AutoCAD Inventor :: Ipart - Standard Parameter Column Change Depending On Custom Parameter Column
Jan 3, 2013
I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
In a simple case I have an extrusion with some attached seals/weather stripping, all implemented as iParts having their own LENGTH parameters.
RailPart.ipt, Seal_A.ipt, Seal_B.ipt
The goal is to encapsulate these IParts within an iAssembly: RailAssy.iam, where a LENGTH parameter can be input when the iAssembly is placed, causing RailPart and Seal_A to have their length parameters set to the LENGTH provided at that time and SEAL_B having Length set by an iLogic rule to LENGTH - 5.
I've been unable to set up a Custom Parameter Column in an iAssembly table. Is this even permitted?
I have an iPart in which I want to change the File Name Column from "Member" to "Part Number". These columns are not the same and makes the filenames for the members different when generated.
The challenge is that I already have about 100 members generated and used in different assemblies. I want these to be replaced by the new files and be deleted.
If I change the File Name Column I will get 100 new files (ipart members) that is not used anywhere. The only way I know of to replace the 100 "old" members is to do this in Vault - one by one..
when i create an ipart with an custom parameter column, the files are created in the workspace. Is there any way how i can change this location?
Many parts are piling up in the workspace.For example to the library (like "normal iparts" do) or to a folder in the workspace (workspace/ custom_ ipart_ folder)?
In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
I would like to know if there is a way to have the Schedule as an I-Part parameter of a flange. I'm trying to create a custom flange for use in the content center and would like both size and ID to be picked from a drop down when placed into an assembly.
Since it's a flange not a pipe I can't use the standard tube & pipe authoring method.
I am trying to make an iPart of a fitting where I can change the "Body type" and it will change all the parameters associated with that body type through iLogic. Really I am just playing around in iLogic to see if this is something worth learning. Back to the point, I would like to change a multi-value user text parameter through the iPart table but I cannot find the paramter in the parameters tab.
Since it is a user parameter I thought it would be in the "Other" folder but it isn't. I do however have the other multi-value user number parameter in that folder, which makes me think that maybe I can't use the paramter in the iParts table?
INV 2012 SP1 Windows 7 64 Bit ATI FirePro V5800 14.0 GB RAM
I've created a main assembly containing several ipart components. With the following rule I can read the model parameters, but not the user parameters of the iparts:
A = Parameter("Part1:1", "d0")
If I create a component, insert it in the main assembly and make it an ipart afterwards, the user parameters can be read out with ilogic. But if I insert the same ipart again, the user parameters can not be read out anymore. Model parameters are no problem.
I have a program that create a bunch of new custom Iprop in each part of an assembly.
How can I show all those new properties when I open the BOM in the assembly file. Manually I can add a custom column but that is time consuming. Is there a way I can create a macro that will add those custom column in the BOM view?
I have an assembly with a custom iproperty column that filled a need that has recently been removed. How do I delete the column from the BOM editor? I realize the iProp will still exist in the part files, I just want it gone from the BOM editor when I open it. I thought I could just delete it from the "Add Custom iProperty Columns" button but no dice.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1) Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I have user parameters that are no longer needed and are not being used anywhere. They each takes 4-5 seconds to delete, prior to 2012 this would happen instantly.
I copied an existing family into my new read library. I added some rows to be able to generate a few variations that were not contained in the original family. I just copied existing row up several times and edited the information in those rows to yield desired new variations. I made sure the file name column contained a unique file name for these new members. When I go to publish I get this error message:
Defined file name does not include all custom columns. An identical file name can be generated for different members. Make sure that the file name is unique for any combination of custom column values to avoid placement failure
Missing Custom Columns:
Length
(see also attached screen shot)
I have scoured the file name column and can find no repeated file names; I cannot understand the rest of the error message. It must have something to do with the "does not include all custom values" portion of the error message.
I want to add a column to my parts list, which displays a value based on a formula.
Lets say i want to show the submerged weight of a part; So i need to create a column, which can use the information about a parts volume and mass to calculate its submerged weight.
An easy formula, but is this possible in Inventor (2012 Pro)?
I got a deadline for my project, but I got a big problem:
"I cannot set the "parameter" for the End Value in Parameter Animate dialog"
For easy understand, let's see a example:
1. I got a part which has two parameters named: "A" and "MaxA" 2. I animate Favorited parameter A. 3. The End Value is MaxA_ (Everything is ok) 4. I finish Studio environment, then I change parameter MaxA_ from 200 mm to 400 mm 5. I turn back to Studio environment, the End Value now is "200 mm" (I want this will be MaxA_, so I can animate the flexible parameter).
show me how to keep the end value will be "MaxA_" after I change parameter?
I've got a custom VBA function that works perfectly when called from a parameter in my part.
However, when in the context of my assembly, there is no error, but the function no longer runs, and the parameter text is red.
Apparently, the function is no longer in context?
I've heard of external rules, but have never implemented one.
Is there a way to declare my function and keep it in context regardless?
Public Function BumpHeight(dblHeight As Double, dblMember As Double) As Double Dim X As Integer X = 2 If dblHeight > dblMember * 2 Then BumpHeight = dblHeight Else BumpHeight = dblMember * X End If BumpHeight = BumpHeight / 2.54 End Function Here is the Parameter:
VBA:BumpHeight(ValanceBackBumpoutHeight;ValanceMemberSize) * 1 in
Update: (problem better defined)
What seems to be happening is that once I insert the part into an assembly, it creates a new blank copy of the parts' modules in VBA and the functions no longer work.
If I go to the VBA editor,
There are now two copies of my part listed in the browser tree, but the new one is blank.
If I paste in my function to the new one, it will work until I return to the parent assembly.
Next time I come back to the part, it will have a new blank set of modules.
This appears to continue indefinitely...
see the attached screenshot.
At this point there are only 2 copies of the DocumentProject. The original still contains my functions, but the new one is blank.
I need these functions to work in order to build my model.
Just installed 2013 Pro x64 and I'm doing a little testing. Using Tube and Pipe, I created a few mock pipe runs which are named according to a unique line number. When clicking on the Iproperties of any of these pipe runs, I can see that the value of model parameter "Part Number" now includes the name of the top level assembly and the line number, which is the name I assigned to the pipe run when I created it (see Fig 1 attached). Then in IDW I created a user defined symbol which contains text that I have directed to extract value of "part number" from the model properties, and fill in my symbol with that value (see Fig 2). The problem is, when I tag the pipe run with my custom symbol, the value in the symbol remains blank, instead of giving me the value of "part number". WHAT am I missing??
I am trying to create different bend tables for different thickness material. If I have two radii that are the same for different thicknesses it gives me an error message on the second one that it is a duplicate column heading value. The values of the bend table are dependent on the thickness of the material. Why can't I have several different thicknesses with the same radii?
I would like to use a multi-list parameter in a form, that isn't a problem. However I want the selection to be copied to a custom parameter when the form closes. Is there anyway to fire a rule when the form closes or to add a multi-select list to a parameter, in a form?
An application that will let me choose a group of Drawing files (.idw) and perform "Save Copy As" to a PDF format on them. The Filename of each Drawing should be extracted from a custom Parameter I embeded in the IDW file.
I know I can use the Task Manager with a virtual PDF Printer to create these files, but then the PDF Filename will equal the IDW Filename, and I want it to be derived from the custom parameter I prepared inside the drawings.
I have generated frame that has 100 members in it. Is there a quicker way of changing G_L unit to a mm so that I don't have to go into all 100 parts to change the custom properties?
Also I do not need unit string to be appear in my BOM.
