In sketches i can see the names of the dimensions, the parameters, but if i have a few extrusions, can i know which parameter governs the height of the extrusion only according to their content?
View 1 RepliesI have user parameters that are no longer needed and are not being used anywhere. They each takes 4-5 seconds to delete, prior to 2012 this would happen instantly.
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
I need to convert a model parameter to a reference parameter thru the API.
I saw this item discussed in the group before, but I cant find the thread.
I got a deadline for my project, but I got a big problem:
"I cannot set the "parameter" for the End Value in Parameter Animate dialog"
For easy understand, let's see a example:
1. I got a part which has two parameters named: "A" and "MaxA"
2. I animate Favorited parameter A.
3. The End Value is MaxA_ (Everything is ok)
4. I finish Studio environment, then I change parameter MaxA_ from 200 mm to 400 mm
5. I turn back to Studio environment, the End Value now is "200 mm" (I want this will be MaxA_, so I can animate the flexible parameter).
show me how to keep the end value will be "MaxA_" after I change parameter?
I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
What's wrong with extrusion 15?
I deleted many features since the file was large, and many features got warnings, but extrusion 15 was the only one with warning in the original file.
I wanted to add an extrusion to an asembly. I was able to highlight the required geometry and create the feature, but is not showing up. In the browser, there's a red "up arrow" beside it. Why is it not showing?
View 3 Replies View RelatedI have closed profile "Sketch1" placed on one of the parts in Assembly.
Suggest iLogic code to create cut Extruson (Extents=All) based on the "Sketch1"
First off if I update a sketch block in a derived part, how do I get the sketch blocks to update? Do I have to delete derived item, and rederive it?
Also if I modify a sketch block that is used for a extrusion, how do I get the extrusion to update? Do I have to delete extrusion and rextrude?
I have a multibodied part (roughly 700 parts) and I need to do a cut extrusion. The problem is that when I'm cutting through a hundred or more solids I might miss one if it's close to the edge. I though, no problem I'll just go back to the extrusion command and add those solids I missed. Problem, the program only lets me select one solid and undoes all I had previously.
2013 FDS
I'm trying to move a rectangular extrusion towards me on an object, however it will only go farther away from me, and to the right and left.
View 9 Replies View RelatedI cut a curved profile using extrusion and mirrored it about the original plane. But It doesn't cut thoroughly ? there is still a surface of the rarer side of the part ?
the original extrude cut was "Through All".When do the same cut gving a distance...it mirrors perfectly..
I am working on detailing an assembly that requires two parts to be bolted together and then have a hole bored through both parts. I want to show the assembly without the bore and then with the bore. I do not want to have to create a derived part. There should be a way of toggling this extrusion in the assembly view, but I have not yet found it.
View 4 Replies View RelatedAll of a sudden, my line tool in sketch mode does not connect segment to segment and each individual line can be dragged wherever. This also means I cannot extrude any shapes I make because inventor does not realize the series of line segments create a closed shape. This happens across all part files, old and new.
View 3 Replies View RelatedHow can i have extrusion 3 with the Glass appearance or clear so as to look like Glass ?
View 2 Replies View RelatedWe've got a lot of pipe added from CC then manually edited the extrusion length (D2) while modeling (not using tube and pipe). Now I want to get pipe lengths from the BOM. Currently the BOM gives the PL parameter as length, which is incorrect.
I know I can rename D2 and mark it as an exported parameter and add that to the BOM.
I think I could also make PL equal to D2 which would also solve the problem.
Both of these solutions would require opening and editing hundreds of parts, taking a LONG time.
We design long overland conveyors that can be kilometers long. In two separate instances, I have extruded a profile along a path that is a few hundred meters long with no problem. However, when the path gets to around 700 meters, the extrusion that worked fine at 600 meters simply falls apart. Does Inventor seriously have a limitation to length of an extrusion?
View 9 Replies View RelatedI design press tools. Is there any ways in inventor 2012, where I can have only one common sketch in zero height and extrude profiles in different heights. Like plate no 1 @100 to 120mm (in vertical axis. A 20mm thick plate placed at 100mm above zero plane.) and plate no 2 in 150 to 175mm height and so on.
View 6 Replies View RelatedI have a sketch for a 1.125" tall bounding wall. The inside contour is projected, and the outside contour is offset .125." When I extrude the desired profile, the inside corners, which are project radii, turn inside out. I don't know how else to explain it. I will attach before/after screen shots.
I reboot my PC at lunch because I was getting other odd errors, lots o' C++ runtime joys. That was some two hours ago, and I had a slew of errors/crashes after that around one. Now, no error messages, but this interesting occasion.
I'm trying to modify the depth of extrusion feature "Extrusion1".
As you can see, it doesn't let me. It only allows the extrusion setting "new solid".
I have just downloaded an educational version of Inventor. Although I can create sketches I cannot extrude the sketch to form a solid. The origin arrow heads appear over size and it seems as if the origin plane is being extruded to form a solid!
View 2 Replies View RelatedCan extrusion-1 be shelled between the 2 work planes?
View 4 Replies View RelatedI need to do a cut extrusion on a multibodied part and need to select the solids. As of right now I have to select each one individually rather than doing a drag box or something like that. how I can do this fast, I've got a multibody part w/ over 1000 solids (I didn't create it, yes I know this is probably excessive).
View 9 Replies View RelatedIn working with Autodesk Inventor I accidentally exited out the menu that displays all my different extrusions and sketches. what this menu is called and how I get it back?
View 2 Replies View RelatedI am trying to extrude sketch 3 to the Extrusion 1 but keep getting Error....is this the wrong way to create?
Also the Extrusion 2 cut out for centre hole does not seem completely round.....
Could this part be made using better techniques.....how can i create this part with better steps
Inventor Edu 2013
Whenever I edit an Extrude 'cut' feature,(eg: To Add or remove a profile), the OK button is greyed out and no matter what I do, I can't get it back.
The only way to edit the extrusion is to:
Shift EOP
Delete the extrusion
Recreate the extrusion.
Shift EOP
fix errors if any.
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
When I try to select several solids for an extrusion cut/interference I can do so fairly quickly by selecting all of them in the browser so long as the extrusion is set to "all" or "distance".
For some reason when I need to do a "to" or "between" I have to select them one at a time. Every time I select a solid the select solids options returns to the input so that I have to select one solid then press the "Solids" button and select another one. This tends to do the same thing if I create an extrusion and then want to later modify the solids taking part in the extrusion. Is there an option I can turn off?
Inventor 2014. I have watched everything I can find and read many entries on related messages.
I create a part by creating rectangle on the XY of 90mm centered on 0,0. I add fillets on 3mm on all four corners. I then add two circles centered on 0,0 of diameters 45 mm and 41mm. What I would like to do is extrude the area between 41 mm and 45 mm circles to 10 mm and the rest of the rectangle outside of the circle 45 mm circle to 6 mm. The center of the part from center to the 41 mm circle is void or open.
I have read two solutions that use a "share sketch" function, that I can't find by right-clicking as indicated in the write-up.
I am new to Inventor, running Inventor 2012. I know Solidworks.
I have a sketch with ellipse and then squares inside the ellipse. I am trying to edit the part not create. The program extrudes either ellipse or squares. New problem: the extrusion is picking wrong sketch. I need to finish the part....
I am trying to create a sketch on a face for an extrusion. The sketch has a text box. I am having trouble excluding the text in a sketch otherwise all the closed geometries of the text get extruded.
I created an objectCollection and excluded the TextBox objects. Still not working.
I have a model in which we want to make lighter than the prototype turned out to be. In order to acomplish this i am removing a chunk of the metal in the lid(images attatched. I have completed the sketch seen in red and extruded it to prove that the loop is complete but when I try to reverse the extrusioni to cut from the lid dragging down the arrow as an example, it turns the effected area a darker red than normaly seen when you cut something. When I let go of the left mouse button it pops back up to the original surface having no effect and refuses to go benieth it and when I apply I get the error seen at the bottom of the attatched image. I do this sort of cutting often instead of digging down to the root sketch then dealing with the ripple effect of the changes we want to make.
View 4 Replies View Related