AutoCAD Inventor :: Copy And Paste From 2011 To 2013 Is Failing?
May 1, 2012
i'm trying to do is copy some linework in a sketch i have on autocad 2011 (i havent upgraded it yet) and paste it into a sketch i have on inventor 2013.
Copy and paste works fine with other versions of inventor or autocad, but i can't use 2013 inventor for pasting.
When i attempt to paste the linework into my 2013 inventor sketch i recieve a long hefty error message:
"String resource could not be loaded (and is missing?) for id 5239 (error 2fee34a0)"
View 5 Replies
ADVERTISEMENT
Jul 15, 2013
I cannot seem to paste into this one drawing that a client has issued to me. I can paste into all associated x-refs just fine, but the main drawing is the issue. Before we get into things I have tried all the most common things already.
- I have checked layeer Visibilties and unreconciled layers.
- I have run audit and have purged/scalelistedit all drawings
- I have done almost everything ><
To sum it up I think it is global variable of some sort.
View 9 Replies
View Related
Oct 19, 2012
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
View 9 Replies
View Related
Oct 31, 2013
I still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:
- I have a drawing file, in metres, that I want to copy to another file.
- My second drawing, in inches, is where I want to paste the drawing from the first file.
Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.
I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.
View 6 Replies
View Related
Jan 13, 2013
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried
-purge r, purge a, audit, save
-wblock explode, purge a, audit, save
to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
View 9 Replies
View Related
May 18, 2013
In some of my DWG files I can’t able to copy paste the elements from one file to another . For example, I can’t able to copy the level marks from one file to another. Both files are located in same coordinate.
View 6 Replies
View Related
Jun 13, 2013
If I copy a single line from a file then paste it into a new file with nothing in it and save, I end up with a 3 or 4 meg file. I noticed when I paste the line into the new drawing, I get the following message over and over:
Substituting [simplex.shx] for [OA_Edina.shx].
Substituting [simplex.shx] for [OA_2007.shx].
We have files that are 20 or 30 meg that should only be 1 or 2 meg. Purge and audit in the .dwg does not work. One way to fix it is to dxfout then purge and audit the .dxf file, then save back to .dwg. The audit typically finds tens of thousands of errors. This process takes a long time and the problem comes back as soon as someone copies something into the file. We need a more permanent fix.
View 8 Replies
View Related
Oct 11, 2013
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
View 4 Replies
View Related
Jun 16, 2013
we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
View 9 Replies
View Related
Jan 6, 2014
A few of the computers are having problems with the Copy/Paste function. They had it working a few times and after that, it stopped working (can't paste after copying). Have tried restarting autocad and the computer but the issue is still there. Have also tried updating the service pack to the latest version. It works for a while and stopped working again.
View 5 Replies
View Related
May 13, 2012
I can't copy/paste in my drawing.
I open new drawing, then press Ctrl+Shift+C to copy an object with a base point and then when i press Ctrl+V nothing shows.
It says Command: _pasteclip, but there is no object attached to the cursor to paste.
View 9 Replies
View Related
Oct 16, 2012
When I try to Copy & Paste an object from one file to another, appears following alert window: “This application has detected a mixed version of AEC objects participating in this operation. Newer AEC objects will be disallowed from participating in this operation”. And I cannot paste the object copied from other file. This happened to me when I work with Autocad2010 using drawings saved as Autocad2004 in Autocad2013.
Since I am working in a group of people that have different versions of Autocad, I need the solution for this problem.
View 5 Replies
View Related
Dec 4, 2013
when i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
View 3 Replies
View Related
Jul 9, 2013
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
View 8 Replies
View Related
Jan 29, 2013
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
View 1 Replies
View Related
Feb 27, 2013
I have recently upgraded from LT2011 TO Architecture 2013. I always use perpendicular tracking when copy and pasting but when I want to copy (or paste) a certain distance perpendicular to that object it doesn't like it. It's tricky to explain but say I wanted to copy a block of a teble 1200mm from the original block I'd copy, hover over the basepoint and move my cursor in the intended direction and type in 1200 and enter. The previous version of AutoCAD worked this command fine but since the upgrade I'm having trouble. Surely it's something as simple as changing the drafting settings bit I've gone through them all and no luck.
View 3 Replies
View Related
Aug 5, 2013
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies
View Related
May 2, 2013
When copying a symbol (control c) then pasting (control v) I can move the symbol to another location and left click to drop it. Many times when I do this the symbol disappears and you can't see it. If I re (regen) the the entire model disappears. I can close out the drawing then open it back up the drawing has been restored and the symbol will be at the location that I had placed it at. With the same drawing, I don't have these problems with 2012.
View 1 Replies
View Related
Sep 7, 2012
I recently upgraded from Autocad 2012 Mechanical. Previously, I was able to simply select objects in AC, ctrl-c them, then paste them into Word. I am now using 2013 Product Design Suite, with the Vault addin for word. I am now unable to do this. What I notice is that when I switch to my Word window and paste, there's some unknown process occurring in Autocad. Furthermore, what should be an image box with my drawing in Word is a blank box.
AutoCAD: 2013 Product Design Suite, using 2013 Mechanical.
Word: 2007, Service Pack 2.
View 6 Replies
View Related
Aug 6, 2012
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
View 6 Replies
View Related
Jan 31, 2013
...still happening in 2013...any answers out there? I'm getting pretty tired of redefining blocks (sending the wipeout to the back of the draw order) after pasting them into drawings.
View 4 Replies
View Related
Jun 13, 2013
When I save as DXF, I have to manually go into options on the save tab and click "default DXF configuration," otherwise it exports the file as a ZIP folder. I can't figure out how to save the configuration so I dont have to manually do that everytime, im sure it something simple, as it usually is..
View 2 Replies
View Related
Aug 12, 2012
is it possible to copy and paste parts in an assembly but also keeping any constraints set on the part?
I.e. if I had a square block constrained to a flat face of a floor, when I copy and paste the block many times I would like all the copy blocks to still be constrained to the floor.
View 1 Replies
View Related
Jun 27, 2013
I have one big problem copy and paste symbols in one idw to another idw it takes to much time.it's possible through macro or ilogic for copying symbols in drawings?
View 4 Replies
View Related
Jul 24, 2012
Okay I've been building random things to teach myself how to use Inventor and right now I'm stuck on a rim I'm creating. My question is.. is there a way to copy and paste a lofted item since there are three parts to it (2 planes and 1 guide) because I need 4 more spokes and if I copy the loft it copies all three parts seperately. Then when I paste and orientate the small end of the loft to the plane I want it tells me "Unsatisfied Geometric Inputs".
View 4 Replies
View Related
Jul 24, 2013
Ever since updating to the latest service pack I can no longer copy and paste leaders inside a drawing.
I used to be able to set up the leader I wanted and then copy and paste to all the parts I wanted to assign it to but I can't paste anymore.
I am using the iproperties data within the text box..
Inventor 2013
View 2 Replies
View Related
Apr 30, 2013
I have a one rectangular block(Control cabinet) it consists of around 100 sub rectangular blocks here problem is in my part user wants few blocks in different dimensions and different positions some time. So I created one sketch in my sketch plane then user wants more features on rectangular block then I want automatically copy and paste on same plane same sketch and same time automatically asking for dimensions(positional, length and width).
View 3 Replies
View Related
Sep 10, 2012
I did a sketch in an idw that is not attached to any view. I wan't to copy it somehow to another idw. But when I right click, copy and/or paste are not available for me to complete to process.
I tried creating a symbol using my already made sketch since those are easier to copy/paste between files. But I don't know how to proceed without recreating my sketch.
View 9 Replies
View Related
Sep 10, 2013
I have a sketch on the global ZY plane. I need a copy of the sketch on some other plane.
But when I copy the sketch and paste it to the other plane, the sketch seems to rotate.
It is pasted not the way I would like. And I see no method to rotate it into the correct position.
It's probably easy, but I do not see it.
View 2 Replies
View Related
Feb 25, 2012
I'd like to copy the ilogic text & keep it's colour format - what will do this?
View 1 Replies
View Related
Jan 10, 2014
If you want to re-use a Frame Generator member in ANOTHER assembly to save creating more files you might want to use copy-paste.If you do then you find you can't delete this member or other ones that have been copy-pasted into that assembly.
Oddly enough if you use "place component" you CAN delete it.I am using Inventor Professional 2014 Service Pack 1 Update 1.
View 4 Replies
View Related
