AutoCAD 2013 :: How To Remove End Of Extrusion
Aug 2, 2012am used to using autocad 2010, i am using 2013 now and i cant figure out how negative extrude so to speak, if i extrude too far, how do i remove the end of the extrusion?
View 1 Replies
ADVERTISEMENT
Photoshop :: Can Remove 3D Extrusion Once Applied In CS6
Nov 2, 2012Can you remove 3d extrusion once applied in CS6?
I made some nice text, but I would like to remove the 3D without losing the font choices/placement etc..
Is there a way to right-click and delete 3d extrusion?
AutoCAD 2013 :: Hide Part Of Extrusion
Mar 1, 2013I would like to create an effect similar to punching/stamping something in wet sand. Picture this... you have a punch/stamp and it says "Hello". You punch it into the wet sand at the beach and it keeps the form of the punch/stamp. You can see the interior angles/shapes, but not the exterior as it is part of the rest of the beach I want to be able to create that effect in a graphic/drawing.
If you want to look at it another way:
Say you have a glass. You also have a hole in the table to hold the glass. Once in the hole, you see only the very top of it and the inside of the glass... but that which is below the table is not seen. If looked at from above, you can see the interior that is below the table, but not the exterior.
AutoCAD 2013 :: Rotated Sections Through Extrusion
Nov 12, 2013Acad 2013 on a capable Windows 7 machine.
I would like to cut a section through an extrusion. Attached find a section view of my extrusion cut at 90%%d. My deal is I want to be able to specify the angle. It could be anything, and it could be a compound miter (using in saw-speak, because my drawings go to saw operators), that is, angles in two directions. But, let's keep it simple - how to cut a section parallel with the Y axis in the attached drawing?
Right now I am warping something in due to the complexity of the profile. But for accuracy sake it is obvious why I'd like something better. I'd like my operators to have confidence in what they see.
I could do this easily in Inventor. Or even oin Civil 3D, working around it (using Autodesk-speak). But, I have neither. Is this a UCS thing? I trained myself to never touch the UCS long ago, because I am a surveyor by trade, and surveyors pull coordinates from AutoCAD (or one of its children) to stake points on the ground with, and a surveyor ends up working at McD's if she/he goes outside with coords pulled from a made-up UCS. So I don't know the first thing about manipulating the UCS, despite daily use of the products since release 12.
I looked at Sections in the 3D modeling workspace palettes, but nothing really jumped out at me for being able to rotate or cut sections where I want them to be. They all seem to snap to existing planes of the extruded solid. Big deal - I can do that intuitively just by looking at the part.
AutoCAD 2013 :: Self-Intersecting Curves For Extrusion
Oct 31, 2013I have been working on this project for awhile, trying to get it to extrude. The top drawing of the shape is when I created it, still as lines and arcs. The bottom pices are what I have broken it into and joined as polylines for extrusion. The top most piece of these is the one I have been working with, with no solution found. The 3 smallest of these pieces do extrude, but I need all of them to extrude as they are all different heights.
Once this extrusion problem is solved, the rest is just unioning it together and to the rest of my project. I have tried exploding them, overkilling them and joining them again, I have tried the boundary method I have found on forums, nothing is working. I have gone through with a fine tooth comb on the top most section and made sure there wasn't anything extra. I have tried using pedit on it, and many of the commands say you can't do this on a closed polyline. If its a closed polyline, why won't it extrude? I could find anywhere where it was "Self intersecting curves" like the error says when I try to extrude it.
AutoCAD 2013 :: Create Invisible Extrusion Rather Than Cutting Into Object
Sep 28, 2012Press/pull has been working fine up until now. When I try to press/pull a boundary, it creates an invisible extrusion rather than cutting into the object.
View 3 Replies View RelatedAutoCAD 2013 :: Remove Prefixes From Blocks?
Aug 6, 2013In my files there are over 2000 blocks with the name like 1234$0$Block1, 1345$0$Block1,....
Could we remove prefixes before Block1, i try with rename and blockreplace but have to do one by one.
AutoCAD 2013 :: Remove All Of A Block Attribute
Nov 20, 2013I have a several drawings from an outside source. There are blocks in the drawing which I can not remove the attributes. I have tried exploding, erasing, and redefining block. This doesn't seem to remove all the attributes. That is I erase all the attritube that I can see while editing in place. When I save new defintion I have it replace existing block.One attribute remains.
I have tried to use Battman and resync. It allows me to remove all the attributes except one.Point is, I would like to keep the current blocks cleaned up in the drawing without having to go to each and put a new block and remove the old. Not sure of the origin of these blocks.I believe they came from an AutoDesk AEC source and may have been XREF into drawing.
AutoCAD 2013 :: Remove Items From Top Right Menu
Aug 19, 2013I've recently installed AutoCAD 2014 and am working to get it compatible with my company's internet standards.
There are some features that are not cool with our IT & Security to have enabled in our office.
I'd like to remove these 3 items from the upper right menu. (see attached image).
The items are...
Sign In to Autodesk 360
Autodesk Exchange Apps
Stay Connected
AutoCAD 2013 :: Remove HATCH Boundaries
Apr 18, 2013I need to remove Hatch boundarys. I have tried Hatch Edit - Remove boundarys. Then AutoCad wants me to select Select object or..
I cant seem to select anything in this option?
AutoCAD 2013 :: Unable To Remove Data Link
Jun 21, 2013I cannot remove datalink was created by Insert Sheet List Table. Cannot see it in Datalink Manager.
View 6 Replies View RelatedAutoCAD 2013 :: How To Remove Edges Of Array Object
Jan 9, 2013I've created arc, then 3 side polygon and placed created array. Now I want to delete those sides. How can I do it?
View 2 Replies View RelatedAutoCAD 2013 :: How To Remove Infer Constrains Little Icon
Sep 11, 2013Today i have a new thing appearing close to my picking box inside autocad. I believe it has some relation to infer constrains options.
I go into infer constrains then i can remove some pop up box but i can't remove the blue icon you can see inside the image close to the pickbox.
How can i remove this blue icon?
AutoCAD 2013 :: Remove The Extra Sash Lines
Nov 11, 2013Is there a way to remove the extra sash lines which, in plan, are meant to represent the sash below the cut plane? I want to keep the sash "nub" at adjacent to the frame, but remove the lines which run parallel to the glass.
See attached pdf for detail of what I'm referring to.
AutoCAD 2013 :: Remove OVERKILL Functionality From Block Editor?
Aug 22, 2012Did Autodesk remove OVERKILL functionality from the block editor?
View 1 Replies View RelatedAutoCAD Inventor :: Remove Sheet Metal Rule From 2013?
Sep 14, 2012I have not found a way to remove a sheet metal rule from appearing in the list of available options when making a sheet metal part. Is there a way to manually remove the incorrect rule?
I tried opening the sheet metal rule xml file and deleting out the section that codes the rule I want to remove, but after opening inventor and checking the xml file again, it has returned.
AutoCad 3D :: Extrusion To 3D Solids?
May 13, 2013I'm trying to understand extrusion to 3D solids better. This started when I drew a joined, closed 3dpolyline and found it wouldn't extrude (the shape titled 3D POLYLINES 4 sides joined, in the attached DWG), even though everything lies in the same plane (z=0). It gives the error "segment chord not perpendicular to normal". A chord is part of a circle, and there are no circles in the .dwg, so I don't understand the error. If you join only 2 or 0 sides, then at least 2D extrusion to a surface is allowed, but not if all 4 sides are joined, i.e. one 3D polyline.
If I draw regular polylines overtop the 3D polylines, then join and close them, it extrudes into a solid. This suggests that 3D polylines can't be extruded into a solid when regular polylines can, yet if I draw some scratch 3D polyline geometry that is joined and closed, these 3D polylines will join. It's as if I've found some secret shape that AutoCAD refuses to allow extrusion on.
AutoCAD Inventor :: Error In Extrusion
Oct 4, 2013What's wrong with extrusion 15?
I deleted many features since the file was large, and many features got warnings, but extrusion 15 was the only one with warning in the original file.
AutoCAD Inventor :: Add Extrusion On Assembly
Aug 16, 2012I wanted to add an extrusion to an asembly. I was able to highlight the required geometry and create the feature, but is not showing up. In the browser, there's a red "up arrow" beside it. Why is it not showing?
View 3 Replies View RelatedAutoCAD Inventor :: Extrusion Using ILogic
Aug 9, 2012I have closed profile "Sketch1" placed on one of the parts in Assembly.
Suggest iLogic code to create cut Extruson (Extents=All) based on the "Sketch1"
AutoCAD Inventor :: How To Get Extrusion To Update
Oct 27, 2012First off if I update a sketch block in a derived part, how do I get the sketch blocks to update? Do I have to delete derived item, and rederive it?
Also if I modify a sketch block that is used for a extrusion, how do I get the extrusion to update? Do I have to delete extrusion and rextrude?
AutoCAD Inventor :: How To Add Solids To Cut Extrusion
Apr 12, 2013I have a multibodied part (roughly 700 parts) and I need to do a cut extrusion. The problem is that when I'm cutting through a hundred or more solids I might miss one if it's close to the edge. I though, no problem I'll just go back to the extrusion command and add those solids I missed. Problem, the program only lets me select one solid and undoes all I had previously.
2013 FDS
AutoCad 3D :: Changing Profile Of Extrusion
Sep 25, 2012I understand how the current extrusion command works - You have a 2D polyline profile and you apply the extrusion command to that, getting your 3D shape.
However, I have a drawing full of different sized extrusions based on the same 2D polyline, and now I want to change that initial 2D polyline without having to manipulate each polyline separately. I thought it would be much better if the initial 2D polyline were referenced, allowing you to swap that inital 2D polyline with another 2D polyline. Is there a way - or a plugin - that is available to do this in AutoCAD?
FYI - the profiles are used in kitchen doors, and I want to be able to simply change the door profiles without resorting to re-extruding the whole lot.
AutoCAD Inventor :: Move Extrusion Forward?
Aug 20, 2012I'm trying to move a rectangular extrusion towards me on an object, however it will only go farther away from me, and to the right and left.
View 9 Replies View RelatedAutoCAD Inventor :: Mirror Of Extrusion Cut Not Working?
May 17, 2013I cut a curved profile using extrusion and mirrored it about the original plane. But It doesn't cut thoroughly ? there is still a surface of the rarer side of the part ?
the original extrude cut was "Through All".When do the same cut gving a distance...it mirrors perfectly..
AutoCad :: Weight Per Meter For Alum Extrusion?
Jun 22, 2012The MASSPROP command tells me this thing has an area of 0.785 square meter. I can run MASSPROP on it and get some information but how would one determine how much weight for aluminum would be involved with this and how could I calculate? I want to know the weight of extrusion in kg/m. and also show how?al ex.dwg
View 9 Replies View RelatedAutoCAD Inventor :: Hiding Extrusion (cut) In Assembly
May 17, 2012I am working on detailing an assembly that requires two parts to be bolted together and then have a hole bored through both parts. I want to show the assembly without the bore and then with the bore. I do not want to have to create a derived part. There should be a way of toggling this extrusion in the assembly view, but I have not yet found it.
View 4 Replies View RelatedAutoCAD Inventor :: How To Know Which Parameter Belongs To The Extrusion
Jul 20, 2013In sketches i can see the names of the dimensions, the parameters, but if i have a few extrusions, can i know which parameter governs the height of the extrusion only according to their content?
View 1 Replies View RelatedAutoCAD Inventor :: Lines Do Not Connect For Extrusion
Jun 9, 2012All of a sudden, my line tool in sketch mode does not connect segment to segment and each individual line can be dragged wherever. This also means I cannot extrude any shapes I make because inventor does not realize the series of line segments create a closed shape. This happens across all part files, old and new.
View 3 Replies View RelatedAutoCAD Inventor :: Extrusion 3 With Glass Appearance
May 22, 2013How can i have extrusion 3 with the Glass appearance or clear so as to look like Glass ?
View 2 Replies View RelatedAutoCAD Inventor :: Pipe Length From Extrusion For BOM
Jun 25, 2013We've got a lot of pipe added from CC then manually edited the extrusion length (D2) while modeling (not using tube and pipe). Now I want to get pipe lengths from the BOM. Currently the BOM gives the PL parameter as length, which is incorrect.
I know I can rename D2 and mark it as an exported parameter and add that to the BOM.
I think I could also make PL equal to D2 which would also solve the problem.
Both of these solutions would require opening and editing hundreds of parts, taking a LONG time.