I have a BOM that shows up as in units for length items and unitless for qty items. When I change the UOM to use FT units the non-length units get inch ticks. The qty 1 which means I need one shows up as 1" where I do not require a 1 inch part but one each. How do I remove the inch ticks?
View 5 RepliesA quick way to add a single column to multiple items in the Content Center? The column would be the same across the board, and I really don't want to edit several hundred family tables one at a time if I don't have to.
View 2 Replies View RelatedIn Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedI am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
I am using AutoCAD 2011, there are new options of "no columns" "dynamic columns" and "static columns" for multiple text. I am used to "No columns" but it seems to be set to "Dynamic columns" by default, wonder if there is any setting to change default to "No columns". Or any Lisp can be used.
View 1 Replies View RelatedI'm enlisted in the United States Air Force and am working with the Navy for topo surveys. I'm bringing my information into AutoCAD Map 3D 2010 and using the coordinate system UTM84-4N. I can't figure out why when I bring in my survey .dwg, all of the points are in the middle of the ocean.
I've tried to manually project the coordinate systems onto each file and reference them. I've changed units to meters. I've copied with base point 0,0 and pasted as the same. I've even opened a fresh file, gave that a projection, imported the drawing from "Map Explorer" and queried "ALL" and redrew the file and still nothing. I've checked the Geo-Markers and they're obviously off. Is there a way to match them and have it scaled properly?
1) I am working with a 960 px website grid from
[URL]
they have an Illustrator file very useful to work with columns and grids. Howerver i cannot manage to paste the pink grid and columns to the next Artboard. I unlocked but that is not the solution. It seems the column grid is made from something else like a Path.
2) By the way, InDesign has a very cool feature named "Paste in Place" which will paste any object to next page in the exact position. Does Illustrator has something like that?
my drawing file , have block name 'column' but i want to change name from column to new column.
View 2 Replies View RelatedIs there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
Is there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies View RelatedIs it possible to have a column in the BOM but i do not want to show it on the drg.
like you can do it for rows for example...
I need to add a custom column to a parts list and have it display as the last column.
oPartsList.PartsListColumns.Add (kCustomProperty)
This code runs, but nothing happens...no error...no column..
Is there a way to customize the BOM columns so that Inventor remembers which columns I need? I know that I can add in the file name column etc. but I use the same columns over and over. I find myself in every assembly adding these columns in.
Autodesk Inventor Professional 2010
I have a problem inserting the slanted columns when I use the "Beam/Column joints" commando. When I insert the slanted column, the beams are divided.
It should look like picture 1, but it always ends up as image 2. How can I solve this?
When I try to calculate bending moment stress thru "Beam and column calcultor it shows an error that is Wk and Jk is missing. Ok that is fine. If we put values for both we will get the answer. Because I have come to know thru inv discussion that many material in the CC do not have these values.
Now my question is when we insert a part for example from content centre (CC) and do FEA analysis on this part. It shows some values like deflection, stress etc etc. How is that possible? one side it is not doing in the beam calculatio but other side in FEA it is doing that.
It means we are not going to rely upon these results in the FEA. It is the same CC, same inventor, how should be trust the result in FEA.
how can i access the value in this column using vba?
View 1 Replies View RelatedI have written code to allow me to pick the dimensions of a part and update the dimension parameter name from a list of choices presented in a form e.g. length, width, thickness, outer_diameter, wall etc.
The parameters are exported and I can get overall sizes in the BOM with relevant expressions in columns. So far so good.
What I would like to do is have a global SIZE column in the BOM which has expressions that vary based on another custom iproperty (PartType) which defines the part. So for example if the PartType was 'circular plate' the expression in that parts row of the SIZE column would be <outer_diameter>x<Thickness> while if the PartType was 'tube' the expression in the that parts row would be <Outer Diameter>x<Wall>x<Length> etc
If I could do this I would not need different columns to define the sizes of every different type of material we use and also limit the number of parameters the user needs to choose from when picking part dimensions.
However looking at the BOM API I do not see an obvious way to alter the expressions.
I'm detailing an iPart. Only two dimensions need to be included in the table. One is the driving dimension and the second is a function of the driving dimension. How do I get the column for the second dimension to display a value, rather than an equation?
Inventor Routed Systems 2010
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
I've seen things about getting the information from the parts in the BOM list, but not about seeing what is present in the structure itself
View 1 Replies View RelatedIn five years using Inventor I've never seen this- I can't get it the parts list or BOM to register the quantities. Each box comes up with "Unknown Error" and it will not allow manual override to update those quantities.
View 8 Replies View RelatedI have copied a standard "L" to my custom library. Now I would like to map the properties for the CC parts to be like my other parts that are not created in CC. One of the things I need is the "Title" and "Description" iproperty fields need to be the sectional size, i.e. L3x2x3/16, L4x4x3/8....etc.
To do this, I went into the editor and created a column. I mapped this column to Project.Description (see image)
why this does not work? When I create a new part and look at the BOM, I only see "Angled Steel" in the description iproperty field (see image below)
I did the same thing with the "Title" field and the "Project" field. Those work great.... just can't make teh Description field happen.
This is with Inventor 2011.
I have a program that create a bunch of new custom Iprop in each part of an assembly.
How can I show all those new properties when I open the BOM in the assembly file. Manually I can add a custom column but that is time consuming. Is there a way I can create a macro that will add those custom column in the BOM view?
I need to create a column in a partslist that reads IDENTIFYING NO. instead of the factory PART NUMBER title. When i create the new property in the column chooser dialog box how do i get inventor to pull the PART NUMBER from iprops over to the IDENTIFYING NO. column.
View 4 Replies View RelatedI have an assembly with a custom iproperty column that filled a need that has recently been removed. How do I delete the column from the BOM editor? I realize the iProp will still exist in the part files, I just want it gone from the BOM editor when I open it. I thought I could just delete it from the "Add Custom iProperty Columns" button but no dice.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I need to show column locations in a Plan (overhead) view. The columns are so small that they don't show up very well. Is there an "automagic" (I'd prefer not to have to manually place some kind of sketched symbol on each columns linework) way to do a PART REP (so-called) in a drawing?
I'm using 2012 Premium.
Our school rercently updated to Inventor 2014, When working starting a new assembly we seslect the standard mm ipt icon, however as soon as you create a new compont it defaults to inches, we can change the units using styles editor, but this only changes this componont when you create another part it also defaults to inches.
Can you change the setup so that it will always be in mm.
I created an idw and annotated all the dimensions in default to inches. Is it possible to switch all of the units from inches to mm at one time? If so, how?
View 2 Replies View RelatedIs there a command in Inventor to add values in a column in the Part list ( BOM) and to display a total value bottom like the Grand Total in Revit?
View 2 Replies View Relatedi want to export my part list with ilogic in a excel template but dont want all the part list column and dont erase the column i skip in excel?
View 3 Replies View RelatedaIs there a way to Format the Column Header to wrap text & rotate text if necessary? I would prefer if I could only Format the QTY Column Headers, but leave the others s is.
View 2 Replies View RelatedHow to add a volume column to ipart author table?
Evantually I need to display a table with part weights.
Inventor Professional 2013
Vault Collaboration 2013