i use Autodesk Autocad 2014 , version 18 I have the following problem I open one drawing and start my work Then i open another one and the first one gets delleted , the sheet remaining empty.
View 9 RepliesI usually open several drawing and use"drag and drop".
But something has happened.
Now, I can only open one drawing at the time. When I try to open the second drawing, the program close down the first.
What have I done ? and what shell I do ?
Currently when I open up multiple drawings (opening them up one at a time) they all appear in the same window (one instance) of AutoCAD.
I want each drawing to open in separate instances so I can view them on separate monitors (and close one without being asked to close them all).
I have tried changing the SDI system variable from 0 and 1 (and vise-versa)
I have tried changing the windows default program from AutoCAD Application to AutoCAD Launcher (and vise-versa)
I have set the TASKBAR system variable at both 0 and 1 (and vise-versa)
Windows 7
AutoCAD LT 2012
I've started having a problem with the Publish command when publishing multiple drawings to PDF.
When I plot a drawing using the plot command, I don't have a problem.
When I publish one drawing using the Publish command it is also fine.
It is only when I try to publish multiple files that the problem occurs- the PDFs are produced, but the it is as if the drawing contents (paper space) has been shifted up by 10mm or so, cutting off the top of the drawing, and creating a larger margin at the bottom of the drawing. I use exactly the same page setup as for the single drawing plot.
There seems to be no setting that would change this, and the fact that publishing a single drawing works suggests that there is some kind of bug. At the moment i have to plot every drawing individually (or get my colleague to do it- it works fine on his machine, same page setup file!)
See attached example.
Combining multiple drawings in one go, I have 100 drawings (each has its layout) stored in 100 dwg files. I’m wondering if there is a way to combine them in one dwg file in one go assuming that they don’t overlap.
I need then to edit the title block of all of these layout knowing that this title block is an Xref.
why Autocad 2012 opens one window per drawing as opposed to Autocad 2007/2008 opening one window for as many drawings as you have open. (I also don't care to group/ungroup similar programs through Windows 7.) This must be an Autocad 2012 program default that I can't figure out to change.
View 9 Replies View RelatedWhen I open a drawing, if I have other drawings open, the drawing I am opening does not come up maximized. I have to drag the edge up to fill the screen.
Is there a setting for having all drawings open up maximized? The first drawing I open always comes up maximized.
we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
I am trying to come up with a way to track a block or xref in multiple drawings. I have multiple drawings that have the same block in them and I was hoping that there was a way I could find out what drawings have the block without having to open up every single drawing.
View 2 Replies View RelatedI want to rotate multiple drawings to a custom rotation. I have figured out how to save my custom rotation so that I can get back to it in the same drawing file, but is there a way to carry that custom rotation over to other drawing files?
View 1 Replies View RelatedIt seems that once my newly purchased autocad lt. 13 opens up a drawing created by an other co-worker in autocad Lt. 11, it automaticly converts to 13 and now the person using 11 can no longer open the file. what I should do?
View 3 Replies View RelatedI have ACA 2013 (student version) running in the Windows 8 environment. I cannot open anything drawn in a previous release nor can I open a drawing created in ACA 2013 that was installed on the Windows 7 platform.
I have tried to drag in the drawings through design center. That worked for a while now when I try that it causes ACA to crash. Also I have tried multiple drawings that were created in several different versions of ACA. (2004, 2006 and 2009)
As a side note I was able to open those files in ACA 2013 running on the Windows 7 OS.
i had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
I have a Windows 7 machine running AutoCAD 2013. When trying to open any drawings from our AutoDesk Vault 2013 server, AutoCAD will hard lock/freeze and can only be closed by using Windows Task Manager. When accessing the same files through the Vault first, without opening AutoCAD, they open with no issues.
View 1 Replies View RelatedI am trying to write some VBA code to print several drawings present in a folder.
I am not a VBA expert. I wrote some little macros in excel but it is the first one in Autocad.
I have a small code that opens a drawing, counts it, closes it and then loops for other drawings.
I have a code that print a drawing by defining some printing parameters.
Separately, both work. But when I call the second one into the loop, I get a error:
"Run-time error '-2147418111 (800100001)':
Automation error
Call was rejected by callee."
I'm using Windows 7 and Autocad 2012.
See my code below:
Option Explicit
Dim filename As String
Dim filepath As String
Dim full_filename As String
Dim i As Integer
Sub print_trial()
[Code] ......
I'm having some trouble while copying between drawings. I am attempting to merge a number of floor plans which are all saved as seperate drawings into 1 drawing. However whenever I copy the floor plan over to another drawing, some of the lines/objects seem to be displaced.
View 4 Replies View RelatedI am new to AutoCAD and have to export many drawings to PDF format to send them out to clients. I was wondering if their was a Macro or some other way to export drawings into pdf form without having to open each file and pressing export to pdf button?
View 9 Replies View RelatedI am trying to plot multiple drawings all at once. I work with many drawing sizes varies from size A to size E. What would be the best way to plot all drawings to 11 X 17 paper no matter what size the drawings are set to? These drawings are not xref or anything. They all are separated files. I tried using Set Sheet Manager; it will only plot to whatever that size is. I want all drawings to be plotted on 11 X 17. I did some research in the forums here and was not able to find what I was looking for.
View 2 Replies View RelatedI have a multi sheet drawing I am creating. My BOM is on the first sheet.
I have noticed that when I place views on my subsequent sheets, the balloons restart from item 1 again. Is there a way to link them to the BOM on sheet 1?
(Colossians 3:23-25)
Can I save multiple drawings to dxf in same time? I`m so tired to click "save copy as" with every drawigs. Autosave with flat pattern is not an option because orientation of the piece is so bad so many time of the cases
View 9 Replies View RelatedI'm running ACAD Map 3D 2009. I have to run ONE custom macro on a number of drawings that are stored in a particular folder.
Basically all I need is to:
open
run custom macro
close
go on to next drawing.
I just don't know how to write LISP.
I have multiple cad drawings (300 *dwg's)that need some items changed, is there a way to seach multiple cad drawing in my project for specific instances of text in each drawing?
Do the drawings have to be open? Can you seach just thru the project with out opening each drawing, how does this work?!
I have amended our drawing frame (a block) in our templates so I now have a set of 82 I need to amend the frame in. So is there a easy way of redefining a block in a number of drawings or do I just do each drawing separate ?
View 3 Replies View RelatedI'm weaning myself off of Adobe's PDFMaker and learning how to publish.
I've got everything working but I'm prompted at an Adobe prompt (Save PDF File As...) for every sheet
which is overwhelming when I have multiple drawings with multiple sheets.
I don't know how (or if it is possible) to make it just save to the default name and continue onto the next one.
I need to change a text item in about 200 drawings. I would rather do this at one time if at all possible.
View 4 Replies View RelatedIs there a way to copy a viewport with all its layers setup from one drawing file to another drawing file?
I can copy the viewport and activate it, but the layers setup for that viewport goes to default. So it turns everything on.
I can't make a layer state in the old file and import in new file, because the new file does not have all the same layers. So not all my layers would be turned off in the viewport.
I am working on Data compliation and trying to extract data from multiple AutoCAD drawings. The data extraction wizard works well and extracts all the data from the drawing. I wish to segregate the data and want some certain set of data e.g. in P&ID drawing, I need only instrument Tags which are connected to DCS and likewise...
Is there any way to filter such kind of data and get the required results?
I have to revup a heap of drawings by modifying the drawing block of each drawing (simplying changing Rev C to a different letter ) and adding in todays date. Is there a quick way i can modify all drawing blocks without opening and modifying each drawing manually? Unfortunately, the drawings are all standalone and dont reference an external drawing block.
I am using Civil3D 2010
I've created an iPart (for this discussion, lets just say a cube..)with 6 variations of the same part (its height has a choice of 6 different values in the iPart table)..I've created a drawing (idw) which dimensions the cube in one of the 6 instances..
..Is there any way to replicate the drawing another 5 times, with each referencing each instance of the iPart?
I was imagining copying the drawing 6 times and change each one to look for a different instance (a bit like when you go component - replace in an assembly..) then the drawing to automatically update the altered dimension.
this would save me producing and re-drawing 6 separate idw files for the same thing where only one dimension changes each time!
I am trying to change text in hundreds of drawings. What I have is a line of text say "the brown fox" and I need to change it to "the black dog". I have probably 1500 drawings I need to do this in. I am not versed in scripts of lisp. I know the ACAD commands to do this but could develop a script file to batch this.
View 3 Replies View RelatedI am trying to import a sheet with multiple drawings on it from AutoCAD to a sheet in Revit but when I do so all I get are the lines showing the AutoCAD sheet and the drawing labels but no actual drawings. I have done this before and can't figure what is going wrong. I have the import options set to color: black and white, levels/layers: specify and unit: inch. I also don't have AutoCAD on my workstation and it is a very large hotel project with hundreds of specific details and sheets that I do not want and do not have time to change or redo.
The DWGs I have are all set up as sheets and I don't have any individual details or drawings of the project not already set up as an AutoCAD sheet. I thought I could make the process simple by just importing the DWG sheet with all drawings to a Revit sheet at the correct scale, explode the layers, delete what I don't need and be done, this is NOT the case. Also I can get access to AutoCAD on another workstation after hours .