I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
"Could not load the user measurement data point presets file because the file name was not valid."
and "Could not load the user measurement scale presets file because the file name was not valid."
I have 2x user presets (one for each of 2x camera's), which I use to apply to images on Import.
When moving a catalog from my laptop (rMPB) to the desktop (iMac) (created of just one image folder), using the export / import catalog routine, these presets just list as "unavailable preset" in the Develop Status metadata sorting options in the library module.
I have exported these presets from the laptop and imported them to the desktop and then re- exported/imported the catalog but the results are the same. Is there a way for these presets to be recognized and sorted by correctly when importing a catalog?
I am taking measurements of a large site plan for a report. However, after I save and exit the image, it clears the measurement log. In other words, after saving and exiting, and then reopening the image, the measurement log is clear. I can save the measurement log as a text file, but when I reopen the image, the data isn't there and I cannot find a way to link it back to the image. Is there a way to save the data with the image?
I am using CS4 Extended on Windows 8.
Every time I want ro start LR5 I have to delete the preference file in C User data Roaming adobe lightroom other wise LR5 just hangs at strt up screen. This is a right royal pain as it means I have to re do my preferences in the program every time I use it ?
View 2 Replies View RelatedI'm using Photshop CS5.1 on my Mac (OSX 10.5.8) and don't seem to be able to load tpl files.
I put the file in Photoshop's "presets -> tools" folder and tried to open it via the brush presets picker. When I browse for the file, only ABR files are shown, TPLs are greyed out.
I have collected point data for the positions of trees using PocketGIS software. The software produces a csv. file with the Northings and eastings of each point surveyed to which are attached a number of other attributes (e.g. tree tag number, height, species etc.).
Is it possible to import and plot these points directly into AutoCAD?
Can some or all of the attributes be included (i.e. it would be very useful if the positions could be plotted together with the tag number)?
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
how to show point labels on the points I imported from a .shp file. I used MAPIMPORT and brought in the associated object data but I don't know how to get it to display in my drawing.
View 7 Replies View RelatedAny (simple) raw point cloud data file.
View 2 Replies View RelatedMy user presets do not appear in LR4 since I installed the LR5 Beta, but they do show up in LR5. How do I get them back into LR4?
View 1 Replies View RelatedI am getting the following error message when I try and load my personal presets "COULD NOT LOAD TOOL PRESETS BECAUSE THE SAMPLED DATA COULD NOT BE FOUND" I have been able to load this in the past and it is now giving me this error.
I am running CS6 extended 13.01 for 64 bit . I have 12 mg ram and working with Windows 7
I'm hoping this could be a quick fix without completely reinstalling CAD.
I jammed too much LiDAR data into my Index file for point cloud data, and now I can not even open it. Even new drawings are trying to open the overall index with everything in it.
What I want to do is just delete the whole thing and start fresh again, but not sure how to do that. If I could open it once I could start deleting stuff from it, but it is too large to even open.
I want to create a user preset for exporting full size jpegs to a folder to be named later. Whenever I try and save it Lightroom defaults to email.
Here are my settings:
Lightroom 4.2
export to hard drive
choose folder later
jpeg format
Adobe RGB
quality=95
How to import metadata user presets from another Lightroom catalog?
View 2 Replies View RelatedI had a folder with a lot of presets in Lightroom 5. When I start the program I only see the Lightroom presets and a couple of presets I made earlier. I started all the backups I made since Lightroom 5 but none starts with the bundle of presets I want. Is there something I can do to start the program again with all my presets? By the way, I see all the presets-names I made in the Lightroom-presets map (in the folder Develop-presets more specified).
View 3 Replies View RelatedOn Windows, it is possible to move the presets folder to a user-defined location?
By default the presets folder is located at C:UsersusernameAppDataRoamingAdobe. I use Lightroom on both a desktop and laptop and ideally I'd like to sync the presets between them by moving the presets folder to my SkyDrive folder. This way if I create a new preset on one device, it will automatically sync to the other device via SkyDrive.
Yes I realize I can store presets within the catalog folder and I could move my catalog to a SkyDrive folder which would technically accomplish my goal. However that would require sync'ing my entire catalog which I do not want to do; that would generate a lot of syncing traffic back and forth all the time. So I want my catalog and my presets in seperate locations, and I want to define where my presets are stored, which I haven't seen an option for.
Text animation presets do not load in After Effects CC (or Adobe Bridge when browsing presets). They don't show up in Effects & Presets panel. I believe they used to show up but no longer. They are in the presets folder so I'm not sure why they won't load in either program.
View 2 Replies View RelatedIm using a mel script to automate basic scene parameters. For some reason though, after I run a setAttr on defaultRenderGlobals.currentRenderer, I cant apply a loaded preset until after I manually open the renderGlobals and select one of the mentalray tabs. Im running "loadNodePresets "basicSet";" as the last line of my scene builder script. What is the proper way to load the preset without manually opening the renderGlobals window?
View 1 Replies View RelatedI have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
I'm wanting to use a diffuse colour to alter the iterations in the mesh smooth modifier. I'm using the wire parameters dialogue but am unsure of how to turn the 3 point value of the diffuse (rgb) into linear (1 point) data.
Work Computer - Max 2012, Core i7 3.6, 6GB RAM, ATI FireGL V7700 512MB, Windows 7 64bit
Home Computer -BBC Electron with tape player and a copy of creepy cave
how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".
Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable.
I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.
I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.
I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.
Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
How can I create a setup for autocad map application. I just want to load the tool (dot net Arx C#) application from user installation directory.
View 6 Replies View RelatedI'm trying to manage a list of strings at the application level.
The list is to be created/updated/deleted by a command passed on any open drawing. The list is transient, doesn't survive the closing of AutoCAD.
I must have only one copy of this list for all documents, NOT one list per document, as described in [URL]
After finishing a part in Inventor 2014 a want to store it as a STL file. Thats no problem but when the part is saved as STL it measurement don't add up any more. The STL file becomes a factor 10 smaller. So 50mm ends up as 5mm. So thats a problem.
View 3 Replies View RelatedIs there any chance to get user defined properties using .NET API for civil 2012?
View 9 Replies View Relatedi am following the new feature of CIVIL3D 2013. i have some problems with making user defined properties.
when i make a lable style for figure, lable style should be selected.
But i don't know how to make a properties for text of lable style.
see image below. i select the add labels of annotate ribon -> figur -> add figure labels -> edit section of line label style -> layout tap -> contents below text -> you can see the owership which is user defined properties.how to make that properties?
I need my users to pick a point p, enter a distance r and a direction v. A new point should be created r units away in vectorial direction. Therefore, the new point is located on an imaginary circle with radius r and center p.
Currently, the user picks the first point and enters a distance. Then, he has to pick another point (Editor.GetPoint with UseBasePoint = true), I calculate the vector between both points, create a new point (with location = BasePoint.location) and translate it d units in vectorial direction. This works of course, but the problem is, that the user doesn't see directly, where his new point is located, since he may pick a point closer to or farther away then r units.
Naively spoken, I want to restrict the line between BasePoint and new point while prompting the user to a fixed length. Native calls to ObjectARX-methods would be also okay.
Before when I was creating models the origin (0,0,0) was always set in the snap point i started the line in. Now suddenly something happend and now 0,0,0 is always starting in the Original XYZ point.
How do I get back to the old settings?
Is there a plugin that will allow the loading of binary data as an image?
There is a similar capability in Photoshop and PainShopPro. I'm not writing about a RAW image loader ( to handle camera data ). I'm writing about a loader for a data matrix.
For example, I have 8-bit data, a 257x257 matrix, that can be viewed as 8-bit greyscale, and could then be assigned a palette in PSP version 8. After reworking the data visually, it could be resaved as a binary matrix without the palette, resulting in a new 257x257 matrix.
I deal with flight simulator data, and often have use to edit land classification data this way. I can do it in PSP8, but I much prefer wortking with Paint.net
I also deal with 16 bit data for elevation... I don't know if Paint.net even would have this capability.
A short time before Adobe released Lightroom 5, Flickr announced that it is enhancing its service by offering 1TB for free to regular users and (most important for me) expanding the limit for videos to 1GB, which full playback and embedding support. The previous video size limit was 500MB. Unfortunately, LR5 will not let me publish my videos to Flickr because LR5 is enforcing the old file size limits. Is this something that can be changed in a configuration setting somewhere? Or do we need these constraints updated in an upcoming patch?
The Flickr integration is huge for me. Having limited storage, I need to offload data to cloud storage whenever possible. Flickr is a great value in media storage.
“Linetype” file” and “measurement” value are not listed in the properties pane..I’m wondering why the AutoCAD
doesn’t show the “linetype” file (acad.lin/acadiso.lin) from which a particular linetype is takendoesn’t show the “measurement” value (0 or 1) when a particular object is drawn Why these properties are not set on the property pane?