AutoCAD 2013 :: How To Change Name From Column To New Column
Oct 21, 2013my drawing file , have block name 'column' but i want to change name from column to new column.
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Ipart - Standard Parameter Column Change Depending On Custom Parameter Column
Jan 3, 2013I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
AutoCAD Inventor :: Copy All Information From QTY Column To PartQty Column
Oct 17, 2013In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedRevit :: Slanted Column Meets Beam / Column Joints
Feb 7, 2012I have a problem inserting the slanted columns when I use the "Beam/Column joints" commando. When I insert the slanted column, the beams are divided.
It should look like picture 1, but it always ends up as image 2. How can I solve this?
AutoCad 3D :: Change 2D Spiral Column Into 3D Solid?
Oct 1, 2011I attached a draw of a spiral column that I 'd like to make into a 3D solid.
View 9 Replies View RelatedAutoCAD Civil 3D :: Change Column Names Not A Cell
Oct 9, 2013Is this possible if i can change the column names, not a cell. For instance: Name of the column is "Full Description" to become something else? Or add a new column with my own description?
View 1 Replies View RelatedAutoCAD 2013 :: Column Grid Command Not Working?
Mar 20, 2013I am using AutoCAD 2013 - Educational Version, and I want to convert my linework into a column grid. For some reason the COLUMNGRIDADD command is not being recognized by the program. When I type it in the command line, it just says Unknown Command.
Additionally, my Build Panel is missing from the ribbon, which is the other source for the column grid tools. I tried to reload or change the CUI, but so far this has not been successful.
AutoCAD Inventor :: Change File Name Column In IPart Table?
Jul 25, 2013We are using Inventor and Vault pro 2013.
I have an iPart in which I want to change the File Name Column from "Member" to "Part Number". These columns are not the same and makes the filenames for the members different when generated.
The challenge is that I already have about 100 members generated and used in different assemblies. I want these to be replaced by the new files and be deleted.
If I change the File Name Column I will get 100 new files (ipart members) that is not used anywhere. The only way I know of to replace the 100 "old" members is to do this in Vault - one by one..
AutoCAD Civil 3D :: Change Number Of Section Views Per Row / Column
Aug 20, 2010How do I change the number of section views per row/column when using the create multiple section views command? It's defaulting to 8 per row.
View 9 Replies View RelatedAutoCAD 2013 :: Architecture 2014 - Formula Column Totals In Schedule
Nov 22, 2013when creating a schedule with a simple formula column (e.g : [QUANTITY]*Width), the formula column total doesn't add the formula results for a grand total. The total shown is the addition of Width of element.
If I try and enable "Apply formula to totals", the total is : total quantity*total width instead of just a simple addition of formula resulting values.
For example:
I have 4 windows of 2 different styles.Two windows have a width of 2 meters, the other 2 windows have a width of 3 meters. I want to find out, my total window width, of all window styles.Therefore, i make a schedule with the following columns: QUANTITY, WIDTH and TOTAL WIDTH. The total width column is a formula column (Quantity*Width). The total of the formula column (Quantity*Width) doesn't add the resulting values (2*2+3*2=10), it only adds the simple widths without multiplication with quantity, my result is 5, wich is incorect. If i enable "Apply formula to totals", it multiplies total quantity (4) by total width (5).
I need a solution for having the corect total on the formula column.
AutoCAD Inventor :: Duplicate Row Or Column Heading Values Detected - Change The Redundant
Mar 27, 2012I am trying to create different bend tables for different thickness material. If I have two radii that are the same for different thicknesses it gives me an error message on the second one that it is a duplicate column heading value. The values of the bend table are dependent on the thickness of the material. Why can't I have several different thicknesses with the same radii?
View 1 Replies View RelatedGIMP :: Selecting Single Row Or Column (2013)
Apr 30, 2013I've been using Gimp since 2.6 and had previously used PS CS2That version had the option to select a single orw or column (from the 'Select' menu).I rarely had the need for this, but I'm now working on a project that could use that feature, and Gimp doesn't seem to have it . . . I tried selecting it with the available selection tools, but I'm not having any success with a large image.If it matters, I'm running 2.8.4 on a Win7-64bit installation.
View 7 Replies View RelatedRevit :: Change Line Thickness Of Structural Column?
Jul 25, 2013I'd like to change the line thickness of these structural columns, but changing the view graphics doesn't override.
View 3 Replies View RelatedAutoCAD LT :: Properties Column On Screen
Nov 11, 2008For unknown reason to me, when I click on properties icon column on left side describing selected properties does not appear. How do I get back the properties column on the screen?
View 7 Replies View RelatedAutoCAD Inventor :: Add IPart Column?
Nov 21, 2009Is there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies View RelatedAutoCAD Inventor :: Hiding BOM Column
Sep 25, 2012Is it possible to have a column in the BOM but i do not want to show it on the drg.
like you can do it for rows for example...
AutoCAD Inventor :: Add A Column To A Partslist
Jul 28, 2005I need to add a custom column to a parts list and have it display as the last column.
oPartsList.PartsListColumns.Add (kCustomProperty)
This code runs, but nothing happens...no error...no column..
AutoCAD Inventor :: BOM Column Customization?
Oct 4, 2012Is there a way to customize the BOM columns so that Inventor remembers which columns I need? I know that I can add in the file name column etc. but I use the same columns over and over. I find myself in every assembly adding these columns in.
Autodesk Inventor Professional 2010
AutoCAD Inventor :: FEA And Beam Column Calculator?
Mar 18, 2012When I try to calculate bending moment stress thru "Beam and column calcultor it shows an error that is Wk and Jk is missing. Ok that is fine. If we put values for both we will get the answer. Because I have come to know thru inv discussion that many material in the CC do not have these values.
Now my question is when we insert a part for example from content centre (CC) and do FEA analysis on this part. It shows some values like deflection, stress etc etc. How is that possible? one side it is not doing in the beam calculatio but other side in FEA it is doing that.
It means we are not going to rely upon these results in the FEA. It is the same CC, same inventor, how should be trust the result in FEA.
AutoCAD Inventor :: Parameter Equation Column
Sep 23, 2013how can i access the value in this column using vba?
View 1 Replies View RelatedAutoCAD Inventor :: Global SIZE Column In BOM Possible?
Feb 7, 2013I have written code to allow me to pick the dimensions of a part and update the dimension parameter name from a list of choices presented in a form e.g. length, width, thickness, outer_diameter, wall etc.
The parameters are exported and I can get overall sizes in the BOM with relevant expressions in columns. So far so good.
What I would like to do is have a global SIZE column in the BOM which has expressions that vary based on another custom iproperty (PartType) which defines the part. So for example if the PartType was 'circular plate' the expression in that parts row of the SIZE column would be <outer_diameter>x<Thickness> while if the PartType was 'tube' the expression in the that parts row would be <Outer Diameter>x<Wall>x<Length> etc
If I could do this I would not need different columns to define the sizes of every different type of material we use and also limit the number of parameters the user needs to choose from when picking part dimensions.
However looking at the BOM API I do not see an obvious way to alter the expressions.
AutoCAD Inventor :: Multiple Units In A BOM Column
Aug 2, 2013I have a BOM that shows up as in units for length items and unitless for qty items. When I change the UOM to use FT units the non-length units get inch ticks. The qty 1 which means I need one shows up as 1" where I do not require a 1 inch part but one each. How do I remove the inch ticks?
View 5 Replies View RelatedAutoCad 2D :: Set Default Column Widths In EATTEDIT
Nov 21, 2013If you can set the column widths to remember their positions in EATTEDIT? Take the below as an example, the prompts are truncated and the custom column sizes are never remembered when I adjust them.
View 3 Replies View RelatedAutoCAD Civil 3D :: Mtext Column Width
May 3, 2012Any way to make Acad C3D hold the value for MTEXTCOLUMN = 0? I am having issues with it resetting my column width to 0, even after I have formatted all the Mtext to read how I want it shown. Once I close a drawing and open it again, the formatting changes that I have previously set return to "dynamic" and column width = 0. I just want to turn off the dynamic setting so it stops messing up the formatting, but I can't get it to retain the dynamic setting. Currently running C3D 2012.
View 4 Replies View RelatedAutoCAD Inventor :: How To Get Column For Second Dimension To Display A Value
Jan 4, 2008I'm detailing an iPart. Only two dimensions need to be included in the table. One is the driving dimension and the second is a function of the driving dimension. How do I get the column for the second dimension to display a value, rather than an equation?
Inventor Routed Systems 2010
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
AutoCad :: Ramp And Twist Fillet On Column
Oct 21, 2011I have a problem I am using Autocad lite 2011 and need to draw if you can picture a column with a 15 mm deep fillet 42 mm wide which has a ramp and twist applied to it spiraling all the way up it. How do i go about this.
View 9 Replies View RelatedAutoCad :: How To Get Varying Column Widths In Mtext
Feb 21, 2012Is it possible to have varying column widths in Mtext? If so how?
View 8 Replies View RelatedAutoCAD Architecture :: Add Column To Door And Window Schedules
Jun 11, 2013ACA 2012: Is it possible to add a column to my door and window schedules that automatically shows the area of the door/window(or area of Glazing) and then have a total area column at the bottom of the column?
View 3 Replies View RelatedAutoCAD Inventor :: Method For Seeing If Column Is Present In BOM View?
Jun 3, 2013I've seen things about getting the information from the parts in the BOM list, but not about seeing what is present in the structure itself
View 1 Replies View RelatedAutoCAD Inventor :: Unknown Error Within BOM Quantities Column?
Jul 14, 2009In five years using Inventor I've never seen this- I can't get it the parts list or BOM to register the quantities. Each box comes up with "Unknown Error" and it will not allow manual override to update those quantities.
View 8 Replies View RelatedAutoCAD Inventor :: CC - Mapping Column Properties To IProperties?
Jun 18, 2012I have copied a standard "L" to my custom library. Now I would like to map the properties for the CC parts to be like my other parts that are not created in CC. One of the things I need is the "Title" and "Description" iproperty fields need to be the sectional size, i.e. L3x2x3/16, L4x4x3/8....etc.
To do this, I went into the editor and created a column. I mapped this column to Project.Description (see image)
why this does not work? When I create a new part and look at the BOM, I only see "Angled Steel" in the description iproperty field (see image below)
I did the same thing with the "Title" field and the "Project" field. Those work great.... just can't make teh Description field happen.
This is with Inventor 2011.