I might be missing somehting completely, but I am reading with Civil 3D 2013 you should be able to clip a Point Cloud, but I am not seeing the clipping panel under the point cloud tab.
View 1 Repliesi need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
I see that the Point Cloud Feature Extraction is now part of the Productivity Tools for Civil 3d 2012. Are these tools available in 2013? I am not seeing them anywhere. It seems goofy that there would be more tools available for the old release - what's the incentive to make the switch? Would you expect they will be available for 2013 sometime soon? I'm not complaining, I really like 2012
View 4 Replies View RelatedSee pic. Top pic is 2013 point cloud properties. bottom pic is 2011 point cloud properties. 2013 has a new 'point cloud adjust' option in properties.
Both drawings have same 'Lidar Classification' Style, but 2013 is all gray. I tried changing some fields inside the properties for 2013 under the point cloud adjust to no avail.
why this is like this and what I need to do to see the different colors for the different classifications.
In ACAD 2013 When selecting a block that is xclipped the xclip boundary is visible as a dashed, editable line. The editable dashed line is also selectable even though it is not visible when the block is not selected.
Is there a way to turn off the selectablity of the xclip boundary, so that I am not selecting blocks when I click near the xclip boundary limits even when I have my XCLIPFRAME set to 0 and the boundary is not visible?
I'm working with a point cloud in 2013. The color comes in when I convert to .pcg and import into Revit. But I can't get the color to display in CAD. I've heard it may be a visual style problem, or a setting in my hardware acceleration, but nothing seems to work.
View 2 Replies View RelatedI have a problem with the management of the cloud of points with autocad 2013. and precisely:
- What is my need: using orthogonal views create section planes of small portions of a cloud to be scanned.
- What is my problem: When I align a view, the bounding box is not aligned to the same, so this involves a wrong cut plane to create the section
I have been searching for a solution to a problem i have been having. I have a point cloud, and I am wanting to TIN it to create a surface.
When I use the Create Surface tool, no dialog box appears. Everything I have found seems to rely on this Dialog Box. How to get it to display?
Using AutoCad Civil 3D 2011.
Point Cloud Index fails on Faro Scans that work in 2012???? Tools in 2013 seem better. Civil 3D and Point Cloud data.
View 4 Replies View RelatedUsing Civil 3D 2013, Faro Scene 4.8.2.25521, Kubit PointCloud Pro 8.0.4.7.
Is it possible to turn off the bounding box on a non-Civil 3D, .PCG point cloud that was indexed into Civil 3d directly from the Faro .FWS file using the "POINTCLOUDINDEX" command?
How can I rotate my point cloud to have the front view on the top. I want to optimize the surface creation on the lateral surface of a deck and not on the ground (top) surface. I think to rotate 90 degrees on the X or Y axis.
View 3 Replies View RelatedCivil 3D point cloud tools (ribbon) are different than AutoCAD's. Is there a way to bring up AutoCAD's point cloud ribbon in addition to Civil 3D's ribbon?I guess if the commands are the same, I can just copy the ribbon from AutoCAD's CUI and plop it into Civil 3D's CUI.
But, is there a better way or is there something I'm missing?I'm looking for the clipping tools and the point cloud display otions (scan colors, elevation, normal, intensity, etc.)
I am working with a Lidar dataset that is over 34 million points. It covers an area far larger than I need for our project. I have experimented with point clouds and am able to process and generate a surface from the data by applying a clip boundary to the surface. The problem with this is the surface only has about 540k points out the total dataset and it appears that the points have been greatly reduced in density. I am thinking this is due to the way C3D limits large data sets to display only 1.5 million points and thus my surface data is highly filtered since it is extracted from a small area of the dataset. I have tried setting point cloud display to 100%.
can I somehow filter my point cloud so that I can reduce the area of coverage and thus increase the density that is extracted into my surface?
while i am trying to load my point cloud files the points appeared in the model but not all points
i entered to the setting of the point cloud from the toolspace toolbar , i found that there are about 32 million points but only 700000 points are displayed in the drawing. Is there a way to display all the loaded points in my drawing to show all the points since i need to render a high resolution pictures for my lots.
I have a point cloud with 161 million points in it. This is basically fine and works well but I need to create equally high resolution surfaces from certain regions of the point cloud. No matter what size I choose my export shape, it will only create a surface from a ridiculously small 750,000 odd points, a 'feature' which has been documented on these forums before. I have POINTCLOUDDENSITY set to 100.
My question is, how can I build a surface from this high resolution point cloud data that has more than 750,000 odd points?
I'm thinking about mosaic'ing - ie. making several smaller surfaces over the required area and pasting them together.
2012 SP2. I get this very descriptive message while trying to create a point cloud: The following error occurred processing the point cloud data: An error ocurred in data processing.
I've previously created point clouds from the same data (ENZ comma delimited) without a problem. I believe this was done before applying SP2. Any problems creating point clouds since SP2?
My surveyor gave me a Trimble .tsf point cloud file....how do I convert that dude to an AutoCAD .las file?
View 2 Replies View RelatedWhen I try to index a Faro fls or fws file the process fails with the error message "Point Cloud File Indexing has Errors".
Civil 3D 2012
HP Z210
OS Windows 7 64 Bit
Core i7 16GB Ram
I have a surface based on a point cloud. I decided to add a few more tiles of data to the point cloud and was expecting that the surface would update (after rebuilding) to include the new extents - but there was no change. The surface doesn't have any boundaries or breaklines but does have edits.
Do I need to add points to surface again? Will this duplicate the orignal point data or would it just add the new data. I didn't want to lose my edits if possible.
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
It was in Feb - March 2012. I was then using AutoCAD Civil 3D 2012. I had faced a problem of getting ground data for a large surface by using satellite imageries processed by some government wing of USA (NASA?), have lost track of it.
View 6 Replies View RelatedI have a point cloud dwg. Is there a way to increase the number of points displayed? The properties of the cloud say there is 14,000,000, but it only displays 34,000. Is there a way to increase the 34,000 number? See Image.
View 2 Replies View RelatedI know that there is a limitation on the numbers of points added to a surface from a point cloud. But I'm curious how Civil 3D determines which points to exclude from the surface. Is there a special alorithm/criteria the software uses?
View 1 Replies View RelatedI had several rectangular viewports created which resides on the vport layer that is set to not print. I wanted to convert these viewports to a clipped polygonal vewport. I drew the polyline and clipped the viewport to that object and it worked for most of them.
If I had moved my polyline/object I was to clip the viewport into onto the vport layer before clipping, the process worked fine and the viewport border would not print. However if I had the polyline object border on layer 0 and then clipped the viewport, the viewport border (even though still on the vport layer set to not print) would then print/not display.
This time it was only a couple of viewports which I manually recreated, although for future reference is there a fix/trick to get around this if one forgets to move the polyline to be clipped onto the vport layer first before clipping?
In uploading the Point input data into the AutoCAD Civil 3D 2013 software program, is it possible for me to add more Point Attribute items after Point Number, X, Y, Z? I need to have the chemical results/data attached to the (sampling) Point that has the Point #, X, Y, Z - like Point Number, X, Y, Z, Arsenic, Lead, Mercury in the input .txt (or .csv) file.
View 9 Replies View RelatedI'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
how to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
AutoCAD 2011. C#
How to access the point positions within a Point Cloud using C#? Or is this function not provided in the managed class?
happens with two different images. Haven't done any system updates for a week or more, nor added any actions or plugins. I do have a Wacom tablet that occasionally runs amok* until I unplug and replug its USB cable. It did that recently, but can't remember when. I can clip two layers by using opt+click on the little icon that loads an adjustment layer. Running PSCS6 v 13.0 64 bit on an iMac with OSX 10.7.4, 650 GB disk storage (639 GB capacity, 134 GB available), 4 GB RAM.
View 1 Replies View Relatedhow to access the positions of every points in pointcloud(.pcg files)?
Isn't it available in ObjectARX.NET 2012?or should I write my own warpper for .NET?
I used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
I was using this in 2011 to match label rotation of an existing point but it no longer works in 2013? What is the value I need to grab and set or will this format not work in 2013,
(defun c:mro (/ doc ss ss2 obj obj2 newrot oldrot)
(vl-load-com)
(setq doc (vla-get-activedocument (vlax-get-acad-object))) (vla-startundomark doc)
(princ "
Select point to match the rotation of to: ")
(setq ss2 (ssget "" '((0 . "AECC_COGO_POINT"))))
(setq obj2 (vlax-ename->vla-object (ssname ss2 0)))
[code].....