AutoCAD .NET :: Unknown Error When Closing 2013
May 3, 2012
I get this common exception while debugging right after I close AutoCAD. I have not even run any commands that belong to my project, just open AutoCAD and Close AutoCAD.
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 1 (Access Violation Reading 0x89a63aa8) at address 775E32D0h --------------------------- OK ---------------------------
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 80000003 (80000003h) at address 776540BFh --------------------------- OK ---------------------------
Call Stack:
[In a sleep, wait, or join] > mscorlib.dll!System.Threading.WaitHandle.WaitAny(System.Threading.WaitHandle[] waitHandles, int millisecondsTimeout, bool exitContext) + 0xb6 bytes System.dll!System.Net.TimerThread.ThreadProc() + 0x2d6 bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool ignoreSyncCtx) + 0xdc bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state) + 0x3b bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart() + 0x4d bytes [Native to Managed Transition]
View 3 Replies
ADVERTISEMENT
Sep 28, 2011
I receive this error (sometimes) on shutting down AutoCAd Architecture but what it may represent.
View 5 Replies
View Related
Jul 14, 2009
In five years using Inventor I've never seen this- I can't get it the parts list or BOM to register the quantities. Each box comes up with "Unknown Error" and it will not allow manual override to update those quantities.
View 8 Replies
View Related
Oct 26, 2012
Attached is a surface model with parameters which drives an assembly I have. I was testing it by changing dimensions to see where failures in the main assembly occured. It worked for a few changes so I saved it and checked it into vault.
The Split using the 70 Deg Plane (you will find them in the browser, Split 5 and Split 7) is where the problem occurs. When I increase the outside diameter (i made it 147 in.), Spits 5 and 7 get moved up to the top half.
The same surface (named OUTER HOUSING SIDE) and its mirror are split on the XZ plane prior to the splits in question (5 and 7).
View 5 Replies
View Related
Aug 14, 2012
Today 2013 returns "Command: _cui Unknown command "CUI". Press F1 for help." from the command line. menu and ribbon. What a mess 2013 is! Defeitely not worth the miniscule improvements.
View 5 Replies
View Related
Sep 30, 2013
I am using Inventor 2014. I am receiving an error while closing a drawing. The error says "One or more drawings are being computed and are currently in raster state. The document(s) may be closed and pending updates will resume when the document is reopened.
Do you wish to continue closing?"
The drawing shows outdated views which I tried updating but they do not update. When I am trying to print the drawing, it shows incomplete drawing.
View 8 Replies
View Related
Jan 29, 2013
I installed the language pack, on my original autocad 2013(Chinese) has the ribbon, and the "RIBBON"command works, but on my another language pack autocad 2013 (English) there is no ribbon and the"RIBBON" command does not work, tells me ribbon Unknown command "RIBBON".
Does the ribbon function not work on the language pack autocad one?
View 6 Replies
View Related
Sep 2, 2011
My company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
View 5 Replies
View Related
Jun 26, 2013
while working on a new file, which only has our 4 standard textstyles, something happened at some point during the work period where multiple textstyles named "AUDIT_1_12030....." and counting up appeared. over 40 of them.
they are all somehow embedded within the each object in the file, even lines, which confuses me. Noweven if i wanted to just copy most of the project excluding blocks, dims, leaders and text, (which was my original assumption that the textstyles were in there somewhere), I cant. I usually am able to remove unwanted textstyles through the TXTMRG LISP/VBA macro. It has no effect this time.
View 9 Replies
View Related
Feb 14, 2013
I have AutoDesk 2013 install on my computer and when I use MVSETUP, "Unknown Command" show up.
View 6 Replies
View Related
Feb 22, 2013
I'm new to AutoCAD and can't seem to find a solution. Essentially I'm trying to create an arc between two points on the X-Y plane and a point above (not directly above) in the Z direction.
Is there any way I can get an arc to snap between these three points? I guess I could calculate the angle of the plane this arc would lie on and then rotate the UCS to this angle, but this seems like a very long and inaccurate way of doing it. I've tried drawing an arc on the X-Y plane and then stretching the centre of it to the desired point above using the grips, but AutoCAD doesn't seem to want to allow this.
View 2 Replies
View Related
Oct 1, 2012
I just had to replace my desktop computer, reinstalled AutoCad, set it up using a saved profile, everything was working fine until this morning when I came in and most of my buttons on the toolbars return "Unknown Command". Now even when I type in the command on the command line it doesn't recognize the commands. ie _layfrz Unknown command "LAYFRZ) I've gone in and "repaired" the program, shut down the computer for a full restart, to no avail.
View 3 Replies
View Related
Jul 4, 2012
I am using iLOgic on Inv 2012 to try and close the active document using the following piece of code -
InventorVb.Application.activedocument.Close (True)
This close the document but brings up the following Error msg...
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
Any better piece of code that shuts down the active document but doesn't return the error? (I only want to shut down one document, not the application)
View 3 Replies
View Related
Jul 20, 2010
I am operating 3D Civil with Windows 7, 64-bit system.
Most of the time when I close a drawing, particularly when I have two or more drawings open, the program closes down with the following message "Autocad Application has stopped working - Windows is collecting more information about the problem"
I then have to restart 3D Civil
View 7 Replies
View Related
Jul 4, 2013
[URL] Basically, when I accidentally input a typo into the command line there is a massive lag before AutoCad comes back to life. Nearly three seconds.
This happens on our AutoCad 2014 LT installations too.
I have all the predictive/corrective command line features turned off.
I have also uninstalled 360 and online content services, prior to the problem, to no avail.
Our office internet is proxied, and there are no ports opened for any Autodesk products.
It's losing us valuable seconds / minutes / days / weeks / months, depending on how you look at it.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (332.21 Driver) 24Gb Ram Corsair 650w PSU
View 9 Replies
View Related
Oct 6, 2012
I get an unknown graphics processor error when I try to use Oil Paint filter. I have been able to use this feature before and all my devices are up to date.
View 6 Replies
View Related
Apr 13, 2012
Recently I found that I couldn't import a .bip file onto my CAT rig. Here's the error message:
Unknown system exception
and highlights the following line of code:
local liindex = FindCATNode catNode;
I've tried several things and copy/pasting the error to google only gives a single page of results, with very few possible solutions. There was one saying I should replace the highlighted code with a different piece of code and restart max. this just changes the error message.
Another solution was to get max 2011 32 bit, save it there and open it up in 2012, however other posts had the exact same problem with importing 2011 files into 2012. so that also doesn't seem like a working solution.
That's about when I reached the end of the page... Could it be that importing the original BVH onto a biped and exporting the animation to .bip caused the .bip file to get corrupt or something? I've tried loading the BVH file onto my CAT rig directly, but this just crashed max.
View 2 Replies
View Related
Feb 21, 2014
Illustrator won't let me save! It says "Unknown error has occured." I only have line work and text I placed from AutoCAD as a DWG file on the artboard and I was going to color the rooms in Illustrator.
View 1 Replies
View Related
Mar 12, 2013
We work on PC's with CS5 installed on approximately 7 seats. One artist posted this error message asking what do you do when you see this? Well now I'm seeing this message. Not funny. The problem started when I attempted to paste an template into a blank document. There was a conflict between swatches. I'm not sure how many there were, around 200 or so. Each one requireing me to click OK.
View 9 Replies
View Related
Sep 20, 2011
Starting yesterday I now get the above error message when clicking anything on any open Illustrator file (CS5 - Mac). Wondering if it's something I did or a corrupt pref file or what? How should I resolve this or what can I check?
View 8 Replies
View Related
Feb 5, 2014
I get an error "The operation cannot complete due to an unknown error" when I copy paste ax XL graph from MS excel to Illustrator CS6. This happens only when I paste the graph created in Win7 but when I paste the graph created in XP, it doesn't throw any error and works fine. why get this error only with the graph sheets created in Win7
View 3 Replies
View Related
May 23, 2013
We've been experiencing an issue with saving illustrator files (as .ai). The error message is "unknown error occurred" when attempting to save. Things tried already:
delete preferences file
uninstall/re-install CS6
standardize all fonts to arial
save in another location (desktop, network)
save as .eps
But still same.
This happens when copying components of one ai file to another and trying to save it. Found that removing one tiny piece from a drawing allows the save.There is no text in that piece, just lines and shading.
View 2 Replies
View Related
Apr 9, 2013
when i try to copy drawing,''copyclip unkown command' showed up, what should i do
View 1 Replies
View Related
Apr 12, 2013
We sold a customer a new Dell Precision Laptop - i7 16GB Memory, 512GB Solid State hard drive, Windows 7 64bit. He had upgraded to AutoCad 2013 from 2006. Since installing the laptop when he closes out of a drawing Autocad crashes, windows reports that the program had unexpectedly quit. It doesn't do it all of the time, but it could have something to do with multiple drawings, plotting etc, but it's not an easy one to generate. He does have an older plotter - DesignJet 500 that's installed through a network share off of another computer however I did completely remove the printer / driver and the issue was still occuring.
View 2 Replies
View Related
May 9, 2013
Subject pretty much sums it up. AutoCAD will crash 8 out of 10 times when I close a sheet set. This problem just recently started and the only thing I've installed was AutoCAD Map 3D.
View 3 Replies
View Related
Apr 3, 2012
I turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.
View 1 Replies
View Related
Feb 13, 2013
The program shuts down every time I save and close a drawing; this way I am loosing any other drawing that is still open.
I am working on a 64bit Widows7.
View 4 Replies
View Related
Jul 31, 2012
I am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
View 9 Replies
View Related
Jan 18, 2013
We are currently using autocad 2013 LT on windows 7 64bit. The program runs a bit slower than 2012 but the main issue is as follows.
when closing a drawing or multiple drawings (wether they have been recently saved or not) autocad will go into a "not responding" mode and then crash out. This happens at about 70% of the time and is completely random. It may crash a drawing one time but not the next time you are in the same drawing, or when closing multiple drawings may allow you to save some of them when cad closes but then crashes before all of them are saved. We have all of the current updates and fixes. We had the same issue with 2012 but not nearly as often.
View 9 Replies
View Related
Sep 13, 2011
Sometimes I get a MAXScipt Callback script error – Unknown property Modifier. Everything seems to work fine with this message popping up but it’s just annoying.
3ds Max 2013/2014
Autodesk Inventor & AutoCAD
HP xw8600 Workstation
Windows 7 64Bit
Dual Intel Xeon 2.83 E5440 GHz
8.00 GB of Ram
View 4 Replies
View Related
Aug 1, 2011
I am working on a scene in Maya 2011 as a Maya binary and can open the scene up in Maya 2012 as a binary without any problems. But, when I save the file in Maya 2012, I can no longer open it in Maya 2011.
I've read in the forums that I can save it as a Maya ASCII file and have better luck transferring between Maya versions but I cannot get Maya 2011 or 2012 to save the scene as a Maya ASCII file.
I get the following error: // Error: File contains unknown nodes or data. To preserve this information, the current file type cannot be changed.
I've tried "Ignore Version" on when opening and have deleted all all by type/non-deformer history but no luck.
View 1 Replies
View Related
