I have a single user that is reporting that his AutoCAD LT 2008 crashes after he copy's a JPG straight from a Word docyment into AutoCAD. He is the only user reporting this and it just started a few days ago. Nothing has changed on his PC.
FATAL ERROR: Unhandled Access Violation Writing 0xffed4000 Exception at 696e5068h.
It is Windows 7 64BIT.
why does it take ages to copy and paste from one drawing to another
View 3 Replies View Relatedautocad LT 2008 on windows 7 platform
after using this with only minor crashes for the last year I have now got problems with closing drawings which then locks autocad up and if someone else opens the file in the same program on windows xp then it crashes there program too while closing. I have tried redraw the drawing model file and produce a new drawing sheet exactly the same but it still crashes on saving of the file and have now noticed that any drawing i'm creating now does exactly the same. I have also completely reinstalled autocad LT 2008 to try to fix this problem but with no success. Has there been an update either with windows 7 or autocad that might have caused this problem and how to resolve this problem as I am now left with a computer thats useless to draw upon and rather not install an older version of windows just to resolve this problem after it running fine for over a year now.
How can I transfer .dwg files from my old computer (Vista OS) to a new computer (Windows 7) and not have them transfer as "read only"? I have copied the existing files from the old computer to a flash drive and then transfered them using the flash drive to the new computer. They open but as read only. I have tried transfering each folder individually and the files still open as "read only". I have checked the properties on the files and they are identical to those on the original computer and the flash drive. Yet when they transfer to the new computer they come in as read only. I have turned off the "read only" and asked it to override the read only file but as soon as I close and open the .dwg it is still read only. how to make these files active on my new computer?
View 1 Replies View RelatedI have a user who will be moving to a new Windows 7 computer, for which I have installed AutoCad Civil 3D 2012. They would like it so that all of their settings and preferences are copied over from their current version of AutoCad Civili 3D 2008. Currently the user has windows XP professional.
how to do this as I am unfamiliar with AutoCad.
I have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?
View 5 Replies View RelatedWhen using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
One of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.
View 4 Replies View RelatedI'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.
View 5 Replies View Relatedis it possible to copy and paste parts in an assembly but also keeping any constraints set on the part?
I.e. if I had a square block constrained to a flat face of a floor, when I copy and paste the block many times I would like all the copy blocks to still be constrained to the floor.
LT 2011- I place a JPEG of a logo on my sheet in model space. Is there any way to manipulate it as in moving it, making it a tad smaller, etc.? Am I able to copy and paste it
View 1 Replies View RelatedUsing copy and paste to add symbols to a layer, after a point the symbols will no longer paste.
View 3 Replies View RelatedI have recently upgraded to AutoCAD LT 2012. The copy/paste function and the group/ungroup function are not working. I have run service pack 2 with no improvement.
View 9 Replies View RelatedI have one big problem copy and paste symbols in one idw to another idw it takes to much time.it's possible through macro or ilogic for copying symbols in drawings?
View 4 Replies View Relatedusing map 3d 2012 with windows 7 and when copy and try to paste it takes roughly 3.5 minutes.
View 1 Replies View RelatedMe and some fellows at work have been noticing a significant increase in the time it takes to copy with base point and paste into a different drawing file. Maybe it is just the 2012 version of the software , what has changed or how to minimize the time this takes. I don't see any reason it should take up to a minute to copy a few polylines from one drawing to the next.
View 5 Replies View RelatedI cannot seem to paste into this one drawing that a client has issued to me. I can paste into all associated x-refs just fine, but the main drawing is the issue. Before we get into things I have tried all the most common things already.
- I have checked layeer Visibilties and unreconciled layers.
- I have run audit and have purged/scalelistedit all drawings
- I have done almost everything ><
To sum it up I think it is global variable of some sort.
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
I have 2006 AutoCAD LT and have been trying to copy and paste something from one drawing to another and
ARX ERROR: eDuplicateKey
keeps popping up!
Okay I've been building random things to teach myself how to use Inventor and right now I'm stuck on a rim I'm creating. My question is.. is there a way to copy and paste a lofted item since there are three parts to it (2 planes and 1 guide) because I need 4 more spokes and if I copy the loft it copies all three parts seperately. Then when I paste and orientate the small end of the loft to the plane I want it tells me "Unsatisfied Geometric Inputs".
View 4 Replies View RelatedEver since updating to the latest service pack I can no longer copy and paste leaders inside a drawing.
I used to be able to set up the leader I wanted and then copy and paste to all the parts I wanted to assign it to but I can't paste anymore.
I am using the iproperties data within the text box..
Inventor 2013
I still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:
- I have a drawing file, in metres, that I want to copy to another file.
- My second drawing, in inches, is where I want to paste the drawing from the first file.
Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.
I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.
I'm trying to develop one tool with that objective:
View 9 Replies View RelatedI am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.
I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.
Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.
Using Autocad_2k10 and ScriptPro
Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)
I'm stuck on the "paste to file", is this possible?
I'm using ScriptPro cause of the batch process.
Within drawing and between drawing copy with basepoint and paste is not working anymore.
View 9 Replies View RelatedI have a project for school that I am trying to complete at home, but realized that I don't have the proper SUD file at home. Is there any way I could copy and paste the already dimensioned object into the new SUD later?
View 1 Replies View RelatedI'm using AutoCad LT 2013 at work. My issue is I have always been able to highlight and object and then enter my command and perform that command. Something happened and now when I highlight then enter my command and press enter it un-highlights the object and prompts me to highlight the object again. Also if I want to copy and paste a highlighted object it wont allow me unless I type in the command first. I can't figure out what I did.
View 4 Replies View RelatedI have AutoCAD 2013. I am trying to paste a block from another drawing to the one I am working on but when I paste the block, the color is different than what it should be. The drawing that I am trying to paste it on was already created for me.
View 3 Replies View RelatedI have a drawing in house that has issues. When using edit/ copy and edit / paste on a block within the drawing, the block changes to another block when pasted. On a side note, it comes in at the rotation of the original object which was copied. I believe that I am using V.2000
View 8 Replies View Related