P20")
AutoCAD Visual LISP / AutoLISP :: Getting Station And Elevation From Profile View?
Mar 22, 2013can i use the "methods supported" " FindXYAtStationAndElevation" to retrieve a elevation and station from a profile view?
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Registry Key For Current Profile (cprofile)
May 30, 2013Which registry Key stores the name of the Current profile ("cprofile")?
I tried following, all reurn 'nil'
(vl-registry-read "HKEY_CURRENT_USER\Software\Autodesk\AutoCADR18.1\ACAD-9005:409\Profiles")
(vl-registry-read
"HKEY_CURRENT_USER\Software\Autodesk\AutoCADR18.1\ACAD-9005:409\Profiles\(default)")
In the registry when I double-click the key, the value is displayed. But I can't access it.
AutoCAD Visual LISP / AutoLISP :: Odd Shape From Solid With Profile Of Polyline
May 16, 2012Any routine that would allow you to cut out an odd shape from a solid with the profile of a polyline?The goal would be to have all the pieces that are left, not subtract them out..
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Lost Profile Missing Images In Palette?
Sep 27, 2012I recently lost my windows autocad profile and i am having to start redoing the auatocad laout from scratch. I have the xtp file for the palettes which have loaded the images in ok, however there are some palettes which have not "linked" with the images in the image folder. How to reassign every single image to the item in the palette?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Continuous Dimension Lisp That Alternate Its Position
Jul 12, 2012Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
AutoCAD Visual LISP / AutoLISP :: Add String To Each Item In List Using Lisp
Nov 14, 2013I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Opening Drawings With Default Visual Style Set To 2D Wireframe
Oct 7, 2013Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
AutoCAD Visual LISP / AutoLISP :: Write A Lisp Routine That Invoke The Mleader Command
Oct 11, 2012I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
AutoCAD Visual LISP / AutoLISP :: Visual Effect Settings?
Jun 20, 2013Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Combinations In DCL?
Sep 7, 2012Is it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
AutoCAD Visual LISP / AutoLISP :: Get Attribute Value
Jun 3, 2013I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Nil At The End Of Command
Jun 22, 2012I have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: 3D Point From X And Y?
Oct 9, 2013I'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
AutoCAD Visual LISP / AutoLISP :: Put Point At Each End Of Arc?
Dec 19, 2011What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
AutoCAD Visual LISP / AutoLISP :: Get The Value Of Attribute
Dec 30, 2011Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
AutoCAD Visual LISP / AutoLISP :: Use Of The Alt Key In A Macro
May 29, 2013I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
AutoCAD Visual LISP / AutoLISP :: Toggle Between PS And MS
Nov 8, 2011I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
AutoCAD Visual LISP / AutoLISP :: DOS DIR Command
Oct 27, 2012I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
AutoCAD Visual LISP / AutoLISP :: Get Z Value From Text
May 10, 2012I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
AutoCAD Visual LISP / AutoLISP :: What Is Dot Net Equivalent
Oct 17, 2011the following returns true since the @ symbol tests for an alpha character.. (wcmatch "S101" "@*").What is the Dot Net equivalent?
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To End Application
Jul 10, 2012Is there a command that is the opposite of starting an application to open up a file? Like:
(startapp "PlaySound.exe" (findfile "CuckooClock.wav"))
Instead of starting an application, how to shut all of its instances down. Let’s say I have iTunes and/or Internet Explorer w/ a few tabs open and I can close them down without getting to the application to terminate it the usual way.
Naturally,
(endapp "iTunes.exe") doesn’t work :-))
AutoCAD Visual LISP / AutoLISP :: Can't Get While Command Right?
Apr 13, 2012I am trying to get my original layer and lintype reinstated after the user is finished with the pline..I know Im suppose to use the while command but am now completely lost on which way to do this
(DEFUN c:TEST1 ()(if (not (tblsearch "LTYPE" "MYWC")) (command "-linetype" "LOAD" "MYWC" "C:/COUNTER.LIN" ""));SECOND PROGRAM...;CREATE CORESPONDING LAYER...(command "._Layer" "Make" "WC LEIDING" "Ltype" "Continuous" "" "Color" "211" "" "")(SETQ MYOLDCELTYPE (GETVAR "CELTYPE"))(SETVAR "CELTYPE" "MYWC")(while (PROGN(COMMAND "pline")(SETVAR "CELTYPE" MYOLDCELTYPE)))
AutoCAD Visual LISP / AutoLISP :: Z Value For Points?
Jan 5, 2012I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.
View 7 Replies View RelatedAutoCad :: How To Draw Helical Gear Tooth Profile
Jul 8, 2012I want to draw helical gear in autocad 2010. How to draw helical gear tooth frofile in autocad.
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Pline Dimensioning
Sep 2, 2005I am looking for an AutoLISP routine, which gives all aligned dimensions of a closed polyline, drawn in 3d.
I have attached a 2D drawing for reference.
AutoCAD Visual LISP / AutoLISP :: Return Name Of Different Folders?
May 15, 2013The following gives me the first folder string, with no back-slashes, that the drawing exists in.
(setq FirstFolder
((lambda (/ tmpDir tmpPos)
(substr
(setq tmpDir (getvar "dwgprefix"))
(+ 2 (setq tmpPos (vl-string-search "\" tmpDir)))
(- (vl-string-search "\" tmpDir (1+ tmpPos)) (1+ tmpPos))))))
Is there a way to find the name of the second folder?
Is there a way to find the name of the third folder?
The string length of the characters for each of the first, second, third (and so on) folders are different, which means I can't count character using the "substr" function.
AutoCAD Visual LISP / AutoLISP :: Sorting A List
Aug 17, 2012I have a list that contains data like this,
"Tree-01-08-AA5"
"Tree-04-12-QV"
"Tree-10-30-QS"
How would I go about sorting this list by AA5, QV, QS? I know how to use vl-sort and reverse, but I do not understand how I would go about this.