When I try to index a Faro fls or fws file the process fails with the error message "Point Cloud File Indexing has Errors".
Civil 3D 2012
HP Z210
OS Windows 7 64 Bit
Core i7 16GB Ram
I am trying to index an ascii type Point Cloud. The file is exported from GOM Inspector program and file extension is asc. There are some parameters in GOM for exporting the point cloud. For example you can chose "," or "." as separator. I believe the problem lies in this area. I believe the syntax in my file is wrong. I have tried to find instructions of the file format / syntax.
View 1 Replies View RelatedMy surveyor gave me a Trimble .tsf point cloud file....how do I convert that dude to an AutoCAD .las file?
View 2 Replies View RelatedI have been searching for a solution to a problem i have been having. I have a point cloud, and I am wanting to TIN it to create a surface.
When I use the Create Surface tool, no dialog box appears. Everything I have found seems to rely on this Dialog Box. How to get it to display?
Using AutoCad Civil 3D 2011.
Point Cloud Index fails on Faro Scans that work in 2012???? Tools in 2013 seem better. Civil 3D and Point Cloud data.
View 4 Replies View RelatedUsing Civil 3D 2013, Faro Scene 4.8.2.25521, Kubit PointCloud Pro 8.0.4.7.
Is it possible to turn off the bounding box on a non-Civil 3D, .PCG point cloud that was indexed into Civil 3d directly from the Faro .FWS file using the "POINTCLOUDINDEX" command?
How can I rotate my point cloud to have the front view on the top. I want to optimize the surface creation on the lateral surface of a deck and not on the ground (top) surface. I think to rotate 90 degrees on the X or Y axis.
View 3 Replies View RelatedCivil 3D point cloud tools (ribbon) are different than AutoCAD's. Is there a way to bring up AutoCAD's point cloud ribbon in addition to Civil 3D's ribbon?I guess if the commands are the same, I can just copy the ribbon from AutoCAD's CUI and plop it into Civil 3D's CUI.
But, is there a better way or is there something I'm missing?I'm looking for the clipping tools and the point cloud display otions (scan colors, elevation, normal, intensity, etc.)
I am working with a Lidar dataset that is over 34 million points. It covers an area far larger than I need for our project. I have experimented with point clouds and am able to process and generate a surface from the data by applying a clip boundary to the surface. The problem with this is the surface only has about 540k points out the total dataset and it appears that the points have been greatly reduced in density. I am thinking this is due to the way C3D limits large data sets to display only 1.5 million points and thus my surface data is highly filtered since it is extracted from a small area of the dataset. I have tried setting point cloud display to 100%.
can I somehow filter my point cloud so that I can reduce the area of coverage and thus increase the density that is extracted into my surface?
while i am trying to load my point cloud files the points appeared in the model but not all points
i entered to the setting of the point cloud from the toolspace toolbar , i found that there are about 32 million points but only 700000 points are displayed in the drawing. Is there a way to display all the loaded points in my drawing to show all the points since i need to render a high resolution pictures for my lots.
Any (simple) raw point cloud data file.
View 2 Replies View RelatedI have a point cloud with 161 million points in it. This is basically fine and works well but I need to create equally high resolution surfaces from certain regions of the point cloud. No matter what size I choose my export shape, it will only create a surface from a ridiculously small 750,000 odd points, a 'feature' which has been documented on these forums before. I have POINTCLOUDDENSITY set to 100.
My question is, how can I build a surface from this high resolution point cloud data that has more than 750,000 odd points?
I'm thinking about mosaic'ing - ie. making several smaller surfaces over the required area and pasting them together.
2012 SP2. I get this very descriptive message while trying to create a point cloud: The following error occurred processing the point cloud data: An error ocurred in data processing.
I've previously created point clouds from the same data (ENZ comma delimited) without a problem. I believe this was done before applying SP2. Any problems creating point clouds since SP2?
I might be missing somehting completely, but I am reading with Civil 3D 2013 you should be able to clip a Point Cloud, but I am not seeing the clipping panel under the point cloud tab.
View 1 Replies View RelatedI see that the Point Cloud Feature Extraction is now part of the Productivity Tools for Civil 3d 2012. Are these tools available in 2013? I am not seeing them anywhere. It seems goofy that there would be more tools available for the old release - what's the incentive to make the switch? Would you expect they will be available for 2013 sometime soon? I'm not complaining, I really like 2012
View 4 Replies View RelatedSee pic. Top pic is 2013 point cloud properties. bottom pic is 2011 point cloud properties. 2013 has a new 'point cloud adjust' option in properties.
Both drawings have same 'Lidar Classification' Style, but 2013 is all gray. I tried changing some fields inside the properties for 2013 under the point cloud adjust to no avail.
why this is like this and what I need to do to see the different colors for the different classifications.
I'm hoping this could be a quick fix without completely reinstalling CAD.
I jammed too much LiDAR data into my Index file for point cloud data, and now I can not even open it. Even new drawings are trying to open the overall index with everything in it.
What I want to do is just delete the whole thing and start fresh again, but not sure how to do that. If I could open it once I could start deleting stuff from it, but it is too large to even open.
I have a surface based on a point cloud. I decided to add a few more tiles of data to the point cloud and was expecting that the surface would update (after rebuilding) to include the new extents - but there was no change. The surface doesn't have any boundaries or breaklines but does have edits.
Do I need to add points to surface again? Will this duplicate the orignal point data or would it just add the new data. I didn't want to lose my edits if possible.
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
It was in Feb - March 2012. I was then using AutoCAD Civil 3D 2012. I had faced a problem of getting ground data for a large surface by using satellite imageries processed by some government wing of USA (NASA?), have lost track of it.
View 6 Replies View RelatedI have a point cloud dwg. Is there a way to increase the number of points displayed? The properties of the cloud say there is 14,000,000, but it only displays 34,000. Is there a way to increase the 34,000 number? See Image.
View 2 Replies View RelatedI know that there is a limitation on the numbers of points added to a surface from a point cloud. But I'm curious how Civil 3D determines which points to exclude from the surface. Is there a special alorithm/criteria the software uses?
View 1 Replies View Relatedhow can I get a .dwg file of point cloud, to work on the Revit?
View 1 Replies View RelatedWhen we use Point Cloud Feature Extraction for Autodesk® Revit® 2012 in our machine in a central file with the pcg file then there is a Run time error shown in revit. But if we work in a single file then the problem does not occur. How we ovecome this situation?
View 1 Replies View RelatedWe are trying to import Point Cloud files having extension .fls into Revit 2012 but are unable to do so. We have attached the screen shots of the messages that we are getting while importing. We have the trial version of Revit Architecture 2012 and need to import the files so that we can convert them to rvt files...
View 9 Replies View Relatedhow to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
AutoCAD 2011. C#
How to access the point positions within a Point Cloud using C#? Or is this function not provided in the managed class?
i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
how to access the positions of every points in pointcloud(.pcg files)?
Isn't it available in ObjectARX.NET 2012?or should I write my own warpper for .NET?
I started rendering using 360 cloud a few weeks ago. I've done lots of renders, all working fine until a few days ago.Now when i submit a render to the cloud in Revit 2014, it takes forever to process and then says either"could not complete your request, failed to authenticate" or something similar but with "could not upload file" as well.
I have tried logging out and clearing my browser cache etc but it still wont work.
I have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies View Relatedi have any problem about export point from dwg to *.txt file.i have point file *.dwg from my friend,,but i confused why that point can't export, show warning "No point were transferred from the source" point is in layer 0...I attach the dwg file.
View 5 Replies View Related