we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
...still happening in 2013...any answers out there? I'm getting pretty tired of redefining blocks (sending the wipeout to the back of the draw order) after pasting them into drawings.
View 4 Replies View Relatedwhen i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
I'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
I recently re-installed my AutoCad 2002 on an XP-SP2 computer.
I used to be able to do a windows copy or copy with basepoint and paste the item into another drawing.
Since I put AC on the XP computer, this does not work.
Is there a way to copy a viewport with all its layers setup from one drawing file to another drawing file?
I can copy the viewport and activate it, but the layers setup for that viewport goes to default. So it turns everything on.
I can't make a layer state in the old file and import in new file, because the new file does not have all the same layers. So not all my layers would be turned off in the viewport.
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies View RelatedI cannot seem to paste into this one drawing that a client has issued to me. I can paste into all associated x-refs just fine, but the main drawing is the issue. Before we get into things I have tried all the most common things already.
- I have checked layeer Visibilties and unreconciled layers.
- I have run audit and have purged/scalelistedit all drawings
- I have done almost everything ><
To sum it up I think it is global variable of some sort.
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
I still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:
- I have a drawing file, in metres, that I want to copy to another file.
- My second drawing, in inches, is where I want to paste the drawing from the first file.
Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.
I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried
-purge r, purge a, audit, save
-wblock explode, purge a, audit, save
to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
In some of my DWG files I can’t able to copy paste the elements from one file to another . For example, I can’t able to copy the level marks from one file to another. Both files are located in same coordinate.
View 6 Replies View RelatedIf I copy a single line from a file then paste it into a new file with nothing in it and save, I end up with a 3 or 4 meg file. I noticed when I paste the line into the new drawing, I get the following message over and over:
Substituting [simplex.shx] for [OA_Edina.shx].
Substituting [simplex.shx] for [OA_2007.shx].
We have files that are 20 or 30 meg that should only be 1 or 2 meg. Purge and audit in the .dwg does not work. One way to fix it is to dxfout then purge and audit the .dxf file, then save back to .dwg. The audit typically finds tens of thousands of errors. This process takes a long time and the problem comes back as soon as someone copies something into the file. We need a more permanent fix.
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
View 4 Replies View RelatedA few of the computers are having problems with the Copy/Paste function. They had it working a few times and after that, it stopped working (can't paste after copying). Have tried restarting autocad and the computer but the issue is still there. Have also tried updating the service pack to the latest version. It works for a while and stopped working again.
View 5 Replies View RelatedI can't copy/paste in my drawing.
I open new drawing, then press Ctrl+Shift+C to copy an object with a base point and then when i press Ctrl+V nothing shows.
It says Command: _pasteclip, but there is no object attached to the cursor to paste.
When I try to Copy & Paste an object from one file to another, appears following alert window: “This application has detected a mixed version of AEC objects participating in this operation. Newer AEC objects will be disallowed from participating in this operation”. And I cannot paste the object copied from other file. This happened to me when I work with Autocad2010 using drawings saved as Autocad2004 in Autocad2013.
Since I am working in a group of people that have different versions of Autocad, I need the solution for this problem.
I'm trying to build a sprite image for a website based on a graphic that I created with Paint.NET.
The graphic has about 6 different layers.
To make the sprite image, I need the items in one layer to be duplicated in the exact same spots only shifted down by an integral number of the height. So, if the original image is 400px, I stretch the canvas out to 1200px. Now I want to copy each of the 6 layers and paste them exactly 400px down, then copy each of the 6 layers and paste them exactly 800px down.
I'm guessing there is a way to do something like this using the scripting ability of Paint.NET, but I have never used that feature before.
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
View 1 Replies View Relatedi'm trying to do is copy some linework in a sketch i have on autocad 2011 (i havent upgraded it yet) and paste it into a sketch i have on inventor 2013.
Copy and paste works fine with other versions of inventor or autocad, but i can't use 2013 inventor for pasting.
When i attempt to paste the linework into my 2013 inventor sketch i recieve a long hefty error message:
"String resource could not be loaded (and is missing?) for id 5239 (error 2fee34a0)"
I have recently upgraded from LT2011 TO Architecture 2013. I always use perpendicular tracking when copy and pasting but when I want to copy (or paste) a certain distance perpendicular to that object it doesn't like it. It's tricky to explain but say I wanted to copy a block of a teble 1200mm from the original block I'd copy, hover over the basepoint and move my cursor in the intended direction and type in 1200 and enter. The previous version of AutoCAD worked this command fine but since the upgrade I'm having trouble. Surely it's something as simple as changing the drafting settings bit I've gone through them all and no luck.
View 3 Replies View RelatedUsing GIMP 2.6.11 under Windows XP
Is this real? I am really amazed that there is no way to do this. Am I missing something? I have multiple images, each with a unique background layer. On top are multiple other layers, both images and text layers. I was editing one and was about to save it but then realized it was on the wrong background.
All I want to do is select four or five layers from this unsaved image with Background A, copy them and then open an image with Background B and paste them in so there will be minimal issues with alignments and such. I have been editing each of these four layers and there are a fair bit of changes that have been made to just throw them away and start over. The background is not the only difference between the images, it is just what I use as a reference so copying that over to the unsaved image would also require multiple layer copy/pasting.
I have already tried linking the layers but any copy/cut/paste seems to only work on the active layer, unless I am again missing something. This seems like a really fundamental function to not be supported.
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies View RelatedWhen copying a symbol (control c) then pasting (control v) I can move the symbol to another location and left click to drop it. Many times when I do this the symbol disappears and you can't see it. If I re (regen) the the entire model disappears. I can close out the drawing then open it back up the drawing has been restored and the symbol will be at the location that I had placed it at. With the same drawing, I don't have these problems with 2012.
View 1 Replies View RelatedI recently upgraded from Autocad 2012 Mechanical. Previously, I was able to simply select objects in AC, ctrl-c them, then paste them into Word. I am now using 2013 Product Design Suite, with the Vault addin for word. I am now unable to do this. What I notice is that when I switch to my Word window and paste, there's some unknown process occurring in Autocad. Furthermore, what should be an image box with my drawing in Word is a blank box.
AutoCAD: 2013 Product Design Suite, using 2013 Mechanical.
Word: 2007, Service Pack 2.
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
I've started having a problem with the Publish command when publishing multiple drawings to PDF.
When I plot a drawing using the plot command, I don't have a problem.
When I publish one drawing using the Publish command it is also fine.
It is only when I try to publish multiple files that the problem occurs- the PDFs are produced, but the it is as if the drawing contents (paper space) has been shifted up by 10mm or so, cutting off the top of the drawing, and creating a larger margin at the bottom of the drawing. I use exactly the same page setup as for the single drawing plot.
There seems to be no setting that would change this, and the fact that publishing a single drawing works suggests that there is some kind of bug. At the moment i have to plot every drawing individually (or get my colleague to do it- it works fine on his machine, same page setup file!)
See attached example.
Combining multiple drawings in one go, I have 100 drawings (each has its layout) stored in 100 dwg files. I’m wondering if there is a way to combine them in one dwg file in one go assuming that they don’t overlap.
I need then to edit the title block of all of these layout knowing that this title block is an Xref.
i use Autodesk Autocad 2014 , version 18 I have the following problem I open one drawing and start my work Then i open another one and the first one gets delleted , the sheet remaining empty.
View 9 Replies View Related