AutoCAD 2013 :: Can't Find Clipboard Panel / Unable To Copy And Paste
Aug 6, 2012
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
In some of my DWG files I can’t able to copy paste the elements from one file to another . For example, I can’t able to copy the level marks from one file to another. Both files are located in same coordinate.
When using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
I am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.
I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.
Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.
I recently upgraded from Autocad 2012 Mechanical. Previously, I was able to simply select objects in AC, ctrl-c them, then paste them into Word. I am now using 2013 Product Design Suite, with the Vault addin for word. I am now unable to do this. What I notice is that when I switch to my Word window and paste, there's some unknown process occurring in Autocad. Furthermore, what should be an image box with my drawing in Word is a blank box.
AutoCAD: 2013 Product Design Suite, using 2013 Mechanical.
You can copy both the surface and the original (in this case contour polylines) data or only the surface. In both cases paste operation results into a copy of both data and surface.
Ok, But when paste and rebuild, the distance from original base point and destination point is applied in turn to the surface itself. Maybe it is a BUG ?
I have had this problem many times with both CS6 and CS5. I'm not sure if this is a Photoshop question or a Windows OS 8 question but anyways it seems to only happen with Photoshop.
I copy an image offline to edit in photoshop. After I'm finished I save it and delete the image layer from the workspace to get ready for the next image. I grab another image that I want to paste in the same photshop workspace. When I paste, it pastes the same image I copied first. It even does this when I restart Photoshop, so that's why I think it may have to do with Windows Clipboard.
I'm also really interested in details about how 'Copy/Paste" and the "Clipboard" work with different programs so I can best understand how to utilize it with what seems to be a simple tool, yet I still find myslef with questions because I don't filly undertsnad it.
I just got Gimp 2.8 for Mac. I can open a picture, do a blur and export. The copy paste is giving me problems. It worked once. I make a selection with the rectangle and do a control c. I also tried the menu. The selection doesn't go to the clipboard. After 6 tries, the same original copy was the only one in there.
Whenever I select some objects in an AUTOCAD drawing and Press Ctrl+C to copy them for taking it to any other file, it gives error "COPY TO CLIPBOARD FAILED."
However, this error is not for all the files but in some of the files. After much tweaking and researching on my own, I found out that this happens in files in which I have set viewports in LAYOUT. When i delete the entire LAYOUT by right Click + Delete, and then go to MODEL and do Ctrl+C, the copy to clipboard happens in normal way.
Why do I get the error when I have set viewports in LAYOUT ?
I cannot seem to paste into this one drawing that a client has issued to me. I can paste into all associated x-refs just fine, but the main drawing is the issue. Before we get into things I have tried all the most common things already.
- I have checked layeer Visibilties and unreconciled layers.
- I have run audit and have purged/scalelistedit all drawings
- I have done almost everything ><
To sum it up I think it is global variable of some sort.
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
I still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:
- I have a drawing file, in metres, that I want to copy to another file.
- My second drawing, in inches, is where I want to paste the drawing from the first file.
Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.
I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.
I recently updated Gimp on my Mac Version 10.7.5. I can't copy and paste images from the Internet. Instead, I have to save that image, open it on Gimp, select all of it, and then I can paste it onto my work document. It's a huge hassle, and I'm sure there's a way I can copy and paste images from the Internet. When I try, it just says there is no image data on the clipboard for me to paste.
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried -purge r, purge a, audit, save -wblock explode, purge a, audit, save to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
If I copy a single line from a file then paste it into a new file with nothing in it and save, I end up with a 3 or 4 meg file. I noticed when I paste the line into the new drawing, I get the following message over and over:
Substituting [simplex.shx] for [OA_Edina.shx]. Substituting [simplex.shx] for [OA_2007.shx].
We have files that are 20 or 30 meg that should only be 1 or 2 meg. Purge and audit in the .dwg does not work. One way to fix it is to dxfout then purge and audit the .dxf file, then save back to .dwg. The audit typically finds tens of thousands of errors. This process takes a long time and the problem comes back as soon as someone copies something into the file. We need a more permanent fix.
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
A few of the computers are having problems with the Copy/Paste function. They had it working a few times and after that, it stopped working (can't paste after copying). Have tried restarting autocad and the computer but the issue is still there. Have also tried updating the service pack to the latest version. It works for a while and stopped working again.
When I try to Copy & Paste an object from one file to another, appears following alert window: “This application has detected a mixed version of AEC objects participating in this operation. Newer AEC objects will be disallowed from participating in this operation”. And I cannot paste the object copied from other file. This happened to me when I work with Autocad2010 using drawings saved as Autocad2004 in Autocad2013.
Since I am working in a group of people that have different versions of Autocad, I need the solution for this problem.
I recently updated to Autocad Architectural 2013 and can't find the design panel for walls, door & windows. This panel created 3D objects and had grips to modify the object. Where do I find it?
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing} 3. {type CTRL+V} // paste a number as a distance into command line 4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
i'm trying to do is copy some linework in a sketch i have on autocad 2011 (i havent upgraded it yet) and paste it into a sketch i have on inventor 2013.
Copy and paste works fine with other versions of inventor or autocad, but i can't use 2013 inventor for pasting.
When i attempt to paste the linework into my 2013 inventor sketch i recieve a long hefty error message:
"String resource could not be loaded (and is missing?) for id 5239 (error 2fee34a0)"
I have recently upgraded from LT2011 TO Architecture 2013. I always use perpendicular tracking when copy and pasting but when I want to copy (or paste) a certain distance perpendicular to that object it doesn't like it. It's tricky to explain but say I wanted to copy a block of a teble 1200mm from the original block I'd copy, hover over the basepoint and move my cursor in the intended direction and type in 1200 and enter. The previous version of AutoCAD worked this command fine but since the upgrade I'm having trouble. Surely it's something as simple as changing the drafting settings bit I've gone through them all and no luck.
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
