AutoCAD 2013 :: Cannot Copy / Paste Object From One File To Another
Oct 16, 2012
When I try to Copy & Paste an object from one file to another, appears following alert window: “This application has detected a mixed version of AEC objects participating in this operation. Newer AEC objects will be disallowed from participating in this operation”. And I cannot paste the object copied from other file. This happened to me when I work with Autocad2010 using drawings saved as Autocad2004 in Autocad2013.
Since I am working in a group of people that have different versions of Autocad, I need the solution for this problem.
View 5 Replies
ADVERTISEMENT
Jun 13, 2013
If I copy a single line from a file then paste it into a new file with nothing in it and save, I end up with a 3 or 4 meg file. I noticed when I paste the line into the new drawing, I get the following message over and over:
Substituting [simplex.shx] for [OA_Edina.shx].
Substituting [simplex.shx] for [OA_2007.shx].
We have files that are 20 or 30 meg that should only be 1 or 2 meg. Purge and audit in the .dwg does not work. One way to fix it is to dxfout then purge and audit the .dxf file, then save back to .dwg. The audit typically finds tens of thousands of errors. This process takes a long time and the problem comes back as soon as someone copies something into the file. We need a more permanent fix.
View 8 Replies
View Related
May 25, 2013
I have a project for school that I am trying to complete at home, but realized that I don't have the proper SUD file at home. Is there any way I could copy and paste the already dimensioned object into the new SUD later?
View 1 Replies
View Related
May 1, 2013
I'm using AutoCad LT 2013 at work. My issue is I have always been able to highlight and object and then enter my command and perform that command. Something happened and now when I highlight then enter my command and press enter it un-highlights the object and prompts me to highlight the object again. Also if I want to copy and paste a highlighted object it wont allow me unless I type in the command first. I can't figure out what I did.
View 4 Replies
View Related
Aug 31, 2012
I am attempting to copy and paste a part of a drawing from AutoCAD 2011 into ms, Excel or Word. I am able to copy within a vport so my whole screen is not copied. My problem is only 2D objects show up when I paste. I tried different visual styles and colors but still cant get my solid objects to appear.
View 7 Replies
View Related
Jul 15, 2013
I cannot seem to paste into this one drawing that a client has issued to me. I can paste into all associated x-refs just fine, but the main drawing is the issue. Before we get into things I have tried all the most common things already.
- I have checked layeer Visibilties and unreconciled layers.
- I have run audit and have purged/scalelistedit all drawings
- I have done almost everything ><
To sum it up I think it is global variable of some sort.
View 9 Replies
View Related
Oct 19, 2012
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
View 9 Replies
View Related
Oct 31, 2013
I still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:
- I have a drawing file, in metres, that I want to copy to another file.
- My second drawing, in inches, is where I want to paste the drawing from the first file.
Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.
I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.
View 6 Replies
View Related
Jan 13, 2013
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried
-purge r, purge a, audit, save
-wblock explode, purge a, audit, save
to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
View 9 Replies
View Related
May 18, 2013
In some of my DWG files I can’t able to copy paste the elements from one file to another . For example, I can’t able to copy the level marks from one file to another. Both files are located in same coordinate.
View 6 Replies
View Related
Oct 11, 2013
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
View 4 Replies
View Related
Jun 16, 2013
we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
View 9 Replies
View Related
Jan 6, 2014
A few of the computers are having problems with the Copy/Paste function. They had it working a few times and after that, it stopped working (can't paste after copying). Have tried restarting autocad and the computer but the issue is still there. Have also tried updating the service pack to the latest version. It works for a while and stopped working again.
View 5 Replies
View Related
May 13, 2012
I can't copy/paste in my drawing.
I open new drawing, then press Ctrl+Shift+C to copy an object with a base point and then when i press Ctrl+V nothing shows.
It says Command: _pasteclip, but there is no object attached to the cursor to paste.
View 9 Replies
View Related
Dec 4, 2013
when i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
View 3 Replies
View Related
Jul 9, 2013
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
View 8 Replies
View Related
Jan 29, 2013
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
View 1 Replies
View Related
May 1, 2012
i'm trying to do is copy some linework in a sketch i have on autocad 2011 (i havent upgraded it yet) and paste it into a sketch i have on inventor 2013.
Copy and paste works fine with other versions of inventor or autocad, but i can't use 2013 inventor for pasting.
When i attempt to paste the linework into my 2013 inventor sketch i recieve a long hefty error message:
"String resource could not be loaded (and is missing?) for id 5239 (error 2fee34a0)"
View 5 Replies
View Related
Feb 27, 2013
I have recently upgraded from LT2011 TO Architecture 2013. I always use perpendicular tracking when copy and pasting but when I want to copy (or paste) a certain distance perpendicular to that object it doesn't like it. It's tricky to explain but say I wanted to copy a block of a teble 1200mm from the original block I'd copy, hover over the basepoint and move my cursor in the intended direction and type in 1200 and enter. The previous version of AutoCAD worked this command fine but since the upgrade I'm having trouble. Surely it's something as simple as changing the drafting settings bit I've gone through them all and no luck.
View 3 Replies
View Related
Aug 5, 2013
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies
View Related
May 2, 2013
When copying a symbol (control c) then pasting (control v) I can move the symbol to another location and left click to drop it. Many times when I do this the symbol disappears and you can't see it. If I re (regen) the the entire model disappears. I can close out the drawing then open it back up the drawing has been restored and the symbol will be at the location that I had placed it at. With the same drawing, I don't have these problems with 2012.
View 1 Replies
View Related
Sep 7, 2012
I recently upgraded from Autocad 2012 Mechanical. Previously, I was able to simply select objects in AC, ctrl-c them, then paste them into Word. I am now using 2013 Product Design Suite, with the Vault addin for word. I am now unable to do this. What I notice is that when I switch to my Word window and paste, there's some unknown process occurring in Autocad. Furthermore, what should be an image box with my drawing in Word is a blank box.
AutoCAD: 2013 Product Design Suite, using 2013 Mechanical.
Word: 2007, Service Pack 2.
View 6 Replies
View Related
Aug 6, 2012
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
View 6 Replies
View Related
Jan 31, 2013
...still happening in 2013...any answers out there? I'm getting pretty tired of redefining blocks (sending the wipeout to the back of the draw order) after pasting them into drawings.
View 4 Replies
View Related
Dec 11, 2012
I'm using AI CS6;
I have a type object with an opacity mask created in one document. When I copy and paste this object into a new file the text is pasted without the opacity mask attributes. I can separately copy and paste the opacity mask object but then I face a tricky realignment to repeat.
View 5 Replies
View Related
Nov 10, 2011
I am in the course of evaluating Xara, and it has a lot of good things going for it compared to Adobe, particularly in combining many of the features of ID and AI. The graduated color screening on objects is way better than AI.
However, I cannot find how to copy an object or text block and paste multiples at specific intervals. Both Pagemaker and InDesign have this feature, so I can't believe Xara overlooked it, as it is particularly useful when laying out say business cards 12 up on a sheet for printing. Yes, I have done a search on this forum and also studied Xara help files.
View 9 Replies
View Related
Nov 15, 2013
I have lost the ability on cs4 to copy from one file and paste to a new template.
View 1 Replies
View Related
Apr 22, 2014
how to copy and paste a bin from one project file into another. I don't want to import using the Media Browser because it imports a bunch of reference files that are already in the project file I'm pasting into.
View 4 Replies
View Related
Aug 10, 2012
I am saving graphics from Word for usage in a Framemaker document. When I copy and paste the file into Photoshop it becomes blurred and unusable. How do I resolve this? I have tried saving the file in it's highest resolution but that doesn't work either.
View 1 Replies
View Related
Nov 14, 2013
If I am copying an object using snaps vertically down a wall a certain distance and come to a wall corner and then need to copy the object the same distance horizontally as I did vertically is there an easy way to enter this new direction? I keep thinking that I would just enter displacement and for X I should be able to use my mouse and snap/measure the old Y distance and then put Y,Z as 0. However, there is no option to get a relative distance in displacement. Is there something I am missing in the command?
View 8 Replies
View Related
Aug 7, 2013
I am using ACAD 2005 and am trying to copy&paste several objects from a layer I created in one .dxf file to one of the 2 standard layers (0 or Defpoints) in a new blank .dxf file.
My problem though is that if I copy and paste all of the objects (or even one of them) and them move to the new file and paste, it pastes the objects, but also "imports" into the new file the original file's layer that these objects were on.
For clarity, the new file only has the 2 standard layers and then after copy/pasting an object, the file manager shows the 3rd layer from the original file.
View 9 Replies
View Related
