When using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
I somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies View RelatedI am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.
I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.
Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.
You can copy both the surface and the original (in this case contour polylines) data or only the surface. In both cases paste operation results into a copy of both data and surface.
Ok, But when paste and rebuild, the distance from original base point and destination point is applied in turn to the surface itself. Maybe it is a BUG ?
Civil 3D (2013)
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
I have had this problem many times with both CS6 and CS5. I'm not sure if this is a Photoshop question or a Windows OS 8 question but anyways it seems to only happen with Photoshop.
I copy an image offline to edit in photoshop. After I'm finished I save it and delete the image layer from the workspace to get ready for the next image. I grab another image that I want to paste in the same photshop workspace. When I paste, it pastes the same image I copied first. It even does this when I restart Photoshop, so that's why I think it may have to do with Windows Clipboard.
I'm also really interested in details about how 'Copy/Paste" and the "Clipboard" work with different programs so I can best understand how to utilize it with what seems to be a simple tool, yet I still find myslef with questions because I don't filly undertsnad it.
I just got Gimp 2.8 for Mac. I can open a picture, do a blur and export. The copy paste is giving me problems. It worked once. I make a selection with the rectangle and do a control c. I also tried the menu. The selection doesn't go to the clipboard. After 6 tries, the same original copy was the only one in there.
View 1 Replies View Relatedi have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
Recently I started using AutoCAD 2012 and I ran into one problem which I didn't encounter before.
The problem is that when I try to paste objects from another drawing (through clipboard - usually another instance of AutoCAD) I can't paste them in some drawings only.
The following things happen:
-Autocad behaves normally like when I usually paste objects except there is nothing inserted.
-When I save the drawing after unsuccessful insert, even if I canceled inserting, drawing size increases dramatically (for about 2-4MB).
-If I open new drawing, I can insert objects there.
-Also when I copy to clipboard, autocad takes a lot of time even if it is only few lines.
I tried these thing to fix issue:
-I checked if there are any layers turned off.
-I tried to copy with COPYBASE
-I restarted autocad (sometimes it works but only for some moments or for one insert).
-I did PURGE and AUDIT
-I tried to copy paste in same instance of AutoCAD but that didn't work.
I'm usually using t least 2 instances of AutoCAD (I hope that is not the problem).
I copied a file from my Card Program and then pasted it into X4. Besides the quality being shocking the end section of the image was pasted at the beginning, which I saw mentioned in another post.
But the same clipboard image pasted perfectly in PSPX and PSPX3, so the problem is not with the image nor with the Card Program.
Below is the image shown pasted in X, X3 and X4.
Has this been addressed and/or reported or is there a fix. This is extremely poor standards and obviously is from incorrect programming in X4. Not impressed.
Plainly clear one cannot have only X4 installed to work with as it still has many bugs that have not been rectified.
I am trying to copy some object from drawing but it's saying Copy to Clipboard failed!
View 3 Replies View RelatedI am working on a project which up until recently used Excel VBA and AutoCAD. To the point, one of the important things this process did was grab a range of cells in the Excel file and copy them to the clipboard. This range of cells was a nicely formatted table with borders, cell filled colors, etc... and the VBA code would copy it to the clipboard before laumching AutoCAD. Once AutoCAD was opened a LISP program would automatically paste this into the model space. It made a lovely OLE object in AutoCAD with crisp, clear appearance.
We are now trying to do away with the VBA part in favor of .NET. I am really at a loss to explain why the code I used before will not work, nor will anything else I try:
VBA CODE
Sheets("Sheet2").SelectRange("B1:K93").Copy
VB.NET CODE
vExcelRange1 - vExcelSheet2.Range("B1:K93")vExcelRange1.Copy()
The .NET code is not working at al.
I'm a relative noob to GIMP. Long time Paint Shop Pro user who has gone over to a Mac Book. I'm very frustrated by my inability to paste more than one layer at a time. Meaning, that I paste a layer from the clipboard into an image I am building, but I cant copy a new image to paste in without shutting down the program & reopening....Otherwise the same image keeps trying to repaste.
View 7 Replies View RelatedI am trying to copy some items in cad but I keep getting the error ' copy to clipboard failed'.
View 9 Replies View RelatedWhenever I select some objects in an AUTOCAD drawing and Press Ctrl+C to copy them for taking it to any other file, it gives error "COPY TO CLIPBOARD FAILED."
However, this error is not for all the files but in some of the files. After much tweaking and researching on my own, I found out that this happens in files in which I have set viewports in LAYOUT. When i delete the entire LAYOUT by right Click + Delete, and then go to MODEL and do Ctrl+C, the copy to clipboard happens in normal way.
Why do I get the error when I have set viewports in LAYOUT ?
I am having a strange issue with a specific file. If I copy to clipboard any element in this file it locks up. If I wblock the drawing, it locks up. If I open a blank file and select an element and drag and drop it in to the new blank file, it works fine.
If I copy to clipboard the droped element in the new file it works fine. It is local to this one file. This one file is most probably a 2008 file originaly, opened and saved to 2012.
What gremlins should I look for from older verstion to newer version that would cause this issue?
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies View RelatedI am using AutoCAD Architecture 2011 and am trying to export a file to a previous version (after i bind xrefs) so I can play with it in Sketchup. When I go through and have it export and chose the file name and location, nothing happens. I don't even get an error message and no file was created. To work around this, I was hoping to copy/paste the drawing into a new file to export from there but when I copy I get an error message that says "Copy to clipboard failed".
I audited, purged, audited, purged, restarted my computer and CAD. All this works fine on other files in the project so I'm guessing the problem lies within this particular file.
This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
View 2 Replies View RelatedI can't find the option to copy an image from LR's library to the clipboard - I'm sure I'm just overlooking it -
View 9 Replies View RelatedRunning on XP pro SP3, all updates.
I purchased and installed PSP X4 ultimate (14.0.0.332), having first removed all traces of previous versions.
Install went fine and everything I've tried so far works as expected but I found one minor, if irritating bug:
I had retained in My PSP files a number of picture tubes, some of which, it turned out, were duplicates of those provided in PSP X4 and the Ultimate contents pack. So when I first checked the picture tubes, the usual window popped up listing the duplicates it had found, with the button to copy the list to the clipboard. However clicking on that button, the only thing that was copied to the clipboard was the first letter of the first entry in the list, not the whole list, as worked properly in X3 and earlier.
I then manually searched for and deleted the duplicates (which a copy of the list would have made much less time consuming, of course). To test that this was a reproducible bug, I then deliberately crated a new set of duplicates (simply by copying one of the subfolders in C:Program FilesCorelCorel PaintShop Pro X4Corel_10 to a subfolder in My PSP files picture tubes folder). Again the list of new duplicates showed up, but clicking copy to clipboard again only the first letter in the first item on the list was copied.
Is there a way to select everything on the artboard and copy it to the clipboard using VBA?
View 3 Replies View RelatedIs there a plugin in existance, that I can make a selection in Photoshop and then copy the coordinates of that selection to the clipboard?
I am a texture artist and frequently lay a number of graphics out in one file, before typing out the coordinates for each element. Currently this is slow manual task, but could be made so much faster if I didn't have to type everything out.
how the Photoshop DOM works with this snippet but I can't get it to select a pathItem correctly. When testing in ESTK I sometime have to run a line to that sets the path Item selected property to true several times before the path is selected in the GUI.Here is the script I am working on.
copyPathsToPhotoshop()
function copyPathsToPhotoshop(){
var currentLayer = app.activeDocument.activeLayer;
var count = currentLayer.pathItems.length;
var shapeNumber = 105
for( var p=1;p<count;p++){
[code]....
I have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?
View 5 Replies View RelatedOne of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.
View 4 Replies View RelatedI'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.
View 5 Replies View Relatedis it possible to copy and paste parts in an assembly but also keeping any constraints set on the part?
I.e. if I had a square block constrained to a flat face of a floor, when I copy and paste the block many times I would like all the copy blocks to still be constrained to the floor.
LT 2011- I place a JPEG of a logo on my sheet in model space. Is there any way to manipulate it as in moving it, making it a tad smaller, etc.? Am I able to copy and paste it
View 1 Replies View RelatedUsing copy and paste to add symbols to a layer, after a point the symbols will no longer paste.
View 3 Replies View Related