AutoCAD Inventor :: Hiding BOM Column
Sep 25, 2012Is it possible to have a column in the BOM but i do not want to show it on the drg.
like you can do it for rows for example...
ADVERTISEMENT
AutoCAD Inventor :: Copy All Information From QTY Column To PartQty Column
Oct 17, 2013In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedAutoCAD Inventor :: Ipart - Standard Parameter Column Change Depending On Custom Parameter Column
Jan 3, 2013I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
AutoCAD Inventor :: Hiding Bodies In A Drawing?
Jun 28, 2012I have created a part with multi bodies (concrete block with reo bar), in the drawing I want a view that shows just the reo bar - concrete hidden. Can this be done?
View 2 Replies View RelatedAutoCAD Inventor :: Hiding Features In One View
Nov 29, 2012I am making a multiview drawing with isometric of a certain sheet metal part. Due to manufacturing reasons, they have to make the part longer than necessary to get a bend in it then I will have them shear off the extra. Is there a way I can show the multiview and flat pattern WITH the extra material and show the isometric WITHOUT that extra? In the model I remove the excess with a cut but I don't know how to suppress a feature for one view and not another.
View 2 Replies View RelatedAutoCAD Inventor :: Hiding Features In One View Of IDW
Jul 17, 2013I am trying to hide an extruded cut in one view of my .idw. I have tried supressing in one view but this does not work. I need to show a before and after of this cut in the same model. I can not make two models because this is a controlled document.
View 5 Replies View RelatedAutoCAD Inventor :: Hiding Extrusion (cut) In Assembly
May 17, 2012I am working on detailing an assembly that requires two parts to be bolted together and then have a hole bored through both parts. I want to show the assembly without the bore and then with the bore. I do not want to have to create a derived part. There should be a way of toggling this extrusion in the assembly view, but I have not yet found it.
View 4 Replies View RelatedAutoCAD Inventor :: Hiding Sketch Or Changing Lineweight?
Dec 26, 2012(Image attached). I am using Inventor 2013 and Visual Basic 2010 Express. I created a sketch within one of my views on my .idw. I would like to turn this sketch on or off based on the input from a variable that is read elsewhere. I have used the following code from the help file with no luck so far.
Public Sub SketchEdit() Dim oDrawDoc As DrawingDocument oDrawDoc = _invApp.ActiveDocument ' Determine if there are any sheet overlay sketches. Dim oSketches As DrawingSketches oSketches = oDrawDoc.ActiveSheet.Sketches If oSketches.Count = 0 Then Exit Sub End If ' Set a reference to the first sketch. Dim oSketch As DrawingSketch oSketch = oSketches.Item(4) oSketch.Edit() If vValue_Closer = "" Then oSketch.LineWeight = 0 Else oSketch.LineWeight = 0.007 End If ' Return from edit mode. oSketch.ExitEdit() End Sub
The code errors out on the line 'osketch = osketches.item(4)'. I have tried using a number like that, and I have also tried using the actual name of the sketch. Neither works.
oSketch = oSketches.Item("Closer_Reinf")
what to edit here to get it to look at my Closer_Reinf sketch to hide it/unhide it ?
AutoCAD Inventor :: Hiding Drawingcurves In Assembly Drawingview Through API
Aug 22, 2011I want to hide some drawingcurve in my assembly drawingview,but can't make it.
My code is as follows:
Public Sub HideDrawingcurves()
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Set oSheet = oDoc.ActiveSheet
Dim oDrawingCurve As DrawingCurve
Set oDrawingCurve = oDoc.SelectSet.Item(1).Parent
oDrawingCurve.Visible = False
End Sub
I'm reminded that there is no such method as the bolded .How to hide or delete drawingcurves
AutoCAD 2013 :: How To Change Name From Column To New Column
Oct 21, 2013my drawing file , have block name 'column' but i want to change name from column to new column.
View 2 Replies View RelatedAutoCAD Inventor :: Speed Up Part List Hiding Process?
Jul 10, 2012I'm writing code to split long part list in new sheets. Infact it's finished but very slow. Because each time I hide the line part list start to refresh itself...
I tryed to use
oDoc.DrawingSettings.DeferUpdates = True
But in this case I can only see empty part list on each page?!...
I just want to speed up process and I want to refresh part list view after than hiding process finished completely...
AutoCAD Inventor :: Allows Hiding Of DIMENSION Lines And ARROWS In IDW Files?
Sep 23, 2011Inventor 2010 suite
If IV2010 allows hiding of the DIMENSION lines and ARROWS in an IDW files? I found a thread from 2009 that says it is impossible.
However, I found a way to hide them on some RETRIEVED dimensins, but not on others.
How to MANUALLY, or to create STYLE that hides MY choice of:
1. EXTENSION LINES,
2. DIMENSION LINES,
3. ARROWS
AutoCAD Inventor :: Hiding Solid In Drawing For A Single Part File
Feb 1, 2012I have a part file that contain 7 separate solid. But in the drawing i want to show only 4 solids.
For this reason i put invisible command to other 3 solids in the part file . but in the drawing, i still see all the seven parts.
AutoCAD Inventor :: Add IPart Column?
Nov 21, 2009Is there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies View RelatedAutoCAD Inventor :: Add A Column To A Partslist
Jul 28, 2005I need to add a custom column to a parts list and have it display as the last column.
oPartsList.PartsListColumns.Add (kCustomProperty)
This code runs, but nothing happens...no error...no column..
AutoCAD Inventor :: BOM Column Customization?
Oct 4, 2012Is there a way to customize the BOM columns so that Inventor remembers which columns I need? I know that I can add in the file name column etc. but I use the same columns over and over. I find myself in every assembly adding these columns in.
Autodesk Inventor Professional 2010
Revit :: Slanted Column Meets Beam / Column Joints
Feb 7, 2012I have a problem inserting the slanted columns when I use the "Beam/Column joints" commando. When I insert the slanted column, the beams are divided.
It should look like picture 1, but it always ends up as image 2. How can I solve this?
AutoCAD Inventor :: FEA And Beam Column Calculator?
Mar 18, 2012When I try to calculate bending moment stress thru "Beam and column calcultor it shows an error that is Wk and Jk is missing. Ok that is fine. If we put values for both we will get the answer. Because I have come to know thru inv discussion that many material in the CC do not have these values.
Now my question is when we insert a part for example from content centre (CC) and do FEA analysis on this part. It shows some values like deflection, stress etc etc. How is that possible? one side it is not doing in the beam calculatio but other side in FEA it is doing that.
It means we are not going to rely upon these results in the FEA. It is the same CC, same inventor, how should be trust the result in FEA.
AutoCAD Inventor :: Parameter Equation Column
Sep 23, 2013how can i access the value in this column using vba?
View 1 Replies View RelatedAutoCAD Inventor :: Global SIZE Column In BOM Possible?
Feb 7, 2013I have written code to allow me to pick the dimensions of a part and update the dimension parameter name from a list of choices presented in a form e.g. length, width, thickness, outer_diameter, wall etc.
The parameters are exported and I can get overall sizes in the BOM with relevant expressions in columns. So far so good.
What I would like to do is have a global SIZE column in the BOM which has expressions that vary based on another custom iproperty (PartType) which defines the part. So for example if the PartType was 'circular plate' the expression in that parts row of the SIZE column would be <outer_diameter>x<Thickness> while if the PartType was 'tube' the expression in the that parts row would be <Outer Diameter>x<Wall>x<Length> etc
If I could do this I would not need different columns to define the sizes of every different type of material we use and also limit the number of parameters the user needs to choose from when picking part dimensions.
However looking at the BOM API I do not see an obvious way to alter the expressions.
AutoCAD Inventor :: Multiple Units In A BOM Column
Aug 2, 2013I have a BOM that shows up as in units for length items and unitless for qty items. When I change the UOM to use FT units the non-length units get inch ticks. The qty 1 which means I need one shows up as 1" where I do not require a 1 inch part but one each. How do I remove the inch ticks?
View 5 Replies View RelatedAutoCAD Inventor :: How To Get Column For Second Dimension To Display A Value
Jan 4, 2008I'm detailing an iPart. Only two dimensions need to be included in the table. One is the driving dimension and the second is a function of the driving dimension. How do I get the column for the second dimension to display a value, rather than an equation?
Inventor Routed Systems 2010
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
AutoCAD Inventor :: Method For Seeing If Column Is Present In BOM View?
Jun 3, 2013I've seen things about getting the information from the parts in the BOM list, but not about seeing what is present in the structure itself
View 1 Replies View RelatedAutoCAD Inventor :: Unknown Error Within BOM Quantities Column?
Jul 14, 2009In five years using Inventor I've never seen this- I can't get it the parts list or BOM to register the quantities. Each box comes up with "Unknown Error" and it will not allow manual override to update those quantities.
View 8 Replies View RelatedAutoCAD Inventor :: CC - Mapping Column Properties To IProperties?
Jun 18, 2012I have copied a standard "L" to my custom library. Now I would like to map the properties for the CC parts to be like my other parts that are not created in CC. One of the things I need is the "Title" and "Description" iproperty fields need to be the sectional size, i.e. L3x2x3/16, L4x4x3/8....etc.
To do this, I went into the editor and created a column. I mapped this column to Project.Description (see image)
why this does not work? When I create a new part and look at the BOM, I only see "Angled Steel" in the description iproperty field (see image below)
I did the same thing with the "Title" field and the "Project" field. Those work great.... just can't make teh Description field happen.
This is with Inventor 2011.
AutoCAD Inventor :: BOM Adding Custom Column View?
Jan 6, 2012I have a program that create a bunch of new custom Iprop in each part of an assembly.
How can I show all those new properties when I open the BOM in the assembly file. Manually I can add a custom column but that is time consuming. Is there a way I can create a macro that will add those custom column in the BOM view?
AutoCAD Inventor :: Parts List Column Properties?
Aug 30, 2013I need to create a column in a partslist that reads IDENTIFYING NO. instead of the factory PART NUMBER title. When i create the new property in the column chooser dialog box how do i get inventor to pull the PART NUMBER from iprops over to the IDENTIFYING NO. column.
View 4 Replies View RelatedAutoCAD Inventor :: How To Delete Custom Iprop Column From BOM
Feb 7, 2011I have an assembly with a custom iproperty column that filled a need that has recently been removed. How do I delete the column from the BOM editor? I realize the iProp will still exist in the part files, I just want it gone from the BOM editor when I open it. I thought I could just delete it from the "Add Custom iProperty Columns" button but no dice.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
AutoCAD Inventor :: Show Column Location In A Plan
Sep 14, 2012I need to show column locations in a Plan (overhead) view. The columns are so small that they don't show up very well. Is there an "automagic" (I'd prefer not to have to manually place some kind of sketched symbol on each columns linework) way to do a PART REP (so-called) in a drawing?
I'm using 2012 Premium.
AutoCAD Inventor :: Add Single Column To Multiple Items
Jan 9, 2012A quick way to add a single column to multiple items in the Content Center? The column would be the same across the board, and I really don't want to edit several hundred family tables one at a time if I don't have to.
View 2 Replies View RelatedAutoCAD Inventor :: Command To Add Values In Column In Part List
Sep 13, 2012Is there a command in Inventor to add values in a column in the Part list ( BOM) and to display a total value bottom like the Grand Total in Revit?
View 2 Replies View Related
