AutoCAD LT :: 2013 - Crashes When Closing Drawings?
Jan 18, 2013
We are currently using autocad 2013 LT on windows 7 64bit. The program runs a bit slower than 2012 but the main issue is as follows.
when closing a drawing or multiple drawings (wether they have been recently saved or not) autocad will go into a "not responding" mode and then crash out. This happens at about 70% of the time and is completely random. It may crash a drawing one time but not the next time you are in the same drawing, or when closing multiple drawings may allow you to save some of them when cad closes but then crashes before all of them are saved. We have all of the current updates and fixes. We had the same issue with 2012 but not nearly as often.
View 9 Replies
ADVERTISEMENT
Apr 12, 2013
We sold a customer a new Dell Precision Laptop - i7 16GB Memory, 512GB Solid State hard drive, Windows 7 64bit. He had upgraded to AutoCad 2013 from 2006. Since installing the laptop when he closes out of a drawing Autocad crashes, windows reports that the program had unexpectedly quit. It doesn't do it all of the time, but it could have something to do with multiple drawings, plotting etc, but it's not an easy one to generate. He does have an older plotter - DesignJet 500 that's installed through a network share off of another computer however I did completely remove the printer / driver and the issue was still occuring.
View 2 Replies
View Related
May 28, 2012
autocad LT 2008 on windows 7 platform
after using this with only minor crashes for the last year I have now got problems with closing drawings which then locks autocad up and if someone else opens the file in the same program on windows xp then it crashes there program too while closing. I have tried redraw the drawing model file and produce a new drawing sheet exactly the same but it still crashes on saving of the file and have now noticed that any drawing i'm creating now does exactly the same. I have also completely reinstalled autocad LT 2008 to try to fix this problem but with no success. Has there been an update either with windows 7 or autocad that might have caused this problem and how to resolve this problem as I am now left with a computer thats useless to draw upon and rather not install an older version of windows just to resolve this problem after it running fine for over a year now.
View 3 Replies
View Related
Aug 31, 2010
If I have several drawings open at the same time and have done work to some of them, at the end of the day I just pick the AutoCAD application "close" button (the "X" in the top-right corner of the window) and I'm prompted "Save changes to <drawing>?" for each of the drawings.
Unfortunately, most of the times I do this in AC2011, AutoCAD crashes. The next time I open AutoCAD, it initiates the recover but all the changes have been saved in the *.dwg file.
I know this is not the best way to save and close drawings but it has never been a problem.
View 9 Replies
View Related
May 9, 2013
Subject pretty much sums it up. AutoCAD will crash 8 out of 10 times when I close a sheet set. This problem just recently started and the only thing I've installed was AutoCAD Map 3D.
View 3 Replies
View Related
Aug 10, 2012
Since this week we have autocad 2013 installed. Everything works correct except for the saving part , 90 % of the time if we save an drawing it crashes .
Error :
The program acad.exe version 25.0.55.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1134
Start Time: 01cd761edf2b2d93
Termination Time: 15
Application Path: C:Program FilesAutodeskAutoCAD 2013acad.exe
Report Id: 2207e411-e213-11e1-8106-001a4b534618
What we did already ?
- Search on google
- clean install only windows & autocad 2013 installed.
Specs :
- Intel Xeon CPU 5160 @ 3,00 Ghz ( 2 processors )
- 8 GB of memory
- SSD ( Vertex 3 )
- Windows 7 Enterprise 64 Bit
- Autocad 2013
We did alot of research on google but can't really find an solutions , autocad 2012 had no problems with saving files.
Also tried different drawing but even if i start an new drawing and will save it , mostly autocad crashing.
View 9 Replies
View Related
Nov 26, 2013
I am facing problems with my autocad when i import Revit drawing to it. The file start working extremely slow, and crashes often.
View 1 Replies
View Related
Feb 6, 2012
Is there any way to close a drawing that is open on another user's computer, from my computer?
We have a problem with engineers opening a drawing, printing and marking up that drawing, then taking the print to a drafter to make changes to the drawing, but failing to close the electronic drawing file.
Normally, we just call the engineer and ask them to close the drawing. If they were away from their desk, we could just walk over and close the drawing ourselves. Now that's not possible. We have a new security protocol which locks the user's computer after ten minutes of non-use. We each create our own password which we're not supposed to share with others. I just want to be able to log into the server and close a drawing that someone else has open.
View 9 Replies
View Related
Jun 12, 2012
I am losing my dashboard setup when closing drawings/autocad, getting a bit annoying now, having set it back up for the umpteenth time.
View 2 Replies
View Related
Mar 21, 2012
My ACAD 2010 LT crashes about 75% of the time whenever I close a drawing. I’m running Windows 7. System info below:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CAD-PC
System Manufacturer Gigabyte Technology Co., Ltd.
System Model GA-790XTA-UD4
System Type x64-based PC
[code]....
All updates that I can find have been downloaded and installed.
View 7 Replies
View Related
Apr 22, 2011
I frequently have AutoCAD LT crash on me when I close a file. It seems to happen most after I have plotted the drawing.
View 9 Replies
View Related
Jan 12, 2013
After downloading the Autodesk Inventor 2013, I was forced to download the hotfix. I completed the download, and started up Inventor. My force closed crash report directed me to the most updated update, which I then installed to no avail. I've sent an additional crash report, but I've yet to recieve any feedback. When I go to either load the .ipt blank file, or even close the welcome center tab (to be able to access the tools to troubleshoot) It shuts down.
Windows Vista 32-bit
ATI Radeon 3400 HD Series
Intel(R) Core 2 Duo CPU E7300 @ 2.66GHZ X2
View 9 Replies
View Related
May 19, 2011
If I have more than one drawing open at a time, a not infrequent occurrence, when I close one drawing they all close. Before if I closed the drawing I had open, it would leave the other open for me to work on instead of having to re-open the whole CDR application all over again. I have deleted and re-installed several times and installed SP2
View 3 Replies
View Related
May 3, 2012
I get this common exception while debugging right after I close AutoCAD. I have not even run any commands that belong to my project, just open AutoCAD and Close AutoCAD.
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 1 (Access Violation Reading 0x89a63aa8) at address 775E32D0h --------------------------- OK ---------------------------
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 80000003 (80000003h) at address 776540BFh --------------------------- OK ---------------------------
Call Stack:
[In a sleep, wait, or join] > mscorlib.dll!System.Threading.WaitHandle.WaitAny(System.Threading.WaitHandle[] waitHandles, int millisecondsTimeout, bool exitContext) + 0xb6 bytes System.dll!System.Net.TimerThread.ThreadProc() + 0x2d6 bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool ignoreSyncCtx) + 0xdc bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state) + 0x3b bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart() + 0x4d bytes [Native to Managed Transition]
View 3 Replies
View Related
Apr 3, 2012
I turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.
View 1 Replies
View Related
Feb 13, 2013
The program shuts down every time I save and close a drawing; this way I am loosing any other drawing that is still open.
I am working on a 64bit Widows7.
View 4 Replies
View Related
Jul 31, 2012
I am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
View 9 Replies
View Related
Sep 11, 2012
We are experiencing a problem that inventor goes none responsive when closing large assemblies. Typically the problems occurs on assemblies with typrical over 3000 parts. The only way to get out is to manual crash the program.
Our machines are some of the powerful machines that you purchase on the market with SATA III solid state drives so the problem is not with the machines.
Wish we never upgrade from 2012, Autodesk should be embarrassed with the performance of 2013
View 3 Replies
View Related
Apr 12, 2013
AutoCAD 2013, 60-90 days into it, upgraded from 2007.
I have 2 of 4 workstations with this issue, AutoCAD will automtically save the file when the files is closed, w/o any prompts to verify of we want to saved or not.
I have my Options|Autosave turned off, but this should not affect the save on close it should only create a continual ac$ backup file.
This is now the 2nd time this has occured. In early March we noticed this and in dealing with AutoCAD (Suscription Service) we finally deceided to restore AutoCAD to factory defaults, which did fix the issue at the time. However it also meant that I needed to retore all the pathways and our standards. Once completed, I paid particular attention to ensuring that AutoCAD was NOT saving the file on close and it was doing so up until earlier this week, when I noticed it SAVING on close again.
Now most of you might think, hey thats a good thing, however, we routinely will test modifications to our layouts on our working files, but dont want to actually modify those files and then we would simply close the drawing w/o saving thus ensuring that those mods were not saved.
In March, both 2007 & 2013 did this, however only my 2013 is affected now.
View 4 Replies
View Related
Jun 28, 2013
Rscently upgraded from xp to win 8, re installed autocad 2011.
Now when I try to open a drawing from within autocad my system crashes, I get a flash of horizontal lines then two blank screens.
Tried running narrator but just get static through the speakers, I have to hit the re start button to get back in.
I can open a drawing from explorer if autocad is not allready running, autocad starts and the drawing opens with no problems. but if I try to open another drawing we crash.
View 3 Replies
View Related
Sep 29, 2011
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
View 4 Replies
View Related
Feb 26, 2013
Say I have a model and some layouts in a file.
I open the file to the model. My RAM usage is about 33%. Next, I open the first layout and my usage climbs to 43%. I open the second layout and my usage climbs to 52%. I open the third layout and my usage climbs to 62%.
I can go back and view the layouts already opened marginally faster then when first opening them, and my RAM usage will not increase.
If I continue to open new layouts, my computer will spend all its RAM holding these and freeze. My computer will suspend graphical processing and be forced to run on sips of RAM until all active commands are finished. But RAM usage will never decrease.
I have been working with my Windows Task Manager open in the corner, watching this happen. This way, I can save and close the file to clear the RAM and then proceed to reload the file and continue working on my file with 34 layouts.
I do not know if it is a function of storing the UNDO functions, or just how the program is designed, but this is a problem for me.
QUESTION
Is there a way to clear the UNDO or layout memory without closing and reloading the file? I do not have to close AutoCAD - just the file.
ATTACHEMENT
The attachement is a screenshot of my Task Manager.
I started with TM, browser, and AutoCAD open (I had already started writing this post)
I opened the file to the model.
Opened up 6 layouts (you can see the bumps)
Saved (you can see the tiny rise)
Closed the file, but not AutoCAD (precipitous drop ;] )
Lastly, I reloaded the file.
Windows 7 64bit w/ 64bit AutoCAD 2013
View 2 Replies
View Related
Dec 27, 2012
I have a Windows 7 machine running AutoCAD 2013. When trying to open any drawings from our AutoDesk Vault 2013 server, AutoCAD will hard lock/freeze and can only be closed by using Windows Task Manager. When accessing the same files through the Vault first, without opening AutoCAD, they open with no issues.
View 1 Replies
View Related
Jan 9, 2014
I have a block that has to be update in a bunch of drawings -more than 20-. I updated in only one drawing, apply coy paste to the following but the block does not update in the drawing that I am pasting my new block. How is possible to update this block in the following 19 drawings?
View 4 Replies
View Related
Oct 11, 2012
How can i hide the dimensions on the drawing in autocad 2013....screen is cluttered so hiding the dimensions will keep the screen cleaner.
View 2 Replies
View Related
Jul 3, 2013
I just installed Acad v. 2014. I opened up an existing file, went to select a line, but noticed that the line does not highlight when I hover over it like my last version. How do I change the settings so that when I hover over an object, whether it be a line or a cross hatched area, it will highlight that object so I know the length or area of the object?
View 4 Replies
View Related
Nov 6, 2013
I would like to know how to build web configurator from Cad drawings (dwg)?
View 1 Replies
View Related
Jun 26, 2013
When I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies
View Related
Aug 19, 2013
I have a drawing with 72 layouts in it. I also have two drawings with one layout each, that I want to appear in the first drawing. How do I import the layouts from one drawing to the next? I found, "to import layouts as sheets", but it does not seem to be what I need.
View 6 Replies
View Related
Oct 21, 2013
I have recently installed Autocad 2014 and am experiencing very slow and jumpy files when using x-refs. The other machines in the office where I work are not experiencing the same problem and apparently my machine is more powerful.
Originally we thought this might be a network issue (as x-refs are being referenced through the network) but when I put the actual reference files on my computer, I experienced the same issue.
View 2 Replies
View Related
May 28, 2013
We are copying our original files to a sub folder to make revisions that have only happened after bidding. We want to keep our original bid documents intact. I have created a sub folder called 'Confirmed Documents' and added Constructs, Sheets, Elements, etc.
I copied the files over and used the Reference Manager to repath the files. However, all of my schedules and room tags now use the 'NA' prefix because it is not reading the project information. How can i reconnect this folder to the project folder?
View 3 Replies
View Related
