In five years using Inventor I've never seen this- I can't get it the parts list or BOM to register the quantities. Each box comes up with "Unknown Error" and it will not allow manual override to update those quantities.
View 8 RepliesAttached is a surface model with parameters which drives an assembly I have. I was testing it by changing dimensions to see where failures in the main assembly occured. It worked for a few changes so I saved it and checked it into vault.
The Split using the 70 Deg Plane (you will find them in the browser, Split 5 and Split 7) is where the problem occurs. When I increase the outside diameter (i made it 147 in.), Spits 5 and 7 get moved up to the top half.
The same surface (named OUTER HOUSING SIDE) and its mirror are split on the XZ plane prior to the splits in question (5 and 7).
I copied an existing family into my new read library. I added some rows to be able to generate a few variations that were not contained in the original family. I just copied existing row up several times and edited the information in those rows to yield desired new variations. I made sure the file name column contained a unique file name for these new members. When I go to publish I get this error message:
Defined file name does not include all custom columns. An identical file name can be generated for different members. Make sure that the file name is unique for any combination of custom column values to avoid placement failure
Missing Custom Columns:
Length
(see also attached screen shot)
I have scoured the file name column and can find no repeated file names; I cannot understand the rest of the error message. It must have something to do with the "does not include all custom values" portion of the error message.
In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedI receive this error (sometimes) on shutting down AutoCAd Architecture but what it may represent.
View 5 Replies View RelatedI get this common exception while debugging right after I close AutoCAD. I have not even run any commands that belong to my project, just open AutoCAD and Close AutoCAD.
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 1 (Access Violation Reading 0x89a63aa8) at address 775E32D0h --------------------------- OK ---------------------------
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 80000003 (80000003h) at address 776540BFh --------------------------- OK ---------------------------
Call Stack:
[In a sleep, wait, or join] > mscorlib.dll!System.Threading.WaitHandle.WaitAny(System.Threading.WaitHandle[] waitHandles, int millisecondsTimeout, bool exitContext) + 0xb6 bytes System.dll!System.Net.TimerThread.ThreadProc() + 0x2d6 bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool ignoreSyncCtx) + 0xdc bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state) + 0x3b bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart() + 0x4d bytes [Native to Managed Transition]
I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
I have a purchase component set that includes 2 identical pcs. i.e. part number xxx01(.iam) consists of part01(.ipt) and part01(.ipt). Typically I would place xxx01(.iam) into an upper level assembly, and get a BOM count of xxx01 QTY = 1. This works fine.
Now I have a similar component xxx02(.iam) that includes part02(.ipt) and part02(.ipt). With this component I use only half of the purchase component set in many instances. Therefore I would like to have the ability to place part02(.ipt) as a single part and have a BOM count of xxx02 QTY = 0.5.
The best solutions I have found is either to place xxx02(.iam) and manually override the BOM count to 0.5, which is error prone, and inevitably causes an issue each time.
Or I can set the Part Number of part02(.ipt) to be xxx02, and create a User Parameter in part02(.ipt) called BOM_QTY and set it to 0.5 ul and then set the Unit Quantity (using the BOM tab of the part file's Documents Settings) to use the User Parameter. The result of this is a BOM count of xxx02 QTY = 0.5ul.This method displays ul in the Parts List, which of course is an issue as well.
How do you show associated BOM quantities on balloons in the drawing?
View 7 Replies View RelatedMy company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
Is there a quick way to revert an edited BOM back to the original quantities before they were edited?
View 2 Replies View RelatedIs there a way to have the parts list filter to show only the visible parts from the view representation, especially the quantities? I thought that was what the filter is for. And if not then what is the filter used for?
IV 2012 sp1
I have an assembly consisting of both sub assemblies and individual parts.When I insert the bill, it is only showing me the parts and assy's needed to build the assembly.Is there a way to have it list the sub assemblies and then their lower level parts, with quantities?
View 2 Replies View RelatedInventor 2012.how would I input the total quantity of doors in the .iam in order to update the Parts List quantity column? I have a lot of user inputs in the .iam file set up to change width, height, etc that are based off of Parameters in the .iam, but I don't know how the user can enter assembly quantities in order to get the Parts List to update the Quantity column correctly?
I have attempted using custom iProperties but how to get it to display based off a user input Parameter.
I get an unknown graphics processor error when I try to use Oil Paint filter. I have been able to use this feature before and all my devices are up to date.
View 6 Replies View RelatedRecently I found that I couldn't import a .bip file onto my CAT rig. Here's the error message:
Unknown system exception
and highlights the following line of code:
local liindex = FindCATNode catNode;
I've tried several things and copy/pasting the error to google only gives a single page of results, with very few possible solutions. There was one saying I should replace the highlighted code with a different piece of code and restart max. this just changes the error message.
Another solution was to get max 2011 32 bit, save it there and open it up in 2012, however other posts had the exact same problem with importing 2011 files into 2012. so that also doesn't seem like a working solution.
That's about when I reached the end of the page... Could it be that importing the original BVH onto a biped and exporting the animation to .bip caused the .bip file to get corrupt or something? I've tried loading the BVH file onto my CAT rig directly, but this just crashed max.
Illustrator won't let me save! It says "Unknown error has occured." I only have line work and text I placed from AutoCAD as a DWG file on the artboard and I was going to color the rooms in Illustrator.
View 1 Replies View RelatedWe work on PC's with CS5 installed on approximately 7 seats. One artist posted this error message asking what do you do when you see this? Well now I'm seeing this message. Not funny. The problem started when I attempted to paste an template into a blank document. There was a conflict between swatches. I'm not sure how many there were, around 200 or so. Each one requireing me to click OK.
View 9 Replies View RelatedStarting yesterday I now get the above error message when clicking anything on any open Illustrator file (CS5 - Mac). Wondering if it's something I did or a corrupt pref file or what? How should I resolve this or what can I check?
View 8 Replies View RelatedI get an error "The operation cannot complete due to an unknown error" when I copy paste ax XL graph from MS excel to Illustrator CS6. This happens only when I paste the graph created in Win7 but when I paste the graph created in XP, it doesn't throw any error and works fine. why get this error only with the graph sheets created in Win7
View 3 Replies View RelatedWe've been experiencing an issue with saving illustrator files (as .ai). The error message is "unknown error occurred" when attempting to save. Things tried already:
delete preferences file
uninstall/re-install CS6
standardize all fonts to arial
save in another location (desktop, network)
save as .eps
But still same.
This happens when copying components of one ai file to another and trying to save it. Found that removing one tiny piece from a drawing allows the save.There is no text in that piece, just lines and shading.
Sometimes I get a MAXScipt Callback script error – Unknown property Modifier. Everything seems to work fine with this message popping up but it’s just annoying.
3ds Max 2013/2014
Autodesk Inventor & AutoCAD
HP xw8600 Workstation
Windows 7 64Bit
Dual Intel Xeon 2.83 E5440 GHz
8.00 GB of Ram
I am working on a scene in Maya 2011 as a Maya binary and can open the scene up in Maya 2012 as a binary without any problems. But, when I save the file in Maya 2012, I can no longer open it in Maya 2011.
I've read in the forums that I can save it as a Maya ASCII file and have better luck transferring between Maya versions but I cannot get Maya 2011 or 2012 to save the scene as a Maya ASCII file.
I get the following error: // Error: File contains unknown nodes or data. To preserve this information, the current file type cannot be changed.
I've tried "Ignore Version" on when opening and have deleted all all by type/non-deformer history but no luck.
I'm attempting to export out an animation clip and got the above error. A similar post years back and said it was a plugin issue. But nor sure which plugin I might have turned off.
By the way, Steps performed prior to"
Selected mesh and rig (contains IKFK nodes)> Generated character set "walk", ect Then while still selected, Edit>Keys> Baked Simulation Then from the graph editor and the character selected, File> Export Animation Clip....that's when I get the error.
I think I covered the steps correctly. Maybe I'm missing something?
You more experiance animators/riggers might be able to shed some light on this modeler.
I recently upgraded to CS6 and cannot open any past files in CS6 from CS5. Everytime I try I Get "Unknown Error has Occurred"
View 2 Replies View RelatedI have both 32- and 64-bit versions of Adobe Illustrator CS6 The error occurs only with the 64-bit version,The error occurs only when saving files containing text objects.Unchecking "Create PDF Compatible File" doesn't solve the problem. Resetting Illustrator's settings also doesn't work.
It's pretty much time taking switching between the two versions and I also have files pretty big enough that require opening in the 64 bit version.
I'm using a macBook pro with retina display runing Mac OS X 10.8.3. When I try to use Brush libraries I get "an unknown error has occured".
View 2 Replies View RelatedI am not able to save my files and illustrator gives the message 'An Unknown Error has occured'. In a previous discussion transparency is called out as the culprit however I am not using transparency in my document and have checked all the items. I have also tried copying the work into a new ai file however this also will not save. This is has happened to me about 5 times since I updated to CS6.
Update - I just closed Illustrator and lost all my work and then an Adobe update window showed up asking me to update Adobe Air. I recall an Adobe Update window appearing once before when I had problems solving. Could the Adobe update window interfere or prevent me from saving my documents?
Trying to troubleshoot a weird issue w/ Lightroom 5.3 on a PC. Updated my current catalog and wanted to import a couple of old catalogs to consolidate images. The first two of the old catalogs updated and imported just fine, previews were merged, data seamlessly integrated -- all good. But the third catalog is giving me no end of grief. It goes through the update process to be LR5 compatible, but when I say "import everything" on the list of found images/folders, it tries for a bit, then fails out with "unknown error". This happens regardless of what I pick from that catalog -- even a single folder. It also happens if I export a sub-catalog from the old catalog and try to import that. But the updated catalog runs just fine on its own.
I've tried optimizing the offending catalog and checked for any possible issues with folder names, missing images, incompatible formats etc. etc.
I'm reluctant to try the "reverse" operation and import my main catalog back into the old, "challenged" catalog for fear of future corruption.
I use lightroom to edit the timelapses I shoot and it works brilliantly with the sync setting. But my problem is I use presets that call for the slideshow to move at 24 fps, 26fps, 30fps etc. and some of these time lapses contain over 300 photos and whenever I try to export the timelapse as a video from the slideshow module about an 8th of the way into the progress bar it stops and a message comes up that says "unknown error occurred" So my question would be: Is there a maximum number of slides you can have in a slideshow and is that what's causing this to happen?
View 2 Replies View RelatedI have been having a problem with Photoshop crashing.It seems to be (may be) triggered by using the pattern "Pattern Overlay" option in the Layer Style dialog box. When I click on the pattern thumbnail to bring up the full range of loaded patterns.
Photoshop then seems to activate Photoshop Online Help, despite not being prompted to do so.I have two screen shots of the error messages which I am presented with. Unfortunately I seem to be unable to upload them to this message (I am using Chrome). This is another error to flag maybe?
One of the errors says, "Photoshop.exe - Application Error: The exception unknown software exception (0x40000015) occurred in the application at location 0x660561c9."The second error says, "Layer Style - Photoshop Online Help could not be displayed because you are not connected to the internet."
My system info is detailed below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2893 MHz
[code]....