AutoCAD 2013 :: Crashes With Save Drawings?
Aug 10, 2012
Since this week we have autocad 2013 installed. Everything works correct except for the saving part , 90 % of the time if we save an drawing it crashes .
Error :
The program acad.exe version 25.0.55.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1134
Start Time: 01cd761edf2b2d93
Termination Time: 15
Application Path: C:Program FilesAutodeskAutoCAD 2013acad.exe
Report Id: 2207e411-e213-11e1-8106-001a4b534618
What we did already ?
- Search on google
- clean install only windows & autocad 2013 installed.
Specs :
- Intel Xeon CPU 5160 @ 3,00 Ghz ( 2 processors )
- 8 GB of memory
- SSD ( Vertex 3 )
- Windows 7 Enterprise 64 Bit
- Autocad 2013
We did alot of research on google but can't really find an solutions , autocad 2012 had no problems with saving files.
Also tried different drawing but even if i start an new drawing and will save it , mostly autocad crashing.
View 9 Replies
ADVERTISEMENT
Apr 12, 2013
We sold a customer a new Dell Precision Laptop - i7 16GB Memory, 512GB Solid State hard drive, Windows 7 64bit. He had upgraded to AutoCad 2013 from 2006. Since installing the laptop when he closes out of a drawing Autocad crashes, windows reports that the program had unexpectedly quit. It doesn't do it all of the time, but it could have something to do with multiple drawings, plotting etc, but it's not an easy one to generate. He does have an older plotter - DesignJet 500 that's installed through a network share off of another computer however I did completely remove the printer / driver and the issue was still occuring.
View 2 Replies
View Related
Jan 18, 2013
We are currently using autocad 2013 LT on windows 7 64bit. The program runs a bit slower than 2012 but the main issue is as follows.
when closing a drawing or multiple drawings (wether they have been recently saved or not) autocad will go into a "not responding" mode and then crash out. This happens at about 70% of the time and is completely random. It may crash a drawing one time but not the next time you are in the same drawing, or when closing multiple drawings may allow you to save some of them when cad closes but then crashes before all of them are saved. We have all of the current updates and fixes. We had the same issue with 2012 but not nearly as often.
View 9 Replies
View Related
Nov 26, 2013
I am facing problems with my autocad when i import Revit drawing to it. The file start working extremely slow, and crashes often.
View 1 Replies
View Related
Jun 28, 2013
Rscently upgraded from xp to win 8, re installed autocad 2011.
Now when I try to open a drawing from within autocad my system crashes, I get a flash of horizontal lines then two blank screens.
Tried running narrator but just get static through the speakers, I have to hit the re start button to get back in.
I can open a drawing from explorer if autocad is not allready running, autocad starts and the drawing opens with no problems. but if I try to open another drawing we crash.
View 3 Replies
View Related
May 28, 2012
autocad LT 2008 on windows 7 platform
after using this with only minor crashes for the last year I have now got problems with closing drawings which then locks autocad up and if someone else opens the file in the same program on windows xp then it crashes there program too while closing. I have tried redraw the drawing model file and produce a new drawing sheet exactly the same but it still crashes on saving of the file and have now noticed that any drawing i'm creating now does exactly the same. I have also completely reinstalled autocad LT 2008 to try to fix this problem but with no success. Has there been an update either with windows 7 or autocad that might have caused this problem and how to resolve this problem as I am now left with a computer thats useless to draw upon and rather not install an older version of windows just to resolve this problem after it running fine for over a year now.
View 3 Replies
View Related
Aug 31, 2010
If I have several drawings open at the same time and have done work to some of them, at the end of the day I just pick the AutoCAD application "close" button (the "X" in the top-right corner of the window) and I'm prompted "Save changes to <drawing>?" for each of the drawings.
Unfortunately, most of the times I do this in AC2011, AutoCAD crashes. The next time I open AutoCAD, it initiates the recover but all the changes have been saved in the *.dwg file.
I know this is not the best way to save and close drawings but it has never been a problem.
View 9 Replies
View Related
Sep 29, 2011
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
View 4 Replies
View Related
Dec 27, 2012
I have a Windows 7 machine running AutoCAD 2013. When trying to open any drawings from our AutoDesk Vault 2013 server, AutoCAD will hard lock/freeze and can only be closed by using Windows Task Manager. When accessing the same files through the Vault first, without opening AutoCAD, they open with no issues.
View 1 Replies
View Related
Dec 15, 2013
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies
View Related
Jun 7, 2012
I am using AutoCad LT 2006 and I need to save some drawings as a PDF file. I have tried several times using the instructions on the help menu with no luck.
View 1 Replies
View Related
Aug 9, 2011
I tried the following method to save all drawing currently open. It always fire fill access arror, whereas AutoCAD can save the file wihthout any issue. Here I am checking for drawings that not even saved once and ask the user to take action for those files.
try
{
DocumentCollection docs = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager;
foreach (Document doc in docs)
{
string dname = doc.Name;
string s = doc.Name.Substring(doc.Name.LastIndexOf('\') + 1);
[code]....
View 2 Replies
View Related
May 21, 2012
My work station was recently upgraded to Windows 7, 64 bit, it now frequently crashes Acad, usually when I am saving on exiting a drawing. Bellow is one of many error messages:-
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.0.309.0
Application Timestamp: 4bcbe2a9
Fault Module Name: StackHash_9a0b
Fault Module Version: 6.1.7601.17725
Fault Module Timestamp: 4ec4aa8e
Exception c0000374
Exception Offset: 00000000000c40f2
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057
Additional Information 1: 9a0b
Additional Information 2: 9a0b8e6e32f562d4274362daf3794b40
Additional Information 3: 9dd6
Additional Information 4: 9dd61a7a205b3fd0113f4fc4059f4a26
View 5 Replies
View Related
May 9, 2012
Autocad 2012 was working fine until a week ago when it started taking a long time to open drawings--even search for drawings on our network. It also takes at least 30 seconds to save files, where it used to take 5 seconds at most.
I found the AutoCad 2012 and AutoCad LT 2012 SP1 Ribbon Hotfix, which sounded like my problem, but it is for Product Version F.107.0.0 and I have Product Version F.51.0.0.
View 5 Replies
View Related
May 25, 2012
i am using autocad 2013 student version at home and at college i am using autocad 2012. so when i create drawing in 2013,dosent open on 2012"it says incompatible version". i like to save all my dwg files automatically in 2011 format, i dont want to click save as and change it 2011 format.what i need is whenever i finsh working on drawing, if click save it should automatically save in 2011 format.
View 2 Replies
View Related
Sep 5, 2012
I seem to have my task accomplished, but Inventor crahes on me after it is done.
Here is how my iLogic works.
' Deleting the suppressed parts from the assembly
Dim compDef as AssemblyComponentDefinition
compDef = ThisDoc.ComponentDefinition
Dim compOcc as ComponentDefinition
For Each compOcc in compDef
[Code] ........
Now as soon as the last line is executed, Inventor crashes.
But when I go to the save file part (C:MyPath), both the parts and assembly files are saved and if I open it, they work just fine.
I just can't get inventor to stop crashing.
View 7 Replies
View Related
Jul 16, 2012
Autodesk should provide an easy way to save drawings back to an earlier product release, like an online converter utility for clients etc... I understand that people need to be pushed to get newer products, however by not having an easy way to change a file, it really punishes those who do stay current and get each release. For many years now I find myself drafing in a current release of Civil3d to utilize the latest features that improve work flow, then having to waste a lot of time converting projects back to each clients file requirement.
View 3 Replies
View Related
Jan 9, 2014
I have a block that has to be update in a bunch of drawings -more than 20-. I updated in only one drawing, apply coy paste to the following but the block does not update in the drawing that I am pasting my new block. How is possible to update this block in the following 19 drawings?
View 4 Replies
View Related
Oct 11, 2012
How can i hide the dimensions on the drawing in autocad 2013....screen is cluttered so hiding the dimensions will keep the screen cleaner.
View 2 Replies
View Related
Jul 3, 2013
I just installed Acad v. 2014. I opened up an existing file, went to select a line, but noticed that the line does not highlight when I hover over it like my last version. How do I change the settings so that when I hover over an object, whether it be a line or a cross hatched area, it will highlight that object so I know the length or area of the object?
View 4 Replies
View Related
Nov 6, 2013
I would like to know how to build web configurator from Cad drawings (dwg)?
View 1 Replies
View Related
Jun 26, 2013
When I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies
View Related
Aug 19, 2013
I have a drawing with 72 layouts in it. I also have two drawings with one layout each, that I want to appear in the first drawing. How do I import the layouts from one drawing to the next? I found, "to import layouts as sheets", but it does not seem to be what I need.
View 6 Replies
View Related
Oct 21, 2013
I have recently installed Autocad 2014 and am experiencing very slow and jumpy files when using x-refs. The other machines in the office where I work are not experiencing the same problem and apparently my machine is more powerful.
Originally we thought this might be a network issue (as x-refs are being referenced through the network) but when I put the actual reference files on my computer, I experienced the same issue.
View 2 Replies
View Related
May 28, 2013
We are copying our original files to a sub folder to make revisions that have only happened after bidding. We want to keep our original bid documents intact. I have created a sub folder called 'Confirmed Documents' and added Constructs, Sheets, Elements, etc.
I copied the files over and used the Reference Manager to repath the files. However, all of my schedules and room tags now use the 'NA' prefix because it is not reading the project information. How can i reconnect this folder to the project folder?
View 3 Replies
View Related
Jan 28, 2013
I've started having a problem with the Publish command when publishing multiple drawings to PDF.
When I plot a drawing using the plot command, I don't have a problem.
When I publish one drawing using the Publish command it is also fine.
It is only when I try to publish multiple files that the problem occurs- the PDFs are produced, but the it is as if the drawing contents (paper space) has been shifted up by 10mm or so, cutting off the top of the drawing, and creating a larger margin at the bottom of the drawing. I use exactly the same page setup as for the single drawing plot.
There seems to be no setting that would change this, and the fact that publishing a single drawing works suggests that there is some kind of bug. At the moment i have to plot every drawing individually (or get my colleague to do it- it works fine on his machine, same page setup file!)
See attached example.
View 8 Replies
View Related
Dec 21, 2013
Combining multiple drawings in one go, I have 100 drawings (each has its layout) stored in 100 dwg files. I’m wondering if there is a way to combine them in one dwg file in one go assuming that they don’t overlap.
I need then to edit the title block of all of these layout knowing that this title block is an Xref.
View 5 Replies
View Related
Apr 29, 2013
When I import a drawing using XREF command from one file to the new file the scaling between model space becomes all messed up. making the adjustments between the two?
View 7 Replies
View Related
Jan 9, 2014
I’ve just worked on a series of clients drawing using AutoCad 2009. They are using AutoCad 2013. out of 20 or so drawings several drawings when opening with 2013 open up with Errors requesting recovery is required due to any number of errors ranging from 3 to 7 on average. The error message asks [yes] to recover and it aborts or [no] to continue and the drawing opens ok without further error. If I recover the drawings, and save-as 2013 or other, the same errors appear regardless. However if I open the same drawings using my version of 2009, I didn’t get any errors. The original drawings were compatible with 2009 without conversion.
View 3 Replies
View Related
May 26, 2010
how to make a routine for zoom extents, save all, and close all open drawings in a single routine?
View 3 Replies
View Related
Nov 14, 2012
As many of us seam to do the option to save by default to an older version of AutoCAD or universal DXF format is selected, my problem is however when you save an existing drawing a prompt appears asking if 'Drawing*.dxf last saved in AutoCAD 2004 format. Save in AutoCAD 2013 Drawing format?' this has annoyed me for years!
I have set it as default DXF 2014 for a good reason I don’t want a prompt asking me if I want to then save it as 2013 or I would have set it like that on my default setting, gets on your nerves when you are doing 100's of files.
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
View 5 Replies
View Related
