AutoCAD LT :: 2008 - Windows 7 Crashes While Closing Drawings?
May 28, 2012
autocad LT 2008 on windows 7 platform
after using this with only minor crashes for the last year I have now got problems with closing drawings which then locks autocad up and if someone else opens the file in the same program on windows xp then it crashes there program too while closing. I have tried redraw the drawing model file and produce a new drawing sheet exactly the same but it still crashes on saving of the file and have now noticed that any drawing i'm creating now does exactly the same. I have also completely reinstalled autocad LT 2008 to try to fix this problem but with no success. Has there been an update either with windows 7 or autocad that might have caused this problem and how to resolve this problem as I am now left with a computer thats useless to draw upon and rather not install an older version of windows just to resolve this problem after it running fine for over a year now.
View 3 Replies
ADVERTISEMENT
Apr 12, 2013
We sold a customer a new Dell Precision Laptop - i7 16GB Memory, 512GB Solid State hard drive, Windows 7 64bit. He had upgraded to AutoCad 2013 from 2006. Since installing the laptop when he closes out of a drawing Autocad crashes, windows reports that the program had unexpectedly quit. It doesn't do it all of the time, but it could have something to do with multiple drawings, plotting etc, but it's not an easy one to generate. He does have an older plotter - DesignJet 500 that's installed through a network share off of another computer however I did completely remove the printer / driver and the issue was still occuring.
View 2 Replies
View Related
Jan 18, 2013
We are currently using autocad 2013 LT on windows 7 64bit. The program runs a bit slower than 2012 but the main issue is as follows.
when closing a drawing or multiple drawings (wether they have been recently saved or not) autocad will go into a "not responding" mode and then crash out. This happens at about 70% of the time and is completely random. It may crash a drawing one time but not the next time you are in the same drawing, or when closing multiple drawings may allow you to save some of them when cad closes but then crashes before all of them are saved. We have all of the current updates and fixes. We had the same issue with 2012 but not nearly as often.
View 9 Replies
View Related
Aug 31, 2010
If I have several drawings open at the same time and have done work to some of them, at the end of the day I just pick the AutoCAD application "close" button (the "X" in the top-right corner of the window) and I'm prompted "Save changes to <drawing>?" for each of the drawings.
Unfortunately, most of the times I do this in AC2011, AutoCAD crashes. The next time I open AutoCAD, it initiates the recover but all the changes have been saved in the *.dwg file.
I know this is not the best way to save and close drawings but it has never been a problem.
View 9 Replies
View Related
Mar 13, 2013
I have a single user that is reporting that his AutoCAD LT 2008 crashes after he copy's a JPG straight from a Word docyment into AutoCAD. He is the only user reporting this and it just started a few days ago. Nothing has changed on his PC.
FATAL ERROR: Unhandled Access Violation Writing 0xffed4000 Exception at 696e5068h.
It is Windows 7 64BIT.
View 5 Replies
View Related
Feb 6, 2012
Is there any way to close a drawing that is open on another user's computer, from my computer?
We have a problem with engineers opening a drawing, printing and marking up that drawing, then taking the print to a drafter to make changes to the drawing, but failing to close the electronic drawing file.
Normally, we just call the engineer and ask them to close the drawing. If they were away from their desk, we could just walk over and close the drawing ourselves. Now that's not possible. We have a new security protocol which locks the user's computer after ten minutes of non-use. We each create our own password which we're not supposed to share with others. I just want to be able to log into the server and close a drawing that someone else has open.
View 9 Replies
View Related
Jun 12, 2012
I am losing my dashboard setup when closing drawings/autocad, getting a bit annoying now, having set it back up for the umpteenth time.
View 2 Replies
View Related
May 9, 2013
Subject pretty much sums it up. AutoCAD will crash 8 out of 10 times when I close a sheet set. This problem just recently started and the only thing I've installed was AutoCAD Map 3D.
View 3 Replies
View Related
Mar 21, 2012
My ACAD 2010 LT crashes about 75% of the time whenever I close a drawing. I’m running Windows 7. System info below:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CAD-PC
System Manufacturer Gigabyte Technology Co., Ltd.
System Model GA-790XTA-UD4
System Type x64-based PC
[code]....
All updates that I can find have been downloaded and installed.
View 7 Replies
View Related
Jul 28, 2011
We recently migrated our fileshare project drawings from Window Server 2003 to Window Server 2008-R2 x64...We are experiencing slowness opening or only right click button on more dwg on XP Pro 32/64bit workstation.
Problem repeats if you try to copy many dwg files from windows explorer, right button properties..i have already disabled "validate digital signatures and display special icons" on each machine .There isn't any slowness problem opening files on other application e.g.. Office.
View 9 Replies
View Related
Apr 22, 2011
I frequently have AutoCAD LT crash on me when I close a file. It seems to happen most after I have plotted the drawing.
View 9 Replies
View Related
Jan 12, 2013
After downloading the Autodesk Inventor 2013, I was forced to download the hotfix. I completed the download, and started up Inventor. My force closed crash report directed me to the most updated update, which I then installed to no avail. I've sent an additional crash report, but I've yet to recieve any feedback. When I go to either load the .ipt blank file, or even close the welcome center tab (to be able to access the tools to troubleshoot) It shuts down.
Windows Vista 32-bit
ATI Radeon 3400 HD Series
Intel(R) Core 2 Duo CPU E7300 @ 2.66GHZ X2
View 9 Replies
View Related
Jan 10, 2012
This just started happening after I downloaded DWG TruViewer. I am working on LT 2008 using Fusionware on a MacPro. I needed the viewer to convert newer drawings from an architect. Now, when I double click on a drawing in Explorer a separate AutoCad window opens for each drawing I need open. I prefer to just go up to Window>and click on the one I need at that time, especially if I have several to switch between because it is easier to see the file name I want.
SDI is set to 0
Taskbar is set to 0
Relaunched the program
I can't open files using File>Open because the program crashed each time and Autodesk is not issuing anymore fixes for 2008. (Yes, we should upgrade but there is no money budgeted)
Right-click on any .dwg file and go to Properties>General>Change> and select the AutoCad LT launcher as the preferred program
Since I am in Window 7 instead of XP the File Types tab has been removed from Folder Options so I can't fix it that way.
So, why did this change? FYI that stupid TruViewer made lots of unnecessay changes to my AutoCad and Explorer programs that I am still trying to sort out like changing the file icon and hiding the file extensions. Are they trying to make it hard to find files or what?
And next, how can I reset the default so that double clicking on a .dwg in Explorer opens in already open AutoCad window?
View 5 Replies
View Related
Dec 1, 2008
My company is switching to a Windows HPC 2008 Server based platform and I wanted to know if we'll be able to run Photoshop CS4 Extended on this OS? The Microsoft site seems a bit sparse in terms of information on compatibility with existing applications.
View 3 Replies
View Related
May 19, 2011
If I have more than one drawing open at a time, a not infrequent occurrence, when I close one drawing they all close. Before if I closed the drawing I had open, it would leave the other open for me to work on instead of having to re-open the whole CDR application all over again. I have deleted and re-installed several times and installed SP2
View 3 Replies
View Related
Dec 23, 2008
Moving to a Windows 2008 Server x64 desktop and notice that when Lightroom is installed it's the 32bit version. On Vista x64 the installer automatically installs Lightroom 64bit. Is there a way to manually select the 64 bit version for install ?
View 6 Replies
View Related
Aug 10, 2012
Since this week we have autocad 2013 installed. Everything works correct except for the saving part , 90 % of the time if we save an drawing it crashes .
Error :
The program acad.exe version 25.0.55.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1134
Start Time: 01cd761edf2b2d93
Termination Time: 15
Application Path: C:Program FilesAutodeskAutoCAD 2013acad.exe
Report Id: 2207e411-e213-11e1-8106-001a4b534618
What we did already ?
- Search on google
- clean install only windows & autocad 2013 installed.
Specs :
- Intel Xeon CPU 5160 @ 3,00 Ghz ( 2 processors )
- 8 GB of memory
- SSD ( Vertex 3 )
- Windows 7 Enterprise 64 Bit
- Autocad 2013
We did alot of research on google but can't really find an solutions , autocad 2012 had no problems with saving files.
Also tried different drawing but even if i start an new drawing and will save it , mostly autocad crashing.
View 9 Replies
View Related
Jun 28, 2013
Rscently upgraded from xp to win 8, re installed autocad 2011.
Now when I try to open a drawing from within autocad my system crashes, I get a flash of horizontal lines then two blank screens.
Tried running narrator but just get static through the speakers, I have to hit the re start button to get back in.
I can open a drawing from explorer if autocad is not allready running, autocad starts and the drawing opens with no problems. but if I try to open another drawing we crash.
View 3 Replies
View Related
Sep 29, 2011
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
View 4 Replies
View Related
Nov 26, 2013
I am facing problems with my autocad when i import Revit drawing to it. The file start working extremely slow, and crashes often.
View 1 Replies
View Related
Nov 15, 2011
Currently when I open up multiple drawings (opening them up one at a time) they all appear in the same window (one instance) of AutoCAD.
I want each drawing to open in separate instances so I can view them on separate monitors (and close one without being asked to close them all).
I have tried changing the SDI system variable from 0 and 1 (and vise-versa)
I have tried changing the windows default program from AutoCAD Application to AutoCAD Launcher (and vise-versa)
I have set the TASKBAR system variable at both 0 and 1 (and vise-versa)
Windows 7
AutoCAD LT 2012
View 9 Replies
View Related
Jun 27, 2010
what switch is it that needs to be changed so that when one opens up multiple drawings, they aren't sitting in the taskbar? Normally, you go to your 'Window' in the menubar to see your populated list.
View 4 Replies
View Related
Sep 25, 2013
Autocad crashes frequenlty. Especially when making a pdf.
View 7 Replies
View Related
Jul 6, 2011
why Autocad 2012 opens one window per drawing as opposed to Autocad 2007/2008 opening one window for as many drawings as you have open. (I also don't care to group/ungroup similar programs through Windows 7.) This must be an Autocad 2012 program default that I can't figure out to change.
View 9 Replies
View Related
Mar 25, 2013
Running AutoCAD 2013 on Windows 7 64-bit OS Dell desktop.Whenever I plot 1 in 4 of the times, AutoCAD freezes, usually crashing. Happens both when either typing the command or using pulldown option.Freezes before I get a chance to choose which printer/plotter but plotting with HP Designjet T1120.
I am assuming downloading the HP Universal driver wouldn't do me any good. I am not crashing after I send anything to plot, but before, immediately after the 'Plot' window comes up, it freezes.
View 4 Replies
View Related
Aug 7, 2013
I have a single user of AutoCAD LT 2013 SP2 on a Windows 8 machine. It worked flawlessly for a few months and then suddenly started crashing a lot, especially when accessing the FILE menu.
We get a lot of these:The program acadlt.exe version 25.0.55.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: b88
Start Time: 01ce91ca4c44379a
Termination Time: 60000
Application Path: C:Program FilesAutodeskAutoCAD LT 2013acadlt.exe
Report Id: 02e9f9ca-fe01-11e2-be80-a41f72527795
Faulting package full name:
Faulting package-relative application ID:
I put him in Windows 7 compatability mode and the rest of the day yesterday was good. Today, he sent me this error:
AutoCAD LT Error Aborting
FATAL ERROR: Unhandled Access Violation Reading 0x8ca0 Exception at 250f29f7h
The only changes since these started was a new wireless mouse (Microsoft) and loading Adobe Acrobat Standard (latest version) on the machine. We did both of those a few weeks ago and the problems have started after that.
View 1 Replies
View Related
Jan 7, 2013
I have ACA 2013 (student version) running in the Windows 8 environment. I cannot open anything drawn in a previous release nor can I open a drawing created in ACA 2013 that was installed on the Windows 7 platform.
I have tried to drag in the drawings through design center. That worked for a while now when I try that it causes ACA to crash. Also I have tried multiple drawings that were created in several different versions of ACA. (2004, 2006 and 2009)
As a side note I was able to open those files in ACA 2013 running on the Windows 7 OS.
View 2 Replies
View Related
Jul 25, 2012
When I open a .dwg file from a saved location auto cad crashes about 35% of the way through loading. I did not have this problem when I was running Windowws XP but now I am running Windows 7.
View 6 Replies
View Related
Jun 3, 2011
I bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies
View Related
Apr 19, 2013
I just got a brand new Dell XPS8500 with Windows 8 2 days ago and installed CS6, and I'm having problems with Photoshop crashing, Indesign has also crashed a few times.
Photoshop seems to be working for a few minutes and then crashes, and just says that it has encountered a problem and needs to close, no further explanation. It looks like my Windows is up to date, but when I try to download Adobe updates it says "The update server is not responding. The server might be offline temporarily or the internet or firewall settings may be incorrect". I didn't think there would be updates, I only installed 2 days ago.
View 9 Replies
View Related
Mar 18, 2014
I recently upgraded my laptop to one with Windows 8 (not because of Windows). The File Manager program does not work on my laptop, so I've had to install a third party file management app. Does Lightroom integrate with the Windows app because whenever I try to manage files in Lightroom (plug-in manager, publishing services, import destination) the program crashes. I can't install any plug-in's or add any new folders to my export settings.
View 1 Replies
View Related
