Any lisp programme for creating a line profile and chainage. I have attached a sample drawing. The blocks on the line have elevation and lines are drawn from the datum .If i manually draw it will take too much time.
View 9 RepliesI'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedACAD 2009 on XP
Third party software installed which now causes AutoCAD 2009 to crash when a single key is pressed. We have uninstalled the software, however the editor is still looking for the
Non-existent ARX. This is the problem. What file or registry key declares the list as shown in APPLOAD? I have verified 2009 works in the administrator profile.
We also did a repair and then a reinstall of 2009 to no avail. What steps are needed for AutoCAD to build a profile when a previous profile existed?
As I mentioned above,I am here by attaching an Autolisp program to generate a 2d gear profile in autocad.
View 5 Replies View RelatedI'm trying to fix my profile via lisp-registry key. Why? Because the profile we use is part of a plug-in meaning we can do it using our profile so I alternatively the answer is to tweak the one supplied as part of the plug in.
The method I’m familiar with is to edit using the following code as example;
(vl-registry-write "HKEY_CLASSES_ROOT\.PEN\Shell\open\command" "" "notepad.exe %1")
However that’s for creating a new registry key entry the one I have already exists but needs to be modified, better yet the profiles name (*.arg file) can change with updates, so in my search I came across the following link.
[URL]
Now I cant put it together and am not sure where I have gone wrong…(See code bellow)
(vl-registry-write "hkcu "\Profiles\" (getvar 'cprofile) "\General\DefaultConfig" "\\DCMAR02\A03P20")
can i use the "methods supported" " FindXYAtStationAndElevation" to retrieve a elevation and station from a profile view?
View 4 Replies View RelatedWhich registry Key stores the name of the Current profile ("cprofile")?
I tried following, all reurn 'nil'
(vl-registry-read "HKEY_CURRENT_USER\Software\Autodesk\AutoCADR18.1\ACAD-9005:409\Profiles")
(vl-registry-read
"HKEY_CURRENT_USER\Software\Autodesk\AutoCADR18.1\ACAD-9005:409\Profiles\(default)")
In the registry when I double-click the key, the value is displayed. But I can't access it.
Any routine that would allow you to cut out an odd shape from a solid with the profile of a polyline?The goal would be to have all the pieces that are left, not subtract them out..
View 3 Replies View RelatedI recently lost my windows autocad profile and i am having to start redoing the auatocad laout from scratch. I have the xtp file for the palettes which have loaded the images in ok, however there are some palettes which have not "linked" with the images in the image folder. How to reassign every single image to the item in the palette?
View 1 Replies View RelatedI am trying to draw a line between two lines and I put together the following. It works great if the start/end points are perpendicular to each other. How do I solve if line one start point is in a positive direction and line two is in a negative direction?
(defun c:test ()
(setq L1 (car (entsel "
Select the first line: "))
L2 (car (entsel "
Select the second line: "))
)
[code]....
I am having a problem with starts and ends of lines. I have draw two lines, end of first is start of second. The problem is because, (cdr (assoc 11 (entget line1))) and (cdr (assoc 10 (entget line2))), somehow, are not the same,
(= (cdr (assoc 11 (entget line1))) (cdr (assoc 10 (entget line2))))
is returning nil, what is so confusing to me is that:
(=(nth 0(cdr (assoc 11 (entget line1)))) (nth 0(cdr (assoc 10 (entget line2)))))
is returning true, the same is for y and z coordinates.
I need to check x y and z coordinates, for this type of problem...
I need to place a circle, of a user-defined radius, as a marker at the endpoints of all lines in a drawing. how to accomplish this using lisp? It doesn't matter if they overlap; I can use OVERKILL to delete those objects.
I started the code with:
(defun c:cmark ()
(setq crad (getdist "
Specify radius: "))
)
But don't know how to cycle through the objects, determine the end points of lines only.
Is there any simple code for to sum length of lines which is i am choosing and copying result to chosen attribute tag ?
View 1 Replies View RelatedHow do I select the layer in which I want to draw?
for example i draw two line and Each of them has to be in different layer.
How do I select the layer which I want to draw?
There are many lisp that draw offset line but what about opposite way , I have wall of double line i need to delete one of them let's say inside wall line .
why i need to do this usually when i tracing in external program like autocad architecture or Revit or archicad i just need outline of exterior and interior walls !.
is there way that can delete the offset line ?(or within range predefined in lisp to prevent interfering of lines deletion).
I have little Autolisp experience, what I need is a lisp routine that will divide a 3D Poly line to say about 1000 points and add index to the points from the start of the line to the end of the line. It is very important that the index be from the start to the end of the line, because we extract the info to excel and then use the x,y and z co-ordinate of the points on our hydraulic analysis program. We need to have the index and the x, y and z co-ordinates on our Excel sheet sorted by index and not by x, y and z.
To be more clear the 3D poly is a pipeline profile so we need to have the points in order by index and not by x, y and z.
Is it possible to control the UCS without using the command line? I'd like to access it and control it with vlisp much the same way I can access DXF groups and manipulate insertions. Seems like it should be possible to play with it's definition inside the object model.
View 5 Replies View RelatedI need lisp that do a line between 4 lines.
View 7 Replies View RelatedI have a custom command that I can initiate (c:TxtE). The function starts running but I need to begin adding several inputs at the command line following this. (ex: "4" "all" "" "oldtext" "newtext"). How do i do that within lisp once the custom command has already begun? If I need to modify the function how would i pass all these as optional type variables?
View 7 Replies View RelatedSomehow, I manage to turn of one variable that display errors on command line.
For example:
(seq a 6)
suppose to return, on command line, something like:
error no function definition: SEQ
I've written my first little Lisp function.What it's for is drawing a simple borehole profile that can then be used to draw stylized cross sections on top of it.
Upon start the lisp, pick a point on screen (to get the X coordinate [x1 below]), then enter ground level at the command line [g1 below], then enter as many thicknesses as are present in the borehole log (will vary, but typically between 3-12). These I added to a list, because that seemed to make sense when I did it.
What I want it to do then is draw a pline from x1, g1 down to the next point (x1,g1 minus the 1st thickness), then the next (x1,g1 minus the 2nd thickness) etc., to the bottom of the borehole.
Then my CAD guys can sit there, and using the borehole logs, enter the values of the boreholes and it draws them on the screen, making it easy to join th dots.
It might be good if it placed a Acad point at each point as well, but I'm not overly bothered about that at the minute.
Here's my attempt so far.
(prompt "Type 'e1' to run...")
(defun c:e1 ( / )
(command "graphscr") (setq x1 (getpoint "
Pick insertion point:")) (setq x1a (car x1))
(initget (+ 1 2 4)) (setq g1 (getreal "
Enter ground elevation: "))
(initget (+ 1 2 2)) (setq lvllist nil ) (while (setq lvl (getreal "
Enter layer thickness <Exit>: ")) (setq lvlList (append lvllist (list lvl))) )
(princ) )
I am trying to create a report of line lengths based on linetype.
I have built a list that looks like this...
(("CUT4SS" . 859.566) ("CUT4SS" . 862.231) ("CUT4SS" . 927.651) ("CUT6SS" . 1158.48) ("CUT6SS" . 509.903) ("CUT6SS" . 2840.31) ("CUT4SS" . 967.76) ("CUT4SS" . 508.73) ("CUT4SS" . 111.065) ("CUT4SS" . 483.216))
I want to take this list and create a function to create a list of total lengths i.e. the CDR's.
(("CUT6SS" .total length)("CUT4SS" . total length))
There is a very complecated drawing. Texts are on a line and crossing a line or something like that. Some texts has insertion points on the line. When the line is selected by LISP, only the specific texts with insertion points on the line are selected. Does it make sence?
View 8 Replies View RelatedI have a lisp file that reads in a point list from a text file and creates a number with a circle around it for every point, then a line from one circle to the next in line with the center point of each circle. Is there a simple way of making the lines "go behind the circles". The portion of code that creates the circles, lines and text is as follows and a cutout screen dump of what it looks like is below.
(setq amount 0)
(foreach item lines
;;; ;;
;;; Create the text ;;
;;; ;;
(setq x (+ (atof (nth 2 item)) (car pt_origin)))
(setq y (+ (atof (nth 3 item)) (cadr pt_origin)))
[Code]....
IV 2010
I am trying to get the end points of an invisible line it would be the line that you offset I know all about polar I just don't know which angle to add or subtract and I will pick the point on the side I want it to be on I am going to pick 2 lines and I want them to offset invisible lines in the middle the lines are not parallel.
View 8 Replies View RelatedCan I select a line and get the nearest endpoint so I can do something to the line using the endpoint as a base?
It will include an ssget and an osnap "end" in the code, but not too sure how to put it together.
Lisp routine that will rotate Mtext to the same angle as the angle of a selected line and the allow you to place the mtext object where you wish.
I know there is an lisp out there called RTL that will allow you to do this with regular or Dtext, but I will not work with Mtext.
I was looking for a post on the subject of line and circle intersections and found one that Bill Z had posted. I decided to incorperate one of the replies into my own code. In particular Luis Esquivel's code. With some minor modifications I was able to add the onseg argument that extends intersection points for the line to the circle. I also modified it to return only one point or two points depending on the line and circle supplied and the onseg argument. It seems to work great.
; test function
(defun c:go ( / )
(ed_init)
(while
(or
(not (setq ent (entsel "
[code].....
We have a need to select a tangent line/polyline etc and then select two other points we would then like to have the program draw an arc through the two points and yet still be tangent to the initial line/polyline that we picked. We don't care what the radius is as we believe there is only one solution anyway. It would be wonderful if we could just use the Arc command and select start>Second Point> then just use the Tangent Osnap but I guess that is out of the question :-)
The only code that I have come across that even resembles this only allows for one point not two (STILL VERY HANDY AND VERY SLICK)
(vl-load-com)
(defun near_vertex_arr (obj / dxf_obj e_next obj_vlax pt_sel par pt_first pt_snd i bulge)
;bruno.valsecchi
[Code]....
How does everyone else hande this? By they way... I dont care what language it is written in :-)
How do you detect the intersection of a line and circle or arc.
View 1 Replies View RelatedLisp Routine that could replace a line at a specified maximum length with a block at the lines midpoint.
I would love to be able to replace all lines I select which are say less than 0.5m in length with a block at the lines.