AutoCAD Civil 3D :: Any Way To Open Drawings With Fatal Errors?

Jan 19, 2010

I can't open a drawing I saved yesterday afternoon. I always get a fatal error after reaching 98%. When i try doing recovery I get a message that is something like a program failure.Is there any way to open that drawing?

View 9 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Fatal Errors When Editing Large Amounts Of MText

May 16, 2013

Fatal Errors when editing large amounts of MText? I usually have to insert a good amount of drawing notes that we keep in word documents on our network and i find that the process of editing them causes me to Fatal Error when trying even the simplest edit, like erasing a sentence or changing a name.

How to edit the document in word before copy/pasting it into CAD, but the documents are locked for editing as is our standard practice for the general notes that we use.

I am going to make a dummy drawing in hopes of making my changes in an empty drawing, (although I strongly feel this is not a file size issue but a word to CAD translation issue).

View 8 Replies View Related

AutoCAD LT :: 2012 - Open Drawings - Errors Found

May 24, 2012

Every drawing I created using LT 2009 opens now with "Open Drawings - Errors Found" window telling me the drawing has xxx numbe of errors and asking me whether to continue or close and recover. Why is it doing this?

View 6 Replies View Related

AutoCAD LT :: 2007 Fatal Exception Errors On Saving

Aug 17, 2012

I created two new projects yesterday and both of them had fatal exception errors on closing and they did generate a message that was sent to you.

I have not been able to open them or recover them. How can I recover these documents.  I've tried to open them in AutoCAD WS... but they fail on upload.  I've tried to attach the files, but it says they are too large.

View 5 Replies View Related

Revit :: Architecture 2013 Frequent Fatal Errors

Jul 5, 2012

I am having very frequent recoverable errors - havent seen any pattern but happens in veiws and mostly editing operations. I am filling in the error reports and there must be quite a collection now of mine.

View 4 Replies View Related

AutoCAD Civil 3D :: Drawings Zooms Out On Open

Jun 26, 2012

I'm running 2013 C3D and have a quirk that my drawings zoom out when I first open the file.  I'm not even sure what they are zooming out to as it is not 'Extents'. 

View 9 Replies View Related

AutoCAD Civil 3D :: Open Multiple Drawings To Full Screen

Feb 2, 2007

When I open a drawing, if I have other drawings open, the drawing I am opening does not come up maximized. I have to drag the edge up to fill the screen.

Is there a setting for having all drawings open up maximized? The first drawing I open always comes up maximized.

View 3 Replies View Related

AutoCAD LT :: 2012 - Fatal Error / Numbers Differ Between Drawings

Nov 27, 2011

I have a set of drawings that are dwg's that have a dwf referenced/attached in. When I try to print, I get the following error.

FATAL ERROR: Unhandled Access Violation reading0x2573d000 Exception At 4f6c133fh (the numbers differ between drawings) I can plot all other CAD files with no problems, just this set.

View 9 Replies View Related

AutoCAD Print / Plot :: Randomly Get Fatal Error Every 10 To 15 Drawings That Print?

Aug 23, 2011

When I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.

View 1 Replies View Related

AutoCAD Inventor :: Programmatically Suppress Dialogs Or Warnings And Errors When Open It?

Nov 18, 2011

Is it possible to programatically suppress dialogs or warnings and errors when I open Inventor?

View 1 Replies View Related

Photoshop :: CC Errors And Won't Open?

Sep 23, 2013

I downloaded Photoshop CC the other day, and it worked fine. Today when I try and open Photoshop I am getting a multitude of errors about ‘FastCore Routines Module’, ‘MMXCore Routines module’, ‘Multiprocessor Support module’, and then that it could not ‘initialise Photoshop the internal file signature is incorrect’.

View 2 Replies View Related

AutoCAD LT :: FATAL Error - Out Of Memory / Automated Recover Files Won't Open

Jul 9, 2013

When I try open a saved CAD LT 2013 file I get an Error message saying 'FATAL ERROR: Out of memory'..The file had crashed while I was working on it and the automated recover files won't open, says: 'drawing file invalid'

I can open other files.What does this mean and can the file be recovered?

View 9 Replies View Related

AutoCAD Civil 3D :: XML Parcel Legal Description Errors

Oct 12, 2010

While generating a General Legal Description for Parcels xml report for a parcel with numerous tangent curves, reverse curves and compound curves, the report labels all of them as non-tangent.Also, I write my legal descriptions for curves by citing the bearing and distance OUT to the radius from the beginning of the curve, but the routine gives me the bearing and distance IN from the radius. It is using the code {curveStartDirection}.

Is there a different code I can use that would give me the opposite bearing? Is there some resource that lists all these codes for parcels?

View 9 Replies View Related

AutoCAD Civil 3D :: Survey Database Creation Errors

Oct 3, 2012

I have a 64-bit Windows 7 computer that we are running Civil 3D 2013.  We have attempted to create a survey database but get the attached .NET error. 

Repairing the .NET throught Control Panel as well as running the Microsoft .NET Repair Tool.  (After repairing the .NET we would get another error shown below)We have changed the UAC (User Account Control) for Windows 7We have also tried to find any .LDB for the database and did not find any Checked the folder settings which this user is an admin on his computerWe also created a survey database from other computers which are using WindowsXP 32bit and he was not able to access the database that way either Second error: 

'DbProviderFactories' section can only appear once per config file error

View 2 Replies View Related

AutoCAD Civil 3D :: Intersection Circular Dependency Errors

Dec 20, 2012

We have recently made the switch to Civil 3D for our firm and are running into some issues with intersections.  I am getting an error stating that "The primary road for this T-junction will result in a circular dependency with the existing intersections."  When trying to make an intersection at the middle intersecting road of the northern road going across the top of the screen in the attached image.  The norhtern road is defined as secondary at both endpoints and the intersecting road is defined as primary at the previous intersection.  At this intersection the northern road will need to be primary and the intersecting road secondary.   I would prefer not to break up my alignments as you lose some of the dynamic nature by doing that and vertical curves can become an issue. 

I am running Civil 3D 2013 64-bit. 

View 1 Replies View Related

AutoCAD Civil 3D :: PGP String / Alias Errors - Bad Argument Type

Oct 29, 2012

I have been working in Civil 3D 2013 for about two weeks and everything was going smooth until I got a fatal error message while trying to rotate a basic rectangle. When I reloaded AutoCAD Civil 3D my command line displayed the following error message:  "AutoCAD menu utilities loaded.; error: bad argument type: input-streamp: nil”. My drawing loaded normally but when I tried to draw a line using L+Enter I got a note saying “Command: L Unknown command "L".  Press F1 for help.” Now none of my aliases work and when I go to Express -> Tools -> Command Alias Editor from the menu bar, I get the windows that are on the attatched screen shot. The PGP files wont work and importing aliases gives me the top right box on the attatched image. I have tried adding a Support File Search Path from the options menu and that too has failed.

View 2 Replies View Related

AutoCAD Civil 3D :: Errors From Mixing Data And External References

Aug 20, 2013

Here is the background.  

A "MODEL" drawing exists that contains only the surface model.  The surface model is data referenced into a "LABEL" drawing that contains the surface style (contours), contour labels, and spot elevations.  This "LABEL" drawing is xref-ed into a "SHEET" drawing that contains the title block and some other xrefs containing the proposed layout, ex cond, etc..

When I open the "LABELS" drawing, the data reference works.  My problem is that when I open the "SHEET" drawing, the contour labels and spot elevations cannot find the referenced surface and just contain a string of 20 or so characters.

I already have a workaround.  If I open the "SHEET" drawing, then open the "LABELS" drawing and save it, I can reload the "LABELS" drawing within the "SHEET" drawing and the problem is solved.

HOWEVER, I have a bunch of sheets that I want to publish, and publish does not work when you have to open the file and re-reference everything.  Is there anyway to get this reference working correctly so that I do not have to open multiple drawings to get my data correct?

FYI, I have already tried resetting my data shortcuts project folder, validating data shortcuts, etc. in the "LABELS" and "SHEET" drawings.

Civil 3D 2012, SP 2.1

View 2 Replies View Related

AutoCAD Civil 3D :: Offset Alignments Vertical Curve Errors?

Jun 3, 2013

I have centreline alginement and have used the offset alginemnt command to get other alignments for other surfaces (need these as they have all different crossfalls). Now as o go along I reference the veritical profile of  the new alignement (created via offset) to my previous surface. Each time i do this the vertical profile does not seem to match my original profile of the centreline alignment.  Now as i have about 6 offsets and as i move along these error seems to grow even bigger. how this is avoidable or if this is output is unavoidable

View 5 Replies View Related

AutoCAD Civil 3D :: Point Cloud File Indexing Has Errors

Apr 19, 2012

When I try to index a Faro fls or fws file the process fails with the error message "Point Cloud File Indexing has Errors".

Civil 3D 2012
HP Z210
OS Windows 7 64 Bit
Core i7 16GB Ram

View 1 Replies View Related

Photoshop :: Cannot Open Anything But PSDs And JPGs And Plugin.dll Major Errors

Oct 22, 2006

I have tried and tried again but there is something preventing me from opening PSDs and JPGs. Along with that, when I first start up the program, I have about a thousand errors all having something to do with Plugin.dll.

View 1 Replies View Related

AutoCAD Civil 3D :: Fatal Error When Trying To Plot?

Nov 12, 2013

I am currently using ACAD Civil 3D 2014. When I am in paper space and try to plot I get a Fatal Error before I even get to the plot menu. This is only happening in 2 specific drawings and I've done a purge, audit and drawing recovery. With 8GB of Ram there should be more then enough to at least plot a 5MB drawing.

View 4 Replies View Related

AutoCAD Civil 3D :: 3D Orbit Causes Fatal Error

Nov 15, 2013

Sometimes 3D orbit works perfect, and sometimes it causes a fatal error before you even get started with it. I originally thought it was just large 3D objects causing it, but now I think it's just a 2014 issue...because I've had simple 3d surfaces (3d polyline with a surface) that have caused it to crash, yet have other larger surfaces that orbit without issue. I'm mostly using it to compare 3D polylines to surfaces, usually on as built alignments that we're working on.

View 9 Replies View Related

AutoCAD Civil 3D :: Fatal Error Using DesignCenter

Jun 14, 2012

I'm working in Civil 3D 2013 and am attempting to bring in notes and blocks from a .dwt, using DesignCenter.  As soon as I drag a block into my current drawing I receive a fatal error message and Civil 3D closes.  I do get the option to save a recover file.

View 8 Replies View Related

AutoCAD Civil 3D :: Fatal Error On Opening A Drawing

Dec 30, 2013

I am getting a error when I open a specific drawing

FATAL ERROR: unhandled e06d7363h Exception at fel14940.

I have tried to recover the drawing (message says error were found and then I get the same error)

tried the back up file ...no go

tried a back up file from 2 weeks prior, same result.

Have tried inserting as a block to a new drawing... same error.

View 4 Replies View Related

AutoCAD Civil 3D :: Pipe Network Fatal Error

May 22, 2012

We are having trouble with one of our C3D 2013 seats crashing (giving a fatal error) when trying to edit or do anything with a pipe network. The drawings work fine on other computers. I am trying to keep from having to remove and reinstall the software.

View 5 Replies View Related

AutoCAD Civil 3D :: Alignment GripOverrule Fatal Error

Dec 27, 2012

When you start move after hover on a grip point which created by GripDataCollection.Add(myGripData) in GetGripPoints(Entity entity, GripDataCollection grips, ...) appears Fatal Error: Unhandled e0434353h Exception at fdbebccdh.

I try Overrule GripPoints for Alignment. For FeatureLine it works.

Possible, the reason is that Alignment is AlignmentEntityCollection and different approach is required.

public class GripVectorOverrule : GripOverrule {
    // A static pointer to our overrule instance
    static public GripVectorOverrule theOverrule = new GripVectorOverrule();
    public override void GetGripPoints(Entity entity,
    GripDataCollection grips,
[Code] .....

View 5 Replies View Related

AutoCAD Civil 3D :: Fatal Error On Surface Smoothing?

Apr 25, 2013

I am having an impossible time smoothing a surface created from feature lines in the attached file. I can smooth the service in parts except for the area that I’ve hatched – as soon as I try to smooth that area the drawing freezes or I get a fatal error. Ideally I’d like this surface to smooth to a 3x3 grid.

The things I’ve tried:

-          Exploding the feature lines to 3d polys and recreating them as feature lines before adding them back to the surface.

-          Copying the feature lines to a new drawing and creating a new surface

-          Completely deleting the feature lines and manually re-drawing them from scratch before adding them to a new surface.

-          Adding the feature lines with different supplemental distance and mid-ordinate distances (typically I do 2’ and 0.01’ respectively)

-          Smoothing the surface in sections instead of one global smoothing of the entire surface (it always fails when I get to the hatched area)

-          Smoothing the surface with different grid dimensions.

-          Emailing the drawing to coworkers to see if they can create the surface and smooth it on their computers

-          Combinations of all of the above.

64-bit HP Desktop - HP Z420
Intel Xeon CPU E5-1620 0 @ 3.60 GHz
24GB RAM
AMD Radeon HD 6570
Windows 7 SP1

View 4 Replies View Related

AutoCAD Civil 3D :: FATAL ERROR When Opening Sheet Set?

May 11, 2012

I just changed my startup setting from 0 to 2 because I do not ever need a blank "Drawing 1" to work off of. Now I am wondering if that screwed something up because when I boot up AutoCAD and immediately try to open a Sheet Set, I receive the attached messages and then AutoCAD crashes. Is this a bug that needs to be fixed?

View 4 Replies View Related

AutoCAD Civil 3D :: Reinstalled 2011 And Still Have Fatal Crash

Jul 23, 2012

Civil 3D 2010 was crashing for an employee.  I uninstalled Civil 2010 and attempted to install 2011.  He still has a fatal crashing error.  I also removed his temp files.

View 7 Replies View Related

AutoCAD Civil 3D :: COGO Creation Fatal Exception?

Aug 19, 2013

Here is what I am trying to do,

I am working on an application, where the user would would choose 

Category of point

Sub-category of point

Then click on a Button

1. Which then querry SQLite DB based on the querry a COGO point with relevent RDesc in inserted.

2. A suitable block is inserted in the same location.

3. Updates the handle for the block to the COGO UDP

Now I have commeted the last part of updating UDP.

I have issue inserting COGO.

Sometimes it works some time it throws fatal exception, object instance is not set. I am unable to catch the fatal exception. 

Mini Dump - The thread tried to read from or write to a virtual address for which it does not have the appropriate access

Here is the code,
 
Global.variables.spt_current_COGO_pt = null; PromptPointOptions ppo = new PromptPointOptions("
Select the location to Create a Smart Point : "); PromptPointResult ppr = Global.variables.ed.GetPoint(ppo); if (ppr.Status != PromptStatus.OK) return false;
[Code] .....

View 5 Replies View Related

AutoCAD Civil 3D :: Getting Fatal Error When Try To Change Anything In A Drawing

Nov 5, 2013

I get a fatal error message: Unhandled Access Violation Reading 0x7ffffffd Exception at 6d9cc265h when i try to do anything in a drawing.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved