When I open a drawing, if I have other drawings open, the drawing I am opening does not come up maximized. I have to drag the edge up to fill the screen.
Is there a setting for having all drawings open up maximized? The first drawing I open always comes up maximized.
How can I open the Illustrator CS 6 in the full screen mode. The program opens every file in the minimized mode and I think it's annoying when I have to clcik the full screen every time.
View 4 Replies View RelatedI recently installed / upgraded to CS5.1, set up all my preferences, keyboard shortcuts, presets, plugins. All worked fine, day in - day out, for the last three weeks. About three days ago this anomaly appeared...
When I zoom in (cmd +/), the window will resize, but only part way. The window will move over flush right on the monitor, but leave about one inch of space between the window and the left side of the monitor, and increase in size until it fits aprox 2/3rds of the monitor / screen. It stops enlarging and leaves about 3 inches of space between the window and the bottom of the screen. At that point I get scroll bars. So I end up with a much smaller window to work in.
I can grab the bottom right corner of the window, pull it open to fill the screen, but as soon as I go to zoom in or out, the window jumps back to the smaller size with the gap on the left side and bottom.
Option bar is "Standard Screen Mode"
All my pallets are on a separate monitor, so nothing else is on my main monitor that would limit the size of my window as I zoom in.
My preferences are set to:
• Zoom Resizes Windows
• Enable Flick Panning (works fine)
• Animated Zoom
OS 10.5x
10GB ram
I don't know if I inadvertently changed something to cause this.
When I open an Illustrator document it opens full screen - meaning the top left corner of the document is at the very top left of my screen, (behind my tools) - and the bottom right is at the very bottom right of my screen (and behind my palettes).Is there a preference setting so that a file would open in the middle of my screen - NOT full screen?
View 11 Replies View RelatedWhen I open illustrator CS6 or InDesign I always want to be able to view my desktop so I can access files. Why has CS4, 5 and 6 gone full screen when you open files. Is there a way to prevent full screen mode? I am getting so tired of dragging the bottom right corner to make the window smaller. I'm using a mac, 10.7.5
View 3 Replies View RelatedI always use LR in full screen mode. But every time I open it, it always opens in the collpsed small window mode. Never the full screen way I closed it. Is this designed in, or is there a setting someplace I just have not found?
View 4 Replies View RelatedI usually open several drawing and use"drag and drop".
But something has happened.
Now, I can only open one drawing at the time. When I try to open the second drawing, the program close down the first.
What have I done ? and what shell I do ?
Currently when I open up multiple drawings (opening them up one at a time) they all appear in the same window (one instance) of AutoCAD.
I want each drawing to open in separate instances so I can view them on separate monitors (and close one without being asked to close them all).
I have tried changing the SDI system variable from 0 and 1 (and vise-versa)
I have tried changing the windows default program from AutoCAD Application to AutoCAD Launcher (and vise-versa)
I have set the TASKBAR system variable at both 0 and 1 (and vise-versa)
Windows 7
AutoCAD LT 2012
i use Autodesk Autocad 2014 , version 18 I have the following problem I open one drawing and start my work Then i open another one and the first one gets delleted , the sheet remaining empty.
View 9 Replies View RelatedI can't open the full screen view/edit option in the organizer. It keeps 'pinging' me...
View 1 Replies View Relatedwhy Autocad 2012 opens one window per drawing as opposed to Autocad 2007/2008 opening one window for as many drawings as you have open. (I also don't care to group/ungroup similar programs through Windows 7.) This must be an Autocad 2012 program default that I can't figure out to change.
View 9 Replies View RelatedI have to revup a heap of drawings by modifying the drawing block of each drawing (simplying changing Rev C to a different letter ) and adding in todays date. Is there a quick way i can modify all drawing blocks without opening and modifying each drawing manually? Unfortunately, the drawings are all standalone and dont reference an external drawing block.
I am using Civil3D 2010
I can't figure out how to adjust the size of the program screen when in Full Edit Mode. I can see portions of the Quick Fix menu and none of the Guided Fix menu. There seems to be no way to resize the window.
View 5 Replies View RelatedWhen using the Associate Project to Current Drawing or Associate Project to Multiple Drawings command(s) where does this association data get stored? When using the Multiple Drawings option I do not see the save time/date being modified on the individual DWG's.
I also do not note any file being modified under the shortcut working folder which would contain associated drawing names. How does C3D "know" what project a file is associated with?
I'm running 2013 C3D and have a quirk that my drawings zoom out when I first open the file. I'm not even sure what they are zooming out to as it is not 'Extents'.
View 9 Replies View RelatedI can't open a drawing I saved yesterday afternoon. I always get a fatal error after reaching 98%. When i try doing recovery I get a message that is something like a program failure.Is there any way to open that drawing?
View 9 Replies View RelatedI'm a bit of a Newbie to Paint.net. Is there any way to have multiple images open at the same time on ythe screen -- and to be able to select parts from one image and paste them in another -- that sort of thing?
View 3 Replies View RelatedThe screen flickers when I move the mouse around an open drawing. I just applied the latest patch to Civil 3D 2010. It was not doing this before the patch.
Have Quadro 3500 video card. Updated the driver for that with no change.
Have a Logitech wireless mouse, M310. Up dated the driver for that with effect.
Changed to a wired mouse, no change.
Is there a setting in Autocad where I can set the refresh rate so that it does not refresh while moving the mouse. Or at least slow the automatic refresh rate down?
I have AutoCad LT and I can't find a way to scroll through folders full of drawings without opening each one. I have the Autocad Viewer but I can't find a way to make it do this, what are you pros doing, I know there has to be something out there. The rest of the world has way to view file i.e. Photoshop has Bridge, Nikon Has View NX, I do photography and there's a ton of ways to view images even at full res .
View 9 Replies View RelatedI have an open cut area with 8 meter height and a bench of 5 meter for the first 3 berm, on the 4th berm the bench will become 10 meter. Is there any way to build it in assembly? I attached 2 drawings to clarify the problem.
View 1 Replies View RelatedI have been using the sheet set manager with very few problems for years until - you guessed it - I was upgraded to Windows 7 OS v6.1 and Civil3D 2012 IDS.
Up until then, I was able to open layouts in different drawing files through the sheet set manager while in an open file. Now, I get an error message (see attached) and have to close the file I'm in to open the other.
I can open files through the regular file open command and have more than one open at the same time, but it takes away the convenience of using the sheet set manager to avoid having to browse to the desired sheet layouts when copyclipping sheet layout drawing elements from one file to another.
I have studied every sheet set system variable to see if that was the problem, but could not find an answer. I have the same problem in Civil3D 2010. It happens to new and existing sheet sets in both versions and sheet sets made before the Windows update.
I cannot get the Full-Screen Tracking Vector to display. I toggle the button in Options>Drafting and hit apply, but nothing. Help says that the Track path System Variable should be = 1, but when the button is on, the Variable = 0. If I set the Variable = 1, it shuts the button off.
View 2 Replies View RelatedI have autocad 2000i and can't open two drawings on the same screen. The book I am reading currently is autocad 2002: no experience required. In the book it as to open the drawing that I am currently working on and a new drawing after, then choose window>tile vertically. That doesn't seem to work for me. Also, when I click on window ther is only the active file on list instead of two or others that I have previously opened. I think I am stuck. Maybe there is something to change in the options for the allowance of more than one file to be on the list so then it would become possible to allow a split screen of two different drawings.
FIGUERED IT OUT! tool>options>system>single-drawing compatability unchecked.
Can I run Video Studio Pro X4 at other than full screen? While working on a project, full screen is fine. But, once I start rendering I'd like to have my PC back and do other things and have VSP render in the background. I opened the preferences dialog, could find nothing relevant. Doesn't appear to be the normal windows shrink button in the upper-right, only minimize which takes VSP totally off screen.
Running Win XP SP3.
With CS I was able to press F+TAB to get a blackbackground screen for viewing my work ,why can't I do this with CS2 or is there another combination for CS2?
View 1 Replies View RelatedI'm getting the impression that I am behind the times, or else in my own world about how people use Photoshop- what happened to hot keys in full screen?
-Premise: I like working in full screen mode. I see only my composition, and access all of Photoshop's functionality with hotkeys.
It used to be that, in Full Screen mode, one could press alt+f to access the file menu, or any other menu using the correct letter. Is there anyway to get the same results in Photoshop without leaving full screen? What happened to alt+'space' to access the common Windows Application menu for things like Minimize, Maximize, Move, Close, etc? I see that I can click on the PS icon at the top right, but this is not the same: consider those of us who use multiple monitors, sometimes the application closes on one monitor and then is re-opened when that monitor is no longer present. In cases like these, the application is stuck on a non-existent monitor with no way to use it. Alt+'space' used to be the solution for this.
I download avi files and then edit them in Videostudio X4. THe avi's are always from different resolutions and framerate.
When i play the converted or edited avi files on my mediaplayer on a Widescreen tv then the video is played may time not full screen. Sometimes it is on top and sides filled with black borders.
I would like the video's always be full screen on tv (off course with good quality).
My question is: how can i see in Videostudio if the video can be played full screen on tv?
Let's say i have 2 video's: divx / xvid 576 x 320 at 25.000 fpsec and 512 x 384 at 188.900 at 25.000 frames per second. Would these files be played full screen on the tv?. How can i calculate that it is 4:3 or 16:9 and what must the preference be in Video studio itself: 16:9 or 4:3?
I have made a movie and its 2 hours long,i knew trying to save this to a 4.7 gb dvd I would lose a little quality, well I'm impressed with the results, but for some reason the finish movie isn't full screen, now I know its saved at 4:3 not 16:9, and with 4:3 I expected to have space on both side of the screen when watching it on a TV or computer . But I also have quite a bit of space on the bottom and top as well. Here the properties of my project.
View 3 Replies View RelatedI have been using Ulead Video Studio 6 for years creating slide shows and burning them to DVD. While playing DVD, made in Ulead Video, the slide show would display in full screen on any TV (for example a horizontal picture would be displayed in full screen and vertical picture would be displayed from top to bottom exposing some black background on the sides which is OK). Now I am using Video Studio Pro X3 and after I create a DVD there is a black background around each photo during playback. In other words, each photo seems to be slightly reduced in size or there is a black border around it during playback of DVD.
View 7 Replies View RelatedIn CS4 Full Screen Mode adjustments to layers /filters etc.
can cause odd looking grayed out file name at top of window.
When I press F for Full Screen and then the fwd. slash to see before/after nothing happens. Is this normal, if so it would be nice to see before and after in full screen.
I'm trying this in LR5 beta.