AutoCAD Map 3D :: How To Delete Index File For Point Cloud Data
Jul 16, 2013
I'm hoping this could be a quick fix without completely reinstalling CAD.
I jammed too much LiDAR data into my Index file for point cloud data, and now I can not even open it. Even new drawings are trying to open the overall index with everything in it.
What I want to do is just delete the whole thing and start fresh again, but not sure how to do that. If I could open it once I could start deleting stuff from it, but it is too large to even open.
View 1 Replies
ADVERTISEMENT
Aug 7, 2012
Point Cloud Index fails on Faro Scans that work in 2012???? Tools in 2013 seem better. Civil 3D and Point Cloud data.
View 4 Replies
View Related
Dec 9, 2011
Any (simple) raw point cloud data file.
View 2 Replies
View Related
Jul 10, 2012
2012 SP2. I get this very descriptive message while trying to create a point cloud: The following error occurred processing the point cloud data: An error ocurred in data processing.
I've previously created point clouds from the same data (ENZ comma delimited) without a problem. I believe this was done before applying SP2. Any problems creating point clouds since SP2?
View 1 Replies
View Related
Jun 13, 2012
I am looking for some good article/location on creating acad plugins for using point cloud data.
View 3 Replies
View Related
Jul 12, 2012
It was in Feb - March 2012. I was then using AutoCAD Civil 3D 2012. I had faced a problem of getting ground data for a large surface by using satellite imageries processed by some government wing of USA (NASA?), have lost track of it.
View 6 Replies
View Related
Mar 14, 2012
My surveyor gave me a Trimble .tsf point cloud file....how do I convert that dude to an AutoCAD .las file?
View 2 Replies
View Related
Apr 19, 2012
When I try to index a Faro fls or fws file the process fails with the error message "Point Cloud File Indexing has Errors".
Civil 3D 2012
HP Z210
OS Windows 7 64 Bit
Core i7 16GB Ram
View 1 Replies
View Related
Apr 9, 2012
how can I get a .dwg file of point cloud, to work on the Revit?
View 1 Replies
View Related
Jun 6, 2012
When we use Point Cloud Feature Extraction for Autodesk® Revit® 2012 in our machine in a central file with the pcg file then there is a Run time error shown in revit. But if we work in a single file then the problem does not occur. How we ovecome this situation?
View 1 Replies
View Related
May 18, 2011
We are trying to import Point Cloud files having extension .fls into Revit 2012 but are unable to do so. We have attached the screen shots of the messages that we are getting while importing. We have the trial version of Revit Architecture 2012 and need to import the files so that we can convert them to rvt files...
View 9 Replies
View Related
Apr 5, 2012
i want to delete unwanted reference file (xref) information outside boundary of a current drawing.using civil 3D or autocad.
View 1 Replies
View Related
Jul 5, 2010
I have collected point data for the positions of trees using PocketGIS software. The software produces a csv. file with the Northings and eastings of each point surveyed to which are attached a number of other attributes (e.g. tree tag number, height, species etc.).
Is it possible to import and plot these points directly into AutoCAD?
Can some or all of the attributes be included (i.e. it would be very useful if the positions could be plotted together with the tag number)?
View 9 Replies
View Related
May 30, 2012
how to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
View 3 Replies
View Related
Mar 29, 2010
AutoCAD 2011. C#
How to access the point positions within a Point Cloud using C#? Or is this function not provided in the managed class?
View 2 Replies
View Related
Jan 2, 2013
how to show point labels on the points I imported from a .shp file. I used MAPIMPORT and brought in the associated object data but I don't know how to get it to display in my drawing.
View 7 Replies
View Related
Apr 6, 2012
how to access the positions of every points in pointcloud(.pcg files)?
Isn't it available in ObjectARX.NET 2012?or should I write my own warpper for .NET?
View 5 Replies
View Related
Jun 11, 2013
Every time I want ro start LR5 I have to delete the preference file in C User data Roaming adobe lightroom other wise LR5 just hangs at strt up screen. This is a right royal pain as it means I have to re do my preferences in the program every time I use it ?
View 2 Replies
View Related
Aug 9, 2012
I want to create an AutoCAD point clound (.pcg) from a FARO laser scan file (.fls). When I go through the steps in AutoCAD Mechanical 2013, I get the following error (see attached file for screen shot):
Progress.......
Failure! - Fail to open scan file.
Complete, 0 point cloud created, 1 failed.
View 1 Replies
View Related
Jan 17, 2013
I have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
View 6 Replies
View Related
May 6, 2008
I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
"Could not load the user measurement data point presets file because the file name was not valid."
and "Could not load the user measurement scale presets file because the file name was not valid."
View 2 Replies
View Related
Jan 20, 2011
how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".
Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable.
I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.
I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.
I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.
Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
View 9 Replies
View Related
Mar 8, 2011
I can get my stylised map from Promap into Map3d 2011, and I have tried importing the point cloud data which I have as a esri ascii grid file, it is basically 3 columns of numbers:- for north, east and height.
Unfortunately when I choose to format as nez (when importing) it turns the whole lot round by 90degrees ...
I have tried importing it as enz but no joy, and also in niether case will it align with my map (have tried using coords and not using coords).
View 5 Replies
View Related
Mar 27, 2012
I use POINTCLOUDINDEX to convert .las file to .pcg file, then I use POINTCLOUDATTACH to add .pcg file to model space.
How can I get the 3d coordinates of points in .pcs files?
I use ObjectARX in .net.
I can't find any Entity types related to pointcloud, should I find in other namespace?
View 2 Replies
View Related
Jan 3, 2012
I am trying to trace part of my point cloud, which has been aligned according to a new UCS I set. Drawing on the top down view, a poly line works fine out in the black ether or the model space, however when I attempt to trace over the point cloud it shoots way off in the distance.
My node snapping is turned off of course, but this only happens when I click over a part of the point cloud, as if it was snapping to the cloud and getting confused.
When I turn snapping off completely I can click anywhere I want and I'm fine. This suggests to me that it is a snapping issue, although I was under the assumption that "Node" was the only snap setting that related to point clouds.
View 0 Replies
View Related
Apr 20, 2012
AutoCAD 2013 point clouds can have a 3D bounding box displayed, and you can grab the grips to edit the box, x, y and z. It's a nice feature.
Using vb.net, will I be able to programmatically move those bounding box points?
View 1 Replies
View Related
Dec 11, 2011
I have been searching for a solution to a problem i have been having. I have a point cloud, and I am wanting to TIN it to create a surface.
When I use the Create Surface tool, no dialog box appears. Everything I have found seems to rely on this Dialog Box. How to get it to display?
Using AutoCad Civil 3D 2011.
View 5 Replies
View Related
May 18, 2012
Using Civil 3D 2013, Faro Scene 4.8.2.25521, Kubit PointCloud Pro 8.0.4.7.
Is it possible to turn off the bounding box on a non-Civil 3D, .PCG point cloud that was indexed into Civil 3d directly from the Faro .FWS file using the "POINTCLOUDINDEX" command?
View 2 Replies
View Related
Mar 19, 2013
Supposedly there's a way "To Convert One or More Surfaces to Solids":
[URL]
However, I'm unable to find Home tabSolid Editing panelThicken.
I'm trying to take LIDAR/Point Cloud data and 3D print it (in the end, I need to make an STL file). I've created a 3D surface from Point Cloud data which results in a Raster Layer. I do not know how to convert the surface that's in the Raster Layer into a solid.
View 4 Replies
View Related
May 23, 2012
How can I rotate my point cloud to have the front view on the top. I want to optimize the surface creation on the lateral surface of a deck and not on the ground (top) surface. I think to rotate 90 degrees on the X or Y axis.
View 3 Replies
View Related
Nov 22, 2011
I was wondering if there is a way to select specific 3D points out of a point cloud (.pcg). I am new with Autocad and handling of point clouds .
I can think of various things that you might want to do, as in clean up a bit the data or even delete some areas that you are not interested with. additionally, one might want to do some calculations, so selecting points first and the running a list script to use that points can be handy as well.
View 1 Replies
View Related
